{"title":"Datsun 240Z Body Panels","description":"\u003cp\u003eReplica steel for the Datsun 240Z (Nissan S30, 1969–1973) — one of the most rust-prone great sports cars ever built, and now one of the most valuable Japanese classics. This range covers the panels every S30 restoration needs: front fenders, hood, battery tray area, taillight surround panels and structural sections, pressed to original-style profiles in automotive steel.\u003c\/p\u003e\u003ch2\u003eWhy every 240Z needs steel\u003c\/h2\u003e\u003cp\u003eNissan built the S30 from thin-gauge unibody steel with minimal rust-proofing, and its box sections trap moisture by design. Floors and rails, doglegs, rockers, rear quarters, the battery tray and cowl, fender bottoms around the headlight buckets and the hatch surround all corrode — even on cars that look clean from three metres. Because the 240Z is a unibody, these aren't cosmetic repairs: the panels are the structure.\u003c\/p\u003e\u003ch2\u003eFitment notes\u003c\/h2\u003e\u003cp\u003ePanels listed 1969–1973 fit the 240Z; many pressings carry to the 260Z with detail changes at flanges and trim holes — compare before committing if your car is a later S30. Left- and right-hand-drive bodies share panels.\u003c\/p\u003e\u003ch3\u003eAre these panels suitable for high-point restoration?\u003c\/h3\u003e\u003cp\u003eThey're pressed to original-style profiles with matching seam and hole locations — the accepted standard for restorations where original service steel no longer exists.\u003c\/p\u003e\u003ch3\u003eIs welding required?\u003c\/h3\u003e\u003cp\u003eFor structural panels, yes — S30 unibody repairs should be welded at factory seams by a competent welder. The hood and fenders bolt on.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eBodyBros replica panels are aftermarket parts; vehicle names are used for fitment identification only. Related: \u003ca href=\"\/collections\/panels-fenders\"\u003efenders\u003c\/a\u003e · \u003ca href=\"\/blogs\/knowledge\/datsun-240z-rust-guide\"\u003e240Z rust guide\u003c\/a\u003e\u003c\/em\u003e\u003c\/p\u003e","products":[{"product_id":"datsun-240z-front-fender-lh","title":"Front Fender, LH – for Datsun 240Z (Steel)","description":"\u003cp\u003eA direct-fit replica front fender for 1969-1973 Nissan \/ Datsun 240Z restorations, left-hand (LH) side. Stamped in steel to original-style contours so it lines up with existing seams, gaps and hardware locations — the fastest route from rust bucket to straight body without sacrificing a donor car.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFits\u003c\/th\u003e\n\u003ctd\u003eNissan \/ Datsun 240Z\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eYears\u003c\/th\u003e\n\u003ctd\u003e1969-1973\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePanel type\u003c\/th\u003e\n\u003ctd\u003eFenders \u0026amp; Guards\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eSteel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSide\u003c\/th\u003e\n\u003ctd\u003eLE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSKU\u003c\/th\u003e\n\u003ctd\u003eSYC-NS42-05L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eSupplied ready for prep and paint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eInstallation\u003c\/th\u003e\n\u003ctd\u003eEasy to Moderate — approx. 2–4 hours per side\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWelding required\u003c\/th\u003e\n\u003ctd\u003eNo — bolt-on \/ transfer fit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eThis fender fits the \u003cstrong\u003eNissan \/ Datsun 240Z\u003c\/strong\u003e, model years \u003cstrong\u003e1969-1973\u003c\/strong\u003e. Panels listed 1969–1973 fit the 240Z (S30); many pressings carry over to the 260Z with detail changes — compare flange and trim-hole locations if fitting to a later S30. The 240Z is a unibody: structural panels should be welded in at factory seams by a competent welder.\u003c\/p\u003e\u003cp\u003eAs with any reproduction panel, trial-fit against the vehicle before final welding or paint. Minor adjustment at flanges and mounting points is a normal part of professional panel fitting, even with precision replica pressings.\u003c\/p\u003e\u003ch2\u003eThe maths of new steel\u003c\/h2\u003e\u003cp\u003eRestorers rarely regret buying a new panel; they regret the three weekends spent trying to save an old one first. Repairing a corroded fender means paying for blasting, fabrication time and filler — and the result is still fifty-year-old metal. A replica pressing costs a known amount, arrives straight, and spares a donor vehicle from being cut up for parts. Your original panel can stay with the vehicle for provenance; your build gets metal you can trust.\u003c\/p\u003e\u003ch2\u003eAbout the Nissan \/ Datsun 240Z\u003c\/h2\u003e\u003cp\u003eThe Datsun 240Z (Nissan S30, 1969–1973) changed the sports car market: a 2.4-litre overhead-cam six, independent suspension and coupe styling at a price that undercut everything from Europe. It also became one of the most rust-prone classics of its era. Nissan's thin-gauge unibody steel, minimal factory rust-proofing and moisture-trapping box sections mean that nearly every surviving S30 needs structural and cosmetic sheet metal during restoration. With concours 240Z values now well into six figures, correctly stamped reproduction panels have become essential to the market.\u003c\/p\u003e\u003cp\u003eThe S30 rusts everywhere moisture settles: floor pans and frame rails, dogleg and rocker sections, rear quarters and wheel arches, the battery tray and surrounding cowl, front fenders around the headlight buckets, and the hatch slam panel. Because the 240Z is a unibody, replacing corroded panels properly — with correct-profile steel welded at factory seam locations — is a structural repair, not just a cosmetic one.\u003c\/p\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eDifficulty:\u003c\/strong\u003e Easy to Moderate  |  \u003cstrong\u003eTypical time:\u003c\/strong\u003e 2–4 hours per side  |  \u003cstrong\u003eWelding required:\u003c\/strong\u003e no.\u003c\/p\u003e\u003cp\u003eMost classic 4x4 and truck fenders bolt on. Strip the lights and trim from the old panel, test-fit the new fender loose, and set the gaps against the door and hood before final tightening — fender-to-door gap is the one everyone sees. Seal the mounting flanges and inject cavity wax along the lower edge, which is where the original died.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTools:\u003c\/strong\u003e basic hand tools, panel clips, seam sealer, cavity wax.\u003cbr\u003e\u003cstrong\u003eCommon mistakes to avoid:\u003c\/strong\u003e bolting up tight before gapping, forgetting anti-corrosion treatment on the hidden flanges, and re-using crushed mounting hardware.\u003c\/p\u003e\u003ch2\u003eQuality \u0026amp; Manufacturing\u003c\/h2\u003e\u003cp\u003eBodyBros replica panels are pressed on dedicated tooling developed from measured original panels, in automotive-grade material matched to the application. Pressings are checked against reference bucks for profile, flange geometry and hole placement before packing. Steel panels are supplied with a protective primer coating ready for preparation and refinishing; alloy and plastic parts are supplied ready to prepare and paint. These are aftermarket replica restoration parts — manufactured by BodyBros, not by the original vehicle maker.\u003c\/p\u003e\u003ch2\u003eWorldwide Delivery\u003c\/h2\u003e\u003cp\u003eWe ship worldwide — including the United States, Canada, the UK, Europe, Australia and New Zealand. Panels are packed in purpose-built cartons or timber crates depending on size; large assemblies travel by sea or air freight with tracking. Duties and taxes are calculated at checkout or on arrival depending on destination. See our \u003ca href=\"\/pages\/shipping\"\u003eShipping \u0026amp; Delivery\u003c\/a\u003e page for lead times to your region.\u003c\/p\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003ch3\u003eWill this fender fit my Nissan \/ Datsun 240Z?\u003c\/h3\u003e\u003cp\u003eIt fits 1969-1973 models as listed above. Panels listed 1969–1973 fit the 240Z (S30); many pressings carry over to the 260Z with detail changes — compare flange and trim-hole locations if fitting to a later S30. The 240Z is a unibody: structural panels should be welded in at factory seams by a competent welder.\u003c\/p\u003e\u003ch3\u003eIs welding required to install it?\u003c\/h3\u003e\u003cp\u003eNo. This part installs as a bolt-on or transfer fit using standard hand tools — see the installation notes above.\u003c\/p\u003e\u003ch3\u003eCan it replace a rusted original panel?\u003c\/h3\u003e\u003cp\u003eYes — that is exactly what it is made for. The Nissan \/ Datsun 240Z commonly rusts in floor pans and rails, doglegs and rockers, rear quarters, the battery tray area, front fenders and the hatch surround, and this replica pressing replaces corroded original metal with new steel — no donor vehicle required.\u003c\/p\u003e\u003ch3\u003eDo you ship this internationally?\u003c\/h3\u003e\u003cp\u003eYes. We ship worldwide with tracked freight; larger panels and assemblies travel in purpose-built crates. Delivery times and freight options for your country are shown at checkout and on our Shipping page.\u003c\/p\u003e\u003ch3\u003eWhat finish does the panel arrive in?\u003c\/h3\u003e\u003cp\u003eIt arrives ready for preparation and paint. Like any replacement body panel, it should be test-fitted, prepared and refinished before final installation.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eBodyBros is an independent manufacturer of replica restoration panels. Vehicle make and model names are used for fitment identification only; BodyBros products are aftermarket parts and BodyBros is not affiliated with or endorsed by Nissan.\u003c\/em\u003e\u003c\/p\u003e\u003cp\u003e\u003cem\u003eExplore more: \u003ca href=\"\/collections\/datsun-240z\"\u003eall Nissan \/ Datsun 240Z panels\u003c\/a\u003e · \u003ca href=\"\/collections\/panels-fenders\"\u003efenders \u0026amp; guards\u003c\/a\u003e · \u003ca href=\"\/blogs\/knowledge\/choosing-reproduction-body-panels\"\u003ehow to choose reproduction panels\u003c\/a\u003e\u003c\/em\u003e\u003c\/p\u003e","brand":"BodyBros","offers":[{"title":"Default Title","offer_id":44126707417153,"sku":"SYC-NS42-05L","price":500.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/1468\/8321\/files\/SYC-NS42-05L_3ae987f1-f4b8-4371-b365-37da0a8d1ff0.jpg?v=1783303472"},{"product_id":"datsun-240z-front-fender-rh","title":"Front Fender, RH – for Datsun 240Z (Steel)","description":"\u003cp\u003eThis front fender is a precision replica fender made to suit the Nissan \/ Datsun 240Z (1969-1973), pressed in steel to the original-style profile for the right-hand (RH) side. Instead of spending weekends cutting rust out of fifty-year-old steel — or hunting down a donor vehicle for one usable panel — you start with straight, new metal that is ready for preparation and paint.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFits\u003c\/th\u003e\n\u003ctd\u003eNissan \/ Datsun 240Z\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eYears\u003c\/th\u003e\n\u003ctd\u003e1969-1973\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePanel type\u003c\/th\u003e\n\u003ctd\u003eFenders \u0026amp; Guards\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eSteel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSide\u003c\/th\u003e\n\u003ctd\u003eRI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSKU\u003c\/th\u003e\n\u003ctd\u003eSYC-NS42-05R\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eSupplied ready for prep and paint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eInstallation\u003c\/th\u003e\n\u003ctd\u003eEasy to Moderate — approx. 2–4 hours per side\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWelding required\u003c\/th\u003e\n\u003ctd\u003eNo — bolt-on \/ transfer fit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eThis fender fits the \u003cstrong\u003eNissan \/ Datsun 240Z\u003c\/strong\u003e, model years \u003cstrong\u003e1969-1973\u003c\/strong\u003e. Panels listed 1969–1973 fit the 240Z (S30); many pressings carry over to the 260Z with detail changes — compare flange and trim-hole locations if fitting to a later S30. The 240Z is a unibody: structural panels should be welded in at factory seams by a competent welder.\u003c\/p\u003e\u003cp\u003eAs with any reproduction panel, trial-fit against the vehicle before final welding or paint. Minor adjustment at flanges and mounting points is a normal part of professional panel fitting, even with precision replica pressings.\u003c\/p\u003e\u003ch2\u003eSkip the rust bucket rescue\u003c\/h2\u003e\u003cp\u003eThe oldroute to a straight Nissan \/ Datsun 240Z body was buying a second parts vehicle and hoping its fender was better than yours. That gamble costs storage, freight and usually disappointment — donor panels carry the same decades of corrosion in the same places. New replica steel ends the cycle: predictable cost, predictable fit, and every panel of your actual vehicle preserved.\u003c\/p\u003e\u003ch2\u003eAbout the Nissan \/ Datsun 240Z\u003c\/h2\u003e\u003cp\u003eThe Datsun 240Z (Nissan S30, 1969–1973) changed the sports car market: a 2.4-litre overhead-cam six, independent suspension and coupe styling at a price that undercut everything from Europe. It also became one of the most rust-prone classics of its era. Nissan's thin-gauge unibody steel, minimal factory rust-proofing and moisture-trapping box sections mean that nearly every surviving S30 needs structural and cosmetic sheet metal during restoration. With concours 240Z values now well into six figures, correctly stamped reproduction panels have become essential to the market.\u003c\/p\u003e\u003cp\u003eThe S30 rusts everywhere moisture settles: floor pans and frame rails, dogleg and rocker sections, rear quarters and wheel arches, the battery tray and surrounding cowl, front fenders around the headlight buckets, and the hatch slam panel. Because the 240Z is a unibody, replacing corroded panels properly — with correct-profile steel welded at factory seam locations — is a structural repair, not just a cosmetic one.\u003c\/p\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eDifficulty:\u003c\/strong\u003e Easy to Moderate  |  \u003cstrong\u003eTypical time:\u003c\/strong\u003e 2–4 hours per side  |  \u003cstrong\u003eWelding required:\u003c\/strong\u003e no.\u003c\/p\u003e\u003cp\u003eMost classic 4x4 and truck fenders bolt on. Strip the lights and trim from the old panel, test-fit the new fender loose, and set the gaps against the door and hood before final tightening — fender-to-door gap is the one everyone sees. Seal the mounting flanges and inject cavity wax along the lower edge, which is where the original died.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTools:\u003c\/strong\u003e basic hand tools, panel clips, seam sealer, cavity wax.\u003cbr\u003e\u003cstrong\u003eCommon mistakes to avoid:\u003c\/strong\u003e bolting up tight before gapping, forgetting anti-corrosion treatment on the hidden flanges, and re-using crushed mounting hardware.\u003c\/p\u003e\u003ch2\u003eQuality \u0026amp; Manufacturing\u003c\/h2\u003e\u003cp\u003eBodyBros replica panels are pressed on dedicated tooling developed from measured original panels, in automotive-grade material matched to the application. Pressings are checked against reference bucks for profile, flange geometry and hole placement before packing. Steel panels are supplied with a protective primer coating ready for preparation and refinishing; alloy and plastic parts are supplied ready to prepare and paint. These are aftermarket replica restoration parts — manufactured by BodyBros, not by the original vehicle maker.\u003c\/p\u003e\u003ch2\u003eWorldwide Delivery\u003c\/h2\u003e\u003cp\u003eWe ship worldwide — including the United States, Canada, the UK, Europe, Australia and New Zealand. Panels are packed in purpose-built cartons or timber crates depending on size; large assemblies travel by sea or air freight with tracking. Duties and taxes are calculated at checkout or on arrival depending on destination. See our \u003ca href=\"\/pages\/shipping\"\u003eShipping \u0026amp; Delivery\u003c\/a\u003e page for lead times to your region.\u003c\/p\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003ch3\u003eWill this fender fit my Nissan \/ Datsun 240Z?\u003c\/h3\u003e\u003cp\u003eIt fits 1969-1973 models as listed above. Panels listed 1969–1973 fit the 240Z (S30); many pressings carry over to the 260Z with detail changes — compare flange and trim-hole locations if fitting to a later S30. The 240Z is a unibody: structural panels should be welded in at factory seams by a competent welder.\u003c\/p\u003e\u003ch3\u003eIs welding required to install it?\u003c\/h3\u003e\u003cp\u003eNo. This part installs as a bolt-on or transfer fit using standard hand tools — see the installation notes above.\u003c\/p\u003e\u003ch3\u003eCan it replace a rusted original panel?\u003c\/h3\u003e\u003cp\u003eYes — that is exactly what it is made for. The Nissan \/ Datsun 240Z commonly rusts in floor pans and rails, doglegs and rockers, rear quarters, the battery tray area, front fenders and the hatch surround, and this replica pressing replaces corroded original metal with new steel — no donor vehicle required.\u003c\/p\u003e\u003ch3\u003eDo you ship this internationally?\u003c\/h3\u003e\u003cp\u003eYes. We ship worldwide with tracked freight; larger panels and assemblies travel in purpose-built crates. Delivery times and freight options for your country are shown at checkout and on our Shipping page.\u003c\/p\u003e\u003ch3\u003eWhat finish does the panel arrive in?\u003c\/h3\u003e\u003cp\u003eIt arrives ready for preparation and paint. Like any replacement body panel, it should be test-fitted, prepared and refinished before final installation.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eBodyBros is an independent manufacturer of replica restoration panels. Vehicle make and model names are used for fitment identification only; BodyBros products are aftermarket parts and BodyBros is not affiliated with or endorsed by Nissan.\u003c\/em\u003e\u003c\/p\u003e\u003cp\u003e\u003cem\u003eExplore more: \u003ca href=\"\/collections\/datsun-240z\"\u003eall Nissan \/ Datsun 240Z panels\u003c\/a\u003e · \u003ca href=\"\/collections\/panels-fenders\"\u003efenders \u0026amp; guards\u003c\/a\u003e · \u003ca href=\"\/blogs\/knowledge\/choosing-reproduction-body-panels\"\u003ehow to choose reproduction panels\u003c\/a\u003e\u003c\/em\u003e\u003c\/p\u003e","brand":"BodyBros","offers":[{"title":"Default Title","offer_id":44126707449921,"sku":"SYC-NS42-05R","price":500.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/1468\/8321\/files\/SYC-NS42-05R_a33b36d1-ce85-412d-94d8-7036bc2e6a98.jpg?v=1783303474"},{"product_id":"datsun-240z-hood","title":"Hood – for Datsun 240Z (Steel)","description":"\u003cp\u003eA direct-fit replica hood for 1969-1973 Nissan \/ Datsun 240Z restorations. Stamped in steel to original-style contours so it lines up with existing seams, gaps and hardware locations — the fastest route from rust bucket to straight body without sacrificing a donor car.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFits\u003c\/th\u003e\n\u003ctd\u003eNissan \/ Datsun 240Z\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eYears\u003c\/th\u003e\n\u003ctd\u003e1969-1973\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePanel type\u003c\/th\u003e\n\u003ctd\u003eHoods \u0026amp; Bonnets\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eSteel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSKU\u003c\/th\u003e\n\u003ctd\u003eSYC-NS42-04\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eSupplied ready for prep and paint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eInstallation\u003c\/th\u003e\n\u003ctd\u003eEasy to Moderate — approx. 1–2 hours with a helper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWelding required\u003c\/th\u003e\n\u003ctd\u003eNo — bolt-on \/ transfer fit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eThis hood fits the \u003cstrong\u003eNissan \/ Datsun 240Z\u003c\/strong\u003e, model years \u003cstrong\u003e1969-1973\u003c\/strong\u003e. Panels listed 1969–1973 fit the 240Z (S30); many pressings carry over to the 260Z with detail changes — compare flange and trim-hole locations if fitting to a later S30. The 240Z is a unibody: structural panels should be welded in at factory seams by a competent welder.\u003c\/p\u003e\u003cp\u003eAs with any reproduction panel, trial-fit against the vehicle before final welding or paint. Minor adjustment at flanges and mounting points is a normal part of professional panel fitting, even with precision replica pressings.\u003c\/p\u003e\u003ch2\u003eThe maths of new steel\u003c\/h2\u003e\u003cp\u003eRestorers rarely regret buying a new panel; they regret the three weekends spent trying to save an old one first. Repairing a corroded hood means paying for blasting, fabrication time and filler — and the result is still fifty-year-old metal. A replica pressing costs a known amount, arrives straight, and spares a donor vehicle from being cut up for parts. Your original panel can stay with the vehicle for provenance; your build gets metal you can trust.\u003c\/p\u003e\u003ch2\u003eAbout the Nissan \/ Datsun 240Z\u003c\/h2\u003e\u003cp\u003eThe Datsun 240Z (Nissan S30, 1969–1973) changed the sports car market: a 2.4-litre overhead-cam six, independent suspension and coupe styling at a price that undercut everything from Europe. It also became one of the most rust-prone classics of its era. Nissan's thin-gauge unibody steel, minimal factory rust-proofing and moisture-trapping box sections mean that nearly every surviving S30 needs structural and cosmetic sheet metal during restoration. With concours 240Z values now well into six figures, correctly stamped reproduction panels have become essential to the market.\u003c\/p\u003e\u003cp\u003eThe S30 rusts everywhere moisture settles: floor pans and frame rails, dogleg and rocker sections, rear quarters and wheel arches, the battery tray and surrounding cowl, front fenders around the headlight buckets, and the hatch slam panel. Because the 240Z is a unibody, replacing corroded panels properly — with correct-profile steel welded at factory seam locations — is a structural repair, not just a cosmetic one.\u003c\/p\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eDifficulty:\u003c\/strong\u003e Easy to Moderate  |  \u003cstrong\u003eTypical time:\u003c\/strong\u003e 1–2 hours with a helper  |  \u003cstrong\u003eWelding required:\u003c\/strong\u003e no.\u003c\/p\u003e\u003cp\u003eHoods are two-person bolt-on jobs. Transfer the latch, safety catch, hinges and any insulation, sit the hood on with the bolts loose, and walk the panel into even alignment against the cowl and fenders before tightening. Adjust the bump stops and latch last so the hood sits flush at the front edge.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTools:\u003c\/strong\u003e basic hand tools, a second pair of hands, masking tape to protect fenders during fitting.\u003cbr\u003e\u003cstrong\u003eCommon mistakes to avoid:\u003c\/strong\u003e fitting alone and creasing the skin, and tightening the hinges before the panel is centred.\u003c\/p\u003e\u003ch2\u003eQuality \u0026amp; Manufacturing\u003c\/h2\u003e\u003cp\u003eBodyBros replica panels are pressed on dedicated tooling developed from measured original panels, in automotive-grade material matched to the application. Pressings are checked against reference bucks for profile, flange geometry and hole placement before packing. Steel panels are supplied with a protective primer coating ready for preparation and refinishing; alloy and plastic parts are supplied ready to prepare and paint. These are aftermarket replica restoration parts — manufactured by BodyBros, not by the original vehicle maker.\u003c\/p\u003e\u003ch2\u003eWorldwide Delivery\u003c\/h2\u003e\u003cp\u003eWe ship worldwide — including the United States, Canada, the UK, Europe, Australia and New Zealand. Panels are packed in purpose-built cartons or timber crates depending on size; large assemblies travel by sea or air freight with tracking. Duties and taxes are calculated at checkout or on arrival depending on destination. See our \u003ca href=\"\/pages\/shipping\"\u003eShipping \u0026amp; Delivery\u003c\/a\u003e page for lead times to your region.\u003c\/p\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003ch3\u003eWill this hood fit my Nissan \/ Datsun 240Z?\u003c\/h3\u003e\u003cp\u003eIt fits 1969-1973 models as listed above. Panels listed 1969–1973 fit the 240Z (S30); many pressings carry over to the 260Z with detail changes — compare flange and trim-hole locations if fitting to a later S30. The 240Z is a unibody: structural panels should be welded in at factory seams by a competent welder.\u003c\/p\u003e\u003ch3\u003eIs welding required to install it?\u003c\/h3\u003e\u003cp\u003eNo. This part installs as a bolt-on or transfer fit using standard hand tools — see the installation notes above.\u003c\/p\u003e\u003ch3\u003eCan it replace a rusted original panel?\u003c\/h3\u003e\u003cp\u003eYes — that is exactly what it is made for. The Nissan \/ Datsun 240Z commonly rusts in floor pans and rails, doglegs and rockers, rear quarters, the battery tray area, front fenders and the hatch surround, and this replica pressing replaces corroded original metal with new steel — no donor vehicle required.\u003c\/p\u003e\u003ch3\u003eDo you ship this internationally?\u003c\/h3\u003e\u003cp\u003eYes. We ship worldwide with tracked freight; larger panels and assemblies travel in purpose-built crates. Delivery times and freight options for your country are shown at checkout and on our Shipping page.\u003c\/p\u003e\u003ch3\u003eWhat finish does the panel arrive in?\u003c\/h3\u003e\u003cp\u003eIt arrives ready for preparation and paint. Like any replacement body panel, it should be test-fitted, prepared and refinished before final installation.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eBodyBros is an independent manufacturer of replica restoration panels. Vehicle make and model names are used for fitment identification only; BodyBros products are aftermarket parts and BodyBros is not affiliated with or endorsed by Nissan.\u003c\/em\u003e\u003c\/p\u003e\u003cp\u003e\u003cem\u003eExplore more: \u003ca href=\"\/collections\/datsun-240z\"\u003eall Nissan \/ Datsun 240Z panels\u003c\/a\u003e · \u003ca href=\"\/collections\/panels-hoods\"\u003ehoods \u0026amp; bonnets\u003c\/a\u003e · \u003ca href=\"\/blogs\/knowledge\/choosing-reproduction-body-panels\"\u003ehow to choose reproduction panels\u003c\/a\u003e\u003c\/em\u003e\u003c\/p\u003e","brand":"BodyBros","offers":[{"title":"Default Title","offer_id":44126707482689,"sku":"SYC-NS42-04","price":616.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/1468\/8321\/files\/SYC-NS42-04_bb5b5164-1ecc-42de-90cd-669dce07c624.jpg?v=1783303475"},{"product_id":"datsun-240z-battery-holder","title":"Battery Holder – for Datsun 240Z (Steel)","description":"\u003cp\u003eSave your restoration hours for the work that shows: this replica battery holder suits 1969-1973 Nissan \/ Datsun 240Z builds and replaces panels that would cost more in repair labour than they are worth. Manufactured in steel to match the original pressing, it fits the way the panel it replaces once did — without the rust, dents or filler.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFits\u003c\/th\u003e\n\u003ctd\u003eNissan \/ Datsun 240Z\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eYears\u003c\/th\u003e\n\u003ctd\u003e1969-1973\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePanel type\u003c\/th\u003e\n\u003ctd\u003eInterior \u0026amp; Specialty Panels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eSteel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSKU\u003c\/th\u003e\n\u003ctd\u003eSYC-NS42-20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eSupplied ready for prep and paint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eInstallation\u003c\/th\u003e\n\u003ctd\u003eEasy to Moderate — approx. 1–3 hours typical\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWelding required\u003c\/th\u003e\n\u003ctd\u003eNo — bolt-on \/ transfer fit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eThis panel fits the \u003cstrong\u003eNissan \/ Datsun 240Z\u003c\/strong\u003e, model years \u003cstrong\u003e1969-1973\u003c\/strong\u003e. Panels listed 1969–1973 fit the 240Z (S30); many pressings carry over to the 260Z with detail changes — compare flange and trim-hole locations if fitting to a later S30. The 240Z is a unibody: structural panels should be welded in at factory seams by a competent welder.\u003c\/p\u003e\u003cp\u003eAs with any reproduction panel, trial-fit against the vehicle before final welding or paint. Minor adjustment at flanges and mounting points is a normal part of professional panel fitting, even with precision replica pressings.\u003c\/p\u003e\u003ch2\u003eSkip the rust bucket rescue\u003c\/h2\u003e\u003cp\u003eThe oldroute to a straight Nissan \/ Datsun 240Z body was buying a second parts vehicle and hoping its panel was better than yours. That gamble costs storage, freight and usually disappointment — donor panels carry the same decades of corrosion in the same places. New replica steel ends the cycle: predictable cost, predictable fit, and every panel of your actual vehicle preserved.\u003c\/p\u003e\u003ch2\u003eAbout the Nissan \/ Datsun 240Z\u003c\/h2\u003e\u003cp\u003eThe Datsun 240Z (Nissan S30, 1969–1973) changed the sports car market: a 2.4-litre overhead-cam six, independent suspension and coupe styling at a price that undercut everything from Europe. It also became one of the most rust-prone classics of its era. Nissan's thin-gauge unibody steel, minimal factory rust-proofing and moisture-trapping box sections mean that nearly every surviving S30 needs structural and cosmetic sheet metal during restoration. With concours 240Z values now well into six figures, correctly stamped reproduction panels have become essential to the market.\u003c\/p\u003e\u003cp\u003eThe S30 rusts everywhere moisture settles: floor pans and frame rails, dogleg and rocker sections, rear quarters and wheel arches, the battery tray and surrounding cowl, front fenders around the headlight buckets, and the hatch slam panel. Because the 240Z is a unibody, replacing corroded panels properly — with correct-profile steel welded at factory seam locations — is a structural repair, not just a cosmetic one.\u003c\/p\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eDifficulty:\u003c\/strong\u003e Easy to Moderate  |  \u003cstrong\u003eTypical time:\u003c\/strong\u003e 1–3 hours typical  |  \u003cstrong\u003eWelding required:\u003c\/strong\u003e no.\u003c\/p\u003e\u003cp\u003eMost specialty panels install with screws or light welding in protected areas, so fit and finish matter more than structure. Trial-fit, transfer captive nuts or clips from the original where used, and prime and paint before final assembly — these panels are visible up close.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTools:\u003c\/strong\u003e basic hand tools, trim tools; welder only where the original was welded.\u003cbr\u003e\u003cstrong\u003eCommon mistakes to avoid:\u003c\/strong\u003e painting after assembly instead of before, and losing the original fasteners before checking the new panel's holes.\u003c\/p\u003e\u003ch2\u003eQuality \u0026amp; Manufacturing\u003c\/h2\u003e\u003cp\u003eBodyBros replica panels are pressed on dedicated tooling developed from measured original panels, in automotive-grade material matched to the application. Pressings are checked against reference bucks for profile, flange geometry and hole placement before packing. Steel panels are supplied with a protective primer coating ready for preparation and refinishing; alloy and plastic parts are supplied ready to prepare and paint. These are aftermarket replica restoration parts — manufactured by BodyBros, not by the original vehicle maker.\u003c\/p\u003e\u003ch2\u003eWorldwide Delivery\u003c\/h2\u003e\u003cp\u003eWe ship worldwide — including the United States, Canada, the UK, Europe, Australia and New Zealand. Panels are packed in purpose-built cartons or timber crates depending on size; large assemblies travel by sea or air freight with tracking. Duties and taxes are calculated at checkout or on arrival depending on destination. See our \u003ca href=\"\/pages\/shipping\"\u003eShipping \u0026amp; Delivery\u003c\/a\u003e page for lead times to your region.\u003c\/p\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003ch3\u003eWill this panel fit my Nissan \/ Datsun 240Z?\u003c\/h3\u003e\u003cp\u003eIt fits 1969-1973 models as listed above. Panels listed 1969–1973 fit the 240Z (S30); many pressings carry over to the 260Z with detail changes — compare flange and trim-hole locations if fitting to a later S30. The 240Z is a unibody: structural panels should be welded in at factory seams by a competent welder.\u003c\/p\u003e\u003ch3\u003eIs welding required to install it?\u003c\/h3\u003e\u003cp\u003eNo. This part installs as a bolt-on or transfer fit using standard hand tools — see the installation notes above.\u003c\/p\u003e\u003ch3\u003eCan it replace a rusted original panel?\u003c\/h3\u003e\u003cp\u003eYes — that is exactly what it is made for. The Nissan \/ Datsun 240Z commonly rusts in floor pans and rails, doglegs and rockers, rear quarters, the battery tray area, front fenders and the hatch surround, and this replica pressing replaces corroded original metal with new steel — no donor vehicle required.\u003c\/p\u003e\u003ch3\u003eDo you ship this internationally?\u003c\/h3\u003e\u003cp\u003eYes. We ship worldwide with tracked freight; larger panels and assemblies travel in purpose-built crates. Delivery times and freight options for your country are shown at checkout and on our Shipping page.\u003c\/p\u003e\u003ch3\u003eWhat finish does the panel arrive in?\u003c\/h3\u003e\u003cp\u003eIt arrives ready for preparation and paint. Like any replacement body panel, it should be test-fitted, prepared and refinished before final installation.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eBodyBros is an independent manufacturer of replica restoration panels. Vehicle make and model names are used for fitment identification only; BodyBros products are aftermarket parts and BodyBros is not affiliated with or endorsed by Nissan.\u003c\/em\u003e\u003c\/p\u003e\u003cp\u003e\u003cem\u003eExplore more: \u003ca href=\"\/collections\/datsun-240z\"\u003eall Nissan \/ Datsun 240Z panels\u003c\/a\u003e · \u003ca href=\"\/collections\/panels-interior-misc\"\u003einterior \u0026amp; specialty panels\u003c\/a\u003e · \u003ca href=\"\/blogs\/knowledge\/choosing-reproduction-body-panels\"\u003ehow to choose reproduction panels\u003c\/a\u003e\u003c\/em\u003e\u003c\/p\u003e","brand":"BodyBros","offers":[{"title":"Default Title","offer_id":44126715281473,"sku":"SYC-NS42-20","price":125.88,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/1468\/8321\/files\/SYC-NS42-20_7f954a8a-1f38-45e5-a45c-958fdbeb8a47.jpg?v=1783303642"},{"product_id":"datsun-240z-rear-bumper","title":"Rear Bumper – for Datsun 240Z (Steel)","description":"\u003cp\u003eSave your restoration hours for the work that shows: this replica rear bumper suits 1969-1973 Nissan \/ Datsun 240Z builds and replaces panels that would cost more in repair labour than they are worth. Manufactured in steel to match the original pressing, it fits the way the panel it replaces once did — without the rust, dents or filler.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFits\u003c\/th\u003e\n\u003ctd\u003eNissan \/ Datsun 240Z\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eYears\u003c\/th\u003e\n\u003ctd\u003e1969-1973\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePanel type\u003c\/th\u003e\n\u003ctd\u003eFront End, Grilles \u0026amp; Bumpers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eSteel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSKU\u003c\/th\u003e\n\u003ctd\u003eSYC-NS42-19\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eSupplied ready for prep and paint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eInstallation\u003c\/th\u003e\n\u003ctd\u003eModerate — approx. 2–5 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWelding required\u003c\/th\u003e\n\u003ctd\u003eNo — bolt-on \/ transfer fit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eThis front-end panel fits the \u003cstrong\u003eNissan \/ Datsun 240Z\u003c\/strong\u003e, model years \u003cstrong\u003e1969-1973\u003c\/strong\u003e. Panels listed 1969–1973 fit the 240Z (S30); many pressings carry over to the 260Z with detail changes — compare flange and trim-hole locations if fitting to a later S30. The 240Z is a unibody: structural panels should be welded in at factory seams by a competent welder.\u003c\/p\u003e\u003cp\u003eAs with any reproduction panel, trial-fit against the vehicle before final welding or paint. Minor adjustment at flanges and mounting points is a normal part of professional panel fitting, even with precision replica pressings.\u003c\/p\u003e\u003ch2\u003eThe maths of new steel\u003c\/h2\u003e\u003cp\u003eRestorers rarely regret buying a new panel; they regret the three weekends spent trying to save an old one first. Repairing a corroded front-end panel means paying for blasting, fabrication time and filler — and the result is still fifty-year-old metal. A replica pressing costs a known amount, arrives straight, and spares a donor vehicle from being cut up for parts. Your original panel can stay with the vehicle for provenance; your build gets metal you can trust.\u003c\/p\u003e\u003ch2\u003eAbout the Nissan \/ Datsun 240Z\u003c\/h2\u003e\u003cp\u003eThe Datsun 240Z (Nissan S30, 1969–1973) changed the sports car market: a 2.4-litre overhead-cam six, independent suspension and coupe styling at a price that undercut everything from Europe. It also became one of the most rust-prone classics of its era. Nissan's thin-gauge unibody steel, minimal factory rust-proofing and moisture-trapping box sections mean that nearly every surviving S30 needs structural and cosmetic sheet metal during restoration. With concours 240Z values now well into six figures, correctly stamped reproduction panels have become essential to the market.\u003c\/p\u003e\u003cp\u003eThe S30 rusts everywhere moisture settles: floor pans and frame rails, dogleg and rocker sections, rear quarters and wheel arches, the battery tray and surrounding cowl, front fenders around the headlight buckets, and the hatch slam panel. Because the 240Z is a unibody, replacing corroded panels properly — with correct-profile steel welded at factory seam locations — is a structural repair, not just a cosmetic one.\u003c\/p\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eDifficulty:\u003c\/strong\u003e Moderate  |  \u003cstrong\u003eTypical time:\u003c\/strong\u003e 2–5 hours  |  \u003cstrong\u003eWelding required:\u003c\/strong\u003e no.\u003c\/p\u003e\u003cp\u003eMost front-end panels bolt through slotted holes that allow real adjustment — use it. Fit loose, hang the hood and fenders, and centre everything before tightening so latch, lights and gaps all land together. On welded radiator supports, measure diagonals against the chassis datum before welding.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTools:\u003c\/strong\u003e basic hand tools, alignment measure, thread lubricant; welder only for welded supports.\u003cbr\u003e\u003cstrong\u003eCommon mistakes to avoid:\u003c\/strong\u003e tightening before the hood latch is aligned, and ignoring bent mounting brackets from old impacts.\u003c\/p\u003e\u003ch2\u003eQuality \u0026amp; Manufacturing\u003c\/h2\u003e\u003cp\u003eBodyBros replica panels are pressed on dedicated tooling developed from measured original panels, in automotive-grade material matched to the application. Pressings are checked against reference bucks for profile, flange geometry and hole placement before packing. Steel panels are supplied with a protective primer coating ready for preparation and refinishing; alloy and plastic parts are supplied ready to prepare and paint. These are aftermarket replica restoration parts — manufactured by BodyBros, not by the original vehicle maker.\u003c\/p\u003e\u003ch2\u003eWorldwide Delivery\u003c\/h2\u003e\u003cp\u003eWe ship worldwide — including the United States, Canada, the UK, Europe, Australia and New Zealand. Panels are packed in purpose-built cartons or timber crates depending on size; large assemblies travel by sea or air freight with tracking. Duties and taxes are calculated at checkout or on arrival depending on destination. See our \u003ca href=\"\/pages\/shipping\"\u003eShipping \u0026amp; Delivery\u003c\/a\u003e page for lead times to your region.\u003c\/p\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003ch3\u003eWill this front-end panel fit my Nissan \/ Datsun 240Z?\u003c\/h3\u003e\u003cp\u003eIt fits 1969-1973 models as listed above. Panels listed 1969–1973 fit the 240Z (S30); many pressings carry over to the 260Z with detail changes — compare flange and trim-hole locations if fitting to a later S30. The 240Z is a unibody: structural panels should be welded in at factory seams by a competent welder.\u003c\/p\u003e\u003ch3\u003eIs welding required to install it?\u003c\/h3\u003e\u003cp\u003eNo. This part installs as a bolt-on or transfer fit using standard hand tools — see the installation notes above.\u003c\/p\u003e\u003ch3\u003eCan it replace a rusted original panel?\u003c\/h3\u003e\u003cp\u003eYes — that is exactly what it is made for. The Nissan \/ Datsun 240Z commonly rusts in floor pans and rails, doglegs and rockers, rear quarters, the battery tray area, front fenders and the hatch surround, and this replica pressing replaces corroded original metal with new steel — no donor vehicle required.\u003c\/p\u003e\u003ch3\u003eDo you ship this internationally?\u003c\/h3\u003e\u003cp\u003eYes. We ship worldwide with tracked freight; larger panels and assemblies travel in purpose-built crates. Delivery times and freight options for your country are shown at checkout and on our Shipping page.\u003c\/p\u003e\u003ch3\u003eWhat finish does the panel arrive in?\u003c\/h3\u003e\u003cp\u003eIt arrives ready for preparation and paint. Like any replacement body panel, it should be test-fitted, prepared and refinished before final installation.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eBodyBros is an independent manufacturer of replica restoration panels. Vehicle make and model names are used for fitment identification only; BodyBros products are aftermarket parts and BodyBros is not affiliated with or endorsed by Nissan.\u003c\/em\u003e\u003c\/p\u003e\u003cp\u003e\u003cem\u003eExplore more: \u003ca href=\"\/collections\/datsun-240z\"\u003eall Nissan \/ Datsun 240Z panels\u003c\/a\u003e · \u003ca href=\"\/collections\/panels-front-end\"\u003efront end, grilles \u0026amp; bumpers\u003c\/a\u003e · \u003ca href=\"\/blogs\/knowledge\/choosing-reproduction-body-panels\"\u003ehow to choose reproduction panels\u003c\/a\u003e\u003c\/em\u003e\u003c\/p\u003e","brand":"BodyBros","offers":[{"title":"Default Title","offer_id":44126716395585,"sku":"SYC-NS42-19","price":530.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/1468\/8321\/files\/SYC-NS42-19_2edd0db5-717c-4a5a-9ed7-7aea57dea354.jpg?v=1783303662"},{"product_id":"datsun-240z-tail-panel","title":"Tail Panel – for Datsun 240Z (Steel)","description":"\u003cp\u003eSave your restoration hours for the work that shows: this replica tail panel suits 1969-1973 Nissan \/ Datsun 240Z builds and replaces panels that would cost more in repair labour than they are worth. Manufactured in steel to match the original pressing, it fits the way the panel it replaces once did — without the rust, dents or filler.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFits\u003c\/th\u003e\n\u003ctd\u003eNissan \/ Datsun 240Z\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eYears\u003c\/th\u003e\n\u003ctd\u003e1969-1973\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePanel type\u003c\/th\u003e\n\u003ctd\u003eBack \u0026amp; Tail Panels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eSteel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSKU\u003c\/th\u003e\n\u003ctd\u003eSYC-NS42-07\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eSupplied ready for prep and paint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eInstallation\u003c\/th\u003e\n\u003ctd\u003eModerate to Advanced — approx. 3–6 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWelding required\u003c\/th\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eThis back panel fits the \u003cstrong\u003eNissan \/ Datsun 240Z\u003c\/strong\u003e, model years \u003cstrong\u003e1969-1973\u003c\/strong\u003e. Panels listed 1969–1973 fit the 240Z (S30); many pressings carry over to the 260Z with detail changes — compare flange and trim-hole locations if fitting to a later S30. The 240Z is a unibody: structural panels should be welded in at factory seams by a competent welder.\u003c\/p\u003e\u003cp\u003eAs with any reproduction panel, trial-fit against the vehicle before final welding or paint. Minor adjustment at flanges and mounting points is a normal part of professional panel fitting, even with precision replica pressings.\u003c\/p\u003e\u003ch2\u003eWhy replace instead of repair\u003c\/h2\u003e\u003cp\u003eEvery hour spent cutting corrosion out of an original panel is an hour not spent finishing the vehicle — and rust repair is the most open-ended line in any restoration budget. A new replica back panel gives you a fixed cost, a known timeline and straight steel from day one. No hunting classifieds for a donor 240Z, no cutting up a survivor for one usable panel, no discovering that the ‘solid’ second-hand panel you shipped across the country rusted the same way yours did.\u003c\/p\u003e\u003ch2\u003eAbout the Nissan \/ Datsun 240Z\u003c\/h2\u003e\u003cp\u003eThe Datsun 240Z (Nissan S30, 1969–1973) changed the sports car market: a 2.4-litre overhead-cam six, independent suspension and coupe styling at a price that undercut everything from Europe. It also became one of the most rust-prone classics of its era. Nissan's thin-gauge unibody steel, minimal factory rust-proofing and moisture-trapping box sections mean that nearly every surviving S30 needs structural and cosmetic sheet metal during restoration. With concours 240Z values now well into six figures, correctly stamped reproduction panels have become essential to the market.\u003c\/p\u003e\u003cp\u003eThe S30 rusts everywhere moisture settles: floor pans and frame rails, dogleg and rocker sections, rear quarters and wheel arches, the battery tray and surrounding cowl, front fenders around the headlight buckets, and the hatch slam panel. Because the 240Z is a unibody, replacing corroded panels properly — with correct-profile steel welded at factory seam locations — is a structural repair, not just a cosmetic one.\u003c\/p\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eDifficulty:\u003c\/strong\u003e Moderate to Advanced  |  \u003cstrong\u003eTypical time:\u003c\/strong\u003e 3–6 hours  |  \u003cstrong\u003eWelding required:\u003c\/strong\u003e yes.\u003c\/p\u003e\u003cp\u003eFit back panels with the tailgate or rear door present so the opening is gapped to something real. Drill the old spot welds, clean the flanges, clamp, check the opening, and plug-weld at factory spacing. Seal the floor joint on both sides — that's the seam that killed the original.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTools:\u003c\/strong\u003e spot-weld drill, MIG welder, clamps, seam sealer.\u003cbr\u003e\u003cstrong\u003eCommon mistakes to avoid:\u003c\/strong\u003e welding the opening without the closure panel to gap against, and leaving the floor seam unsealed.\u003c\/p\u003e\u003cp\u003eIf you are not an experienced welder, we recommend professional installation for this panel — it is structural, and correct seam welding matters for both safety and finish.\u003c\/p\u003e\u003ch2\u003eQuality \u0026amp; Manufacturing\u003c\/h2\u003e\u003cp\u003eBodyBros replica panels are pressed on dedicated tooling developed from measured original panels, in automotive-grade material matched to the application. Pressings are checked against reference bucks for profile, flange geometry and hole placement before packing. Steel panels are supplied with a protective primer coating ready for preparation and refinishing; alloy and plastic parts are supplied ready to prepare and paint. These are aftermarket replica restoration parts — manufactured by BodyBros, not by the original vehicle maker.\u003c\/p\u003e\u003ch2\u003eWorldwide Delivery\u003c\/h2\u003e\u003cp\u003eWe ship worldwide — including the United States, Canada, the UK, Europe, Australia and New Zealand. Panels are packed in purpose-built cartons or timber crates depending on size; large assemblies travel by sea or air freight with tracking. Duties and taxes are calculated at checkout or on arrival depending on destination. See our \u003ca href=\"\/pages\/shipping\"\u003eShipping \u0026amp; Delivery\u003c\/a\u003e page for lead times to your region.\u003c\/p\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003ch3\u003eWill this back panel fit my Nissan \/ Datsun 240Z?\u003c\/h3\u003e\u003cp\u003eIt fits 1969-1973 models as listed above. Panels listed 1969–1973 fit the 240Z (S30); many pressings carry over to the 260Z with detail changes — compare flange and trim-hole locations if fitting to a later S30. The 240Z is a unibody: structural panels should be welded in at factory seams by a competent welder.\u003c\/p\u003e\u003ch3\u003eIs welding required to install it?\u003c\/h3\u003e\u003cp\u003eYes — this is a welded structural panel. It should be trial-fitted, clamped and plug-welded at the factory seam locations, ideally by an experienced welder.\u003c\/p\u003e\u003ch3\u003eCan it replace a rusted original panel?\u003c\/h3\u003e\u003cp\u003eYes — that is exactly what it is made for. The Nissan \/ Datsun 240Z commonly rusts in floor pans and rails, doglegs and rockers, rear quarters, the battery tray area, front fenders and the hatch surround, and this replica pressing replaces corroded original metal with new steel — no donor vehicle required.\u003c\/p\u003e\u003ch3\u003eDo you ship this internationally?\u003c\/h3\u003e\u003cp\u003eYes. We ship worldwide with tracked freight; larger panels and assemblies travel in purpose-built crates. Delivery times and freight options for your country are shown at checkout and on our Shipping page.\u003c\/p\u003e\u003ch3\u003eWhat finish does the panel arrive in?\u003c\/h3\u003e\u003cp\u003eIt arrives ready for preparation and paint. Like any replacement body panel, it should be test-fitted, prepared and refinished before final installation.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eBodyBros is an independent manufacturer of replica restoration panels. Vehicle make and model names are used for fitment identification only; BodyBros products are aftermarket parts and BodyBros is not affiliated with or endorsed by Nissan.\u003c\/em\u003e\u003c\/p\u003e\u003cp\u003e\u003cem\u003eExplore more: \u003ca href=\"\/collections\/datsun-240z\"\u003eall Nissan \/ Datsun 240Z panels\u003c\/a\u003e · \u003ca href=\"\/collections\/panels-back-panels\"\u003eback \u0026amp; tail panels\u003c\/a\u003e · \u003ca href=\"\/blogs\/knowledge\/choosing-reproduction-body-panels\"\u003ehow to choose reproduction panels\u003c\/a\u003e\u003c\/em\u003e\u003c\/p\u003e","brand":"BodyBros","offers":[{"title":"Default Title","offer_id":44126717083713,"sku":"SYC-NS42-07","price":450.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/1468\/8321\/files\/SYC-NS42-07_c7cc74ac-1de9-4cc6-bcb0-c933d7524fd8.jpg?v=1783303678"},{"product_id":"datsun-240z-tailgate","title":"Tailgate – for Datsun 240Z (Steel)","description":"\u003cp\u003eThis tailgate is a precision replica tailgate made to suit the Nissan \/ Datsun 240Z (1969-1973), pressed in steel to the original-style profile. Instead of spending weekends cutting rust out of fifty-year-old steel — or hunting down a donor vehicle for one usable panel — you start with straight, new metal that is ready for preparation and paint.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFits\u003c\/th\u003e\n\u003ctd\u003eNissan \/ Datsun 240Z\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eYears\u003c\/th\u003e\n\u003ctd\u003e1969-1973\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePanel type\u003c\/th\u003e\n\u003ctd\u003eTailgates \u0026amp; Rear Doors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eSteel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSKU\u003c\/th\u003e\n\u003ctd\u003eSYC-NS42-03\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eSupplied ready for prep and paint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eInstallation\u003c\/th\u003e\n\u003ctd\u003eEasy to Moderate — approx. 1–3 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWelding required\u003c\/th\u003e\n\u003ctd\u003eNo — bolt-on \/ transfer fit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eThis tailgate fits the \u003cstrong\u003eNissan \/ Datsun 240Z\u003c\/strong\u003e, model years \u003cstrong\u003e1969-1973\u003c\/strong\u003e. Panels listed 1969–1973 fit the 240Z (S30); many pressings carry over to the 260Z with detail changes — compare flange and trim-hole locations if fitting to a later S30. The 240Z is a unibody: structural panels should be welded in at factory seams by a competent welder.\u003c\/p\u003e\u003cp\u003eAs with any reproduction panel, trial-fit against the vehicle before final welding or paint. Minor adjustment at flanges and mounting points is a normal part of professional panel fitting, even with precision replica pressings.\u003c\/p\u003e\u003ch2\u003eSkip the rust bucket rescue\u003c\/h2\u003e\u003cp\u003eThe oldroute to a straight Nissan \/ Datsun 240Z body was buying a second parts vehicle and hoping its tailgate was better than yours. That gamble costs storage, freight and usually disappointment — donor panels carry the same decades of corrosion in the same places. New replica steel ends the cycle: predictable cost, predictable fit, and every panel of your actual vehicle preserved.\u003c\/p\u003e\u003ch2\u003eAbout the Nissan \/ Datsun 240Z\u003c\/h2\u003e\u003cp\u003eThe Datsun 240Z (Nissan S30, 1969–1973) changed the sports car market: a 2.4-litre overhead-cam six, independent suspension and coupe styling at a price that undercut everything from Europe. It also became one of the most rust-prone classics of its era. Nissan's thin-gauge unibody steel, minimal factory rust-proofing and moisture-trapping box sections mean that nearly every surviving S30 needs structural and cosmetic sheet metal during restoration. With concours 240Z values now well into six figures, correctly stamped reproduction panels have become essential to the market.\u003c\/p\u003e\u003cp\u003eThe S30 rusts everywhere moisture settles: floor pans and frame rails, dogleg and rocker sections, rear quarters and wheel arches, the battery tray and surrounding cowl, front fenders around the headlight buckets, and the hatch slam panel. Because the 240Z is a unibody, replacing corroded panels properly — with correct-profile steel welded at factory seam locations — is a structural repair, not just a cosmetic one.\u003c\/p\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eDifficulty:\u003c\/strong\u003e Easy to Moderate  |  \u003cstrong\u003eTypical time:\u003c\/strong\u003e 1–3 hours  |  \u003cstrong\u003eWelding required:\u003c\/strong\u003e no.\u003c\/p\u003e\u003cp\u003eTailgates bolt to their hinges, so replacement is mostly transfer work: swap chains or stays, latches, handles and any glass hardware to the new panel, then adjust for even margins against the rear opening. Seal the internal seams before paint so the new panel doesn't repeat the original's fate.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTools:\u003c\/strong\u003e basic hand tools, trim tools, thread lubricant for aged hinge bolts.\u003cbr\u003e\u003cstrong\u003eCommon mistakes to avoid:\u003c\/strong\u003e skipping internal cavity wax, and not checking the rear body opening for rust and distortion before blaming the new panel for poor gaps.\u003c\/p\u003e\u003ch2\u003eQuality \u0026amp; Manufacturing\u003c\/h2\u003e\u003cp\u003eBodyBros replica panels are pressed on dedicated tooling developed from measured original panels, in automotive-grade material matched to the application. Pressings are checked against reference bucks for profile, flange geometry and hole placement before packing. Steel panels are supplied with a protective primer coating ready for preparation and refinishing; alloy and plastic parts are supplied ready to prepare and paint. These are aftermarket replica restoration parts — manufactured by BodyBros, not by the original vehicle maker.\u003c\/p\u003e\u003ch2\u003eWorldwide Delivery\u003c\/h2\u003e\u003cp\u003eWe ship worldwide — including the United States, Canada, the UK, Europe, Australia and New Zealand. Panels are packed in purpose-built cartons or timber crates depending on size; large assemblies travel by sea or air freight with tracking. Duties and taxes are calculated at checkout or on arrival depending on destination. See our \u003ca href=\"\/pages\/shipping\"\u003eShipping \u0026amp; Delivery\u003c\/a\u003e page for lead times to your region.\u003c\/p\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003ch3\u003eWill this tailgate fit my Nissan \/ Datsun 240Z?\u003c\/h3\u003e\u003cp\u003eIt fits 1969-1973 models as listed above. Panels listed 1969–1973 fit the 240Z (S30); many pressings carry over to the 260Z with detail changes — compare flange and trim-hole locations if fitting to a later S30. The 240Z is a unibody: structural panels should be welded in at factory seams by a competent welder.\u003c\/p\u003e\u003ch3\u003eIs welding required to install it?\u003c\/h3\u003e\u003cp\u003eNo. This part installs as a bolt-on or transfer fit using standard hand tools — see the installation notes above.\u003c\/p\u003e\u003ch3\u003eCan it replace a rusted original panel?\u003c\/h3\u003e\u003cp\u003eYes — that is exactly what it is made for. The Nissan \/ Datsun 240Z commonly rusts in floor pans and rails, doglegs and rockers, rear quarters, the battery tray area, front fenders and the hatch surround, and this replica pressing replaces corroded original metal with new steel — no donor vehicle required.\u003c\/p\u003e\u003ch3\u003eDo you ship this internationally?\u003c\/h3\u003e\u003cp\u003eYes. We ship worldwide with tracked freight; larger panels and assemblies travel in purpose-built crates. Delivery times and freight options for your country are shown at checkout and on our Shipping page.\u003c\/p\u003e\u003ch3\u003eWhat finish does the panel arrive in?\u003c\/h3\u003e\u003cp\u003eIt arrives ready for preparation and paint. Like any replacement body panel, it should be test-fitted, prepared and refinished before final installation.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eBodyBros is an independent manufacturer of replica restoration panels. Vehicle make and model names are used for fitment identification only; BodyBros products are aftermarket parts and BodyBros is not affiliated with or endorsed by Nissan.\u003c\/em\u003e\u003c\/p\u003e\u003cp\u003e\u003cem\u003eExplore more: \u003ca href=\"\/collections\/datsun-240z\"\u003eall Nissan \/ Datsun 240Z panels\u003c\/a\u003e · \u003ca href=\"\/collections\/panels-tailgates\"\u003etailgates \u0026amp; rear doors\u003c\/a\u003e · \u003ca href=\"\/blogs\/knowledge\/choosing-reproduction-body-panels\"\u003ehow to choose reproduction panels\u003c\/a\u003e\u003c\/em\u003e\u003c\/p\u003e","brand":"BodyBros","offers":[{"title":"Default Title","offer_id":44126717116481,"sku":"SYC-NS42-03","price":550.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/1468\/8321\/files\/240Z_5be37472-0707-4f75-a8cb-de78c0776427.jpg?v=1783303679"},{"product_id":"datsun-240z-taillight-outer-panel-lh","title":"Taillight Outer Panel, LH – for Datsun 240Z (Steel)","description":"\u003cp\u003eThis taillight outer panel is a precision replica panel made to suit the Nissan \/ Datsun 240Z (1969-1973), pressed in steel to the original-style profile for the left-hand (LH) side. Instead of spending weekends cutting rust out of fifty-year-old steel — or hunting down a donor vehicle for one usable panel — you start with straight, new metal that is ready for preparation and paint.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFits\u003c\/th\u003e\n\u003ctd\u003eNissan \/ Datsun 240Z\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eYears\u003c\/th\u003e\n\u003ctd\u003e1969-1973\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePanel type\u003c\/th\u003e\n\u003ctd\u003eInterior \u0026amp; Specialty Panels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eSteel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSide\u003c\/th\u003e\n\u003ctd\u003eLE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSKU\u003c\/th\u003e\n\u003ctd\u003eSYC-NS42-16L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eSupplied ready for prep and paint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eInstallation\u003c\/th\u003e\n\u003ctd\u003eEasy to Moderate — approx. 1–3 hours typical\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWelding required\u003c\/th\u003e\n\u003ctd\u003eNo — bolt-on \/ transfer fit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eThis panel fits the \u003cstrong\u003eNissan \/ Datsun 240Z\u003c\/strong\u003e, model years \u003cstrong\u003e1969-1973\u003c\/strong\u003e. Panels listed 1969–1973 fit the 240Z (S30); many pressings carry over to the 260Z with detail changes — compare flange and trim-hole locations if fitting to a later S30. The 240Z is a unibody: structural panels should be welded in at factory seams by a competent welder.\u003c\/p\u003e\u003cp\u003eAs with any reproduction panel, trial-fit against the vehicle before final welding or paint. Minor adjustment at flanges and mounting points is a normal part of professional panel fitting, even with precision replica pressings.\u003c\/p\u003e\u003ch2\u003eSkip the rust bucket rescue\u003c\/h2\u003e\u003cp\u003eThe oldroute to a straight Nissan \/ Datsun 240Z body was buying a second parts vehicle and hoping its panel was better than yours. That gamble costs storage, freight and usually disappointment — donor panels carry the same decades of corrosion in the same places. New replica steel ends the cycle: predictable cost, predictable fit, and every panel of your actual vehicle preserved.\u003c\/p\u003e\u003ch2\u003eAbout the Nissan \/ Datsun 240Z\u003c\/h2\u003e\u003cp\u003eThe Datsun 240Z (Nissan S30, 1969–1973) changed the sports car market: a 2.4-litre overhead-cam six, independent suspension and coupe styling at a price that undercut everything from Europe. It also became one of the most rust-prone classics of its era. Nissan's thin-gauge unibody steel, minimal factory rust-proofing and moisture-trapping box sections mean that nearly every surviving S30 needs structural and cosmetic sheet metal during restoration. With concours 240Z values now well into six figures, correctly stamped reproduction panels have become essential to the market.\u003c\/p\u003e\u003cp\u003eThe S30 rusts everywhere moisture settles: floor pans and frame rails, dogleg and rocker sections, rear quarters and wheel arches, the battery tray and surrounding cowl, front fenders around the headlight buckets, and the hatch slam panel. Because the 240Z is a unibody, replacing corroded panels properly — with correct-profile steel welded at factory seam locations — is a structural repair, not just a cosmetic one.\u003c\/p\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eDifficulty:\u003c\/strong\u003e Easy to Moderate  |  \u003cstrong\u003eTypical time:\u003c\/strong\u003e 1–3 hours typical  |  \u003cstrong\u003eWelding required:\u003c\/strong\u003e no.\u003c\/p\u003e\u003cp\u003eMost specialty panels install with screws or light welding in protected areas, so fit and finish matter more than structure. Trial-fit, transfer captive nuts or clips from the original where used, and prime and paint before final assembly — these panels are visible up close.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTools:\u003c\/strong\u003e basic hand tools, trim tools; welder only where the original was welded.\u003cbr\u003e\u003cstrong\u003eCommon mistakes to avoid:\u003c\/strong\u003e painting after assembly instead of before, and losing the original fasteners before checking the new panel's holes.\u003c\/p\u003e\u003ch2\u003eQuality \u0026amp; Manufacturing\u003c\/h2\u003e\u003cp\u003eBodyBros replica panels are pressed on dedicated tooling developed from measured original panels, in automotive-grade material matched to the application. Pressings are checked against reference bucks for profile, flange geometry and hole placement before packing. Steel panels are supplied with a protective primer coating ready for preparation and refinishing; alloy and plastic parts are supplied ready to prepare and paint. These are aftermarket replica restoration parts — manufactured by BodyBros, not by the original vehicle maker.\u003c\/p\u003e\u003ch2\u003eWorldwide Delivery\u003c\/h2\u003e\u003cp\u003eWe ship worldwide — including the United States, Canada, the UK, Europe, Australia and New Zealand. Panels are packed in purpose-built cartons or timber crates depending on size; large assemblies travel by sea or air freight with tracking. Duties and taxes are calculated at checkout or on arrival depending on destination. See our \u003ca href=\"\/pages\/shipping\"\u003eShipping \u0026amp; Delivery\u003c\/a\u003e page for lead times to your region.\u003c\/p\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003ch3\u003eWill this panel fit my Nissan \/ Datsun 240Z?\u003c\/h3\u003e\u003cp\u003eIt fits 1969-1973 models as listed above. Panels listed 1969–1973 fit the 240Z (S30); many pressings carry over to the 260Z with detail changes — compare flange and trim-hole locations if fitting to a later S30. The 240Z is a unibody: structural panels should be welded in at factory seams by a competent welder.\u003c\/p\u003e\u003ch3\u003eIs welding required to install it?\u003c\/h3\u003e\u003cp\u003eNo. This part installs as a bolt-on or transfer fit using standard hand tools — see the installation notes above.\u003c\/p\u003e\u003ch3\u003eCan it replace a rusted original panel?\u003c\/h3\u003e\u003cp\u003eYes — that is exactly what it is made for. The Nissan \/ Datsun 240Z commonly rusts in floor pans and rails, doglegs and rockers, rear quarters, the battery tray area, front fenders and the hatch surround, and this replica pressing replaces corroded original metal with new steel — no donor vehicle required.\u003c\/p\u003e\u003ch3\u003eDo you ship this internationally?\u003c\/h3\u003e\u003cp\u003eYes. We ship worldwide with tracked freight; larger panels and assemblies travel in purpose-built crates. Delivery times and freight options for your country are shown at checkout and on our Shipping page.\u003c\/p\u003e\u003ch3\u003eWhat finish does the panel arrive in?\u003c\/h3\u003e\u003cp\u003eIt arrives ready for preparation and paint. Like any replacement body panel, it should be test-fitted, prepared and refinished before final installation.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eBodyBros is an independent manufacturer of replica restoration panels. Vehicle make and model names are used for fitment identification only; BodyBros products are aftermarket parts and BodyBros is not affiliated with or endorsed by Nissan.\u003c\/em\u003e\u003c\/p\u003e\u003cp\u003e\u003cem\u003eExplore more: \u003ca href=\"\/collections\/datsun-240z\"\u003eall Nissan \/ Datsun 240Z panels\u003c\/a\u003e · \u003ca href=\"\/collections\/panels-interior-misc\"\u003einterior \u0026amp; specialty panels\u003c\/a\u003e · \u003ca href=\"\/blogs\/knowledge\/choosing-reproduction-body-panels\"\u003ehow to choose reproduction panels\u003c\/a\u003e\u003c\/em\u003e\u003c\/p\u003e","brand":"BodyBros","offers":[{"title":"Default Title","offer_id":44126717214785,"sku":"SYC-NS42-16L","price":150.56,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/1468\/8321\/files\/SYC-NS42-16L_acb86748-81af-4bf3-a465-db63d16f085a.jpg?v=1783303681"},{"product_id":"datsun-240z-taillight-outer-panel-rh","title":"Taillight Outer Panel, RH – for Datsun 240Z (Steel)","description":"\u003cp\u003eSave your restoration hours for the work that shows: this replica taillight outer panel suits 1969-1973 Nissan \/ Datsun 240Z builds, right-hand (RH) side and replaces panels that would cost more in repair labour than they are worth. Manufactured in steel to match the original pressing, it fits the way the panel it replaces once did — without the rust, dents or filler.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFits\u003c\/th\u003e\n\u003ctd\u003eNissan \/ Datsun 240Z\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eYears\u003c\/th\u003e\n\u003ctd\u003e1969-1973\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePanel type\u003c\/th\u003e\n\u003ctd\u003eInterior \u0026amp; Specialty Panels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eSteel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSide\u003c\/th\u003e\n\u003ctd\u003eRI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSKU\u003c\/th\u003e\n\u003ctd\u003eSYC-NS42-16R\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eSupplied ready for prep and paint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eInstallation\u003c\/th\u003e\n\u003ctd\u003eEasy to Moderate — approx. 1–3 hours typical\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWelding required\u003c\/th\u003e\n\u003ctd\u003eNo — bolt-on \/ transfer fit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eThis panel fits the \u003cstrong\u003eNissan \/ Datsun 240Z\u003c\/strong\u003e, model years \u003cstrong\u003e1969-1973\u003c\/strong\u003e. Panels listed 1969–1973 fit the 240Z (S30); many pressings carry over to the 260Z with detail changes — compare flange and trim-hole locations if fitting to a later S30. The 240Z is a unibody: structural panels should be welded in at factory seams by a competent welder.\u003c\/p\u003e\u003cp\u003eAs with any reproduction panel, trial-fit against the vehicle before final welding or paint. Minor adjustment at flanges and mounting points is a normal part of professional panel fitting, even with precision replica pressings.\u003c\/p\u003e\u003ch2\u003eWhy replace instead of repair\u003c\/h2\u003e\u003cp\u003eEvery hour spent cutting corrosion out of an original panel is an hour not spent finishing the vehicle — and rust repair is the most open-ended line in any restoration budget. A new replica panel gives you a fixed cost, a known timeline and straight steel from day one. No hunting classifieds for a donor 240Z, no cutting up a survivor for one usable panel, no discovering that the ‘solid’ second-hand panel you shipped across the country rusted the same way yours did.\u003c\/p\u003e\u003ch2\u003eAbout the Nissan \/ Datsun 240Z\u003c\/h2\u003e\u003cp\u003eThe Datsun 240Z (Nissan S30, 1969–1973) changed the sports car market: a 2.4-litre overhead-cam six, independent suspension and coupe styling at a price that undercut everything from Europe. It also became one of the most rust-prone classics of its era. Nissan's thin-gauge unibody steel, minimal factory rust-proofing and moisture-trapping box sections mean that nearly every surviving S30 needs structural and cosmetic sheet metal during restoration. With concours 240Z values now well into six figures, correctly stamped reproduction panels have become essential to the market.\u003c\/p\u003e\u003cp\u003eThe S30 rusts everywhere moisture settles: floor pans and frame rails, dogleg and rocker sections, rear quarters and wheel arches, the battery tray and surrounding cowl, front fenders around the headlight buckets, and the hatch slam panel. Because the 240Z is a unibody, replacing corroded panels properly — with correct-profile steel welded at factory seam locations — is a structural repair, not just a cosmetic one.\u003c\/p\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eDifficulty:\u003c\/strong\u003e Easy to Moderate  |  \u003cstrong\u003eTypical time:\u003c\/strong\u003e 1–3 hours typical  |  \u003cstrong\u003eWelding required:\u003c\/strong\u003e no.\u003c\/p\u003e\u003cp\u003eMost specialty panels install with screws or light welding in protected areas, so fit and finish matter more than structure. Trial-fit, transfer captive nuts or clips from the original where used, and prime and paint before final assembly — these panels are visible up close.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTools:\u003c\/strong\u003e basic hand tools, trim tools; welder only where the original was welded.\u003cbr\u003e\u003cstrong\u003eCommon mistakes to avoid:\u003c\/strong\u003e painting after assembly instead of before, and losing the original fasteners before checking the new panel's holes.\u003c\/p\u003e\u003ch2\u003eQuality \u0026amp; Manufacturing\u003c\/h2\u003e\u003cp\u003eBodyBros replica panels are pressed on dedicated tooling developed from measured original panels, in automotive-grade material matched to the application. Pressings are checked against reference bucks for profile, flange geometry and hole placement before packing. Steel panels are supplied with a protective primer coating ready for preparation and refinishing; alloy and plastic parts are supplied ready to prepare and paint. These are aftermarket replica restoration parts — manufactured by BodyBros, not by the original vehicle maker.\u003c\/p\u003e\u003ch2\u003eWorldwide Delivery\u003c\/h2\u003e\u003cp\u003eWe ship worldwide — including the United States, Canada, the UK, Europe, Australia and New Zealand. Panels are packed in purpose-built cartons or timber crates depending on size; large assemblies travel by sea or air freight with tracking. Duties and taxes are calculated at checkout or on arrival depending on destination. See our \u003ca href=\"\/pages\/shipping\"\u003eShipping \u0026amp; Delivery\u003c\/a\u003e page for lead times to your region.\u003c\/p\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003ch3\u003eWill this panel fit my Nissan \/ Datsun 240Z?\u003c\/h3\u003e\u003cp\u003eIt fits 1969-1973 models as listed above. Panels listed 1969–1973 fit the 240Z (S30); many pressings carry over to the 260Z with detail changes — compare flange and trim-hole locations if fitting to a later S30. The 240Z is a unibody: structural panels should be welded in at factory seams by a competent welder.\u003c\/p\u003e\u003ch3\u003eIs welding required to install it?\u003c\/h3\u003e\u003cp\u003eNo. This part installs as a bolt-on or transfer fit using standard hand tools — see the installation notes above.\u003c\/p\u003e\u003ch3\u003eCan it replace a rusted original panel?\u003c\/h3\u003e\u003cp\u003eYes — that is exactly what it is made for. The Nissan \/ Datsun 240Z commonly rusts in floor pans and rails, doglegs and rockers, rear quarters, the battery tray area, front fenders and the hatch surround, and this replica pressing replaces corroded original metal with new steel — no donor vehicle required.\u003c\/p\u003e\u003ch3\u003eDo you ship this internationally?\u003c\/h3\u003e\u003cp\u003eYes. We ship worldwide with tracked freight; larger panels and assemblies travel in purpose-built crates. Delivery times and freight options for your country are shown at checkout and on our Shipping page.\u003c\/p\u003e\u003ch3\u003eWhat finish does the panel arrive in?\u003c\/h3\u003e\u003cp\u003eIt arrives ready for preparation and paint. Like any replacement body panel, it should be test-fitted, prepared and refinished before final installation.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eBodyBros is an independent manufacturer of replica restoration panels. Vehicle make and model names are used for fitment identification only; BodyBros products are aftermarket parts and BodyBros is not affiliated with or endorsed by Nissan.\u003c\/em\u003e\u003c\/p\u003e\u003cp\u003e\u003cem\u003eExplore more: \u003ca href=\"\/collections\/datsun-240z\"\u003eall Nissan \/ Datsun 240Z panels\u003c\/a\u003e · \u003ca href=\"\/collections\/panels-interior-misc\"\u003einterior \u0026amp; specialty panels\u003c\/a\u003e · \u003ca href=\"\/blogs\/knowledge\/choosing-reproduction-body-panels\"\u003ehow to choose reproduction panels\u003c\/a\u003e\u003c\/em\u003e\u003c\/p\u003e","brand":"BodyBros","offers":[{"title":"Default Title","offer_id":44126717247553,"sku":"SYC-NS42-16R","price":150.56,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/1468\/8321\/files\/SYC-NS42-16R_f497196a-275f-426e-b7a4-c54c057d1665.jpg?v=1783303682"},{"product_id":"datsun-240z-complete-cab-in-primer-lhd","title":"Replica Complete Cab in Primer LHD – for Datsun 240Z (Steel)","description":"\u003cp\u003eThis complete cab in primer is a precision replica body assembly made to suit the Nissan \/ Datsun 240Z (1969–1973), pressed in steel to the original-style profile. Instead of spending weekends cutting rust out of fifty-year-old steel — or hunting down a donor vehicle for one usable panel — you start with straight, new metal that is ready for preparation and paint. This panel suits \u003cstrong\u003eLHD\u003c\/strong\u003e (​left-hand-drive) vehicles.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMade to order:\u003c\/strong\u003e this replica body structure is built to order. The price shown is indicative — we confirm a final quote, including crated sea freight to your destination, before any order is finalised. \u003ca href=\"\/pages\/contact\"\u003eRequest your quote\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFits\u003c\/th\u003e\n\u003ctd\u003eNissan \/ Datsun 240Z\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eYears\u003c\/th\u003e\n\u003ctd\u003e1969–1973\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePanel type\u003c\/th\u003e\n\u003ctd\u003eTubs, Cabs \u0026amp; Body Assemblies\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eSteel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eDrive configuration\u003c\/th\u003e\n\u003ctd\u003eLHD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSKU\u003c\/th\u003e\n\u003ctd\u003eSYC-NS42-00\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eSupplied ready for prep and paint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eInstallation\u003c\/th\u003e\n\u003ctd\u003eProfessional \/ experienced builder — approx. 1–3 days for removal and replacement, excluding refit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWelding required\u003c\/th\u003e\n\u003ctd\u003eNo — bolt-on \/ transfer fit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eThis body assembly fits the \u003cstrong\u003eNissan \/ Datsun 240Z\u003c\/strong\u003e, model years \u003cstrong\u003e1969–1973\u003c\/strong\u003e. Panels listed 1969–1973 fit the 240Z (S30); many pressings carry over to the 260Z with detail changes — compare flange and trim-hole locations if fitting to a later S30. The 240Z is a unibody: structural panels should be welded in at factory seams by a competent welder.\u003c\/p\u003e\u003cp\u003eAs with any reproduction panel, trial-fit against the vehicle before final welding or paint. Minor adjustment at flanges and mounting points is a normal part of professional panel fitting, even with precision replica pressings.\u003c\/p\u003e\u003ch2\u003eWhy replace instead of repair\u003c\/h2\u003e\u003cp\u003eEvery hour spent cutting corrosion out of an original panel is an hour not spent finishing the vehicle — and rust repair is the most open-ended line in any restoration budget. A new replica body assembly gives you a fixed cost, a known timeline and straight steel from day one. No hunting classifieds for a donor 240Z, no cutting up a survivor for one usable panel, no discovering that the ‘solid’ second-hand panel you shipped across the country rusted the same way yours did.\u003c\/p\u003e\u003ch2\u003eAbout the Nissan \/ Datsun 240Z\u003c\/h2\u003e\u003cp\u003eThe Datsun 240Z (Nissan S30, 1969–1973) changed the sports car market: a 2.4-litre overhead-cam six, independent suspension and coupe styling at a price that undercut everything from Europe. It also became one of the most rust-prone classics of its era. Nissan's thin-gauge unibody steel, minimal factory rust-proofing and moisture-trapping box sections mean that nearly every surviving S30 needs structural and cosmetic sheet metal during restoration. With concours 240Z values now well into six figures, correctly stamped reproduction panels have become essential to the market.\u003c\/p\u003e\u003cp\u003eThe S30 rusts everywhere moisture settles: floor pans and frame rails, dogleg and rocker sections, rear quarters and wheel arches, the battery tray and surrounding cowl, front fenders around the headlight buckets, and the hatch slam panel. Because the 240Z is a unibody, replacing corroded panels properly — with correct-profile steel welded at factory seam locations — is a structural repair, not just a cosmetic one.\u003c\/p\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eDifficulty:\u003c\/strong\u003e Professional \/ experienced builder  |  \u003cstrong\u003eTypical time:\u003c\/strong\u003e 1–3 days for removal and replacement, excluding refit  |  \u003cstrong\u003eWelding required:\u003c\/strong\u003e no.\u003c\/p\u003e\u003cp\u003eA complete assembly replaces unbolt-and-lift structure: disconnect wiring, fuel and brake lines routed through the body, unbolt the mounts, and lift the old structure off the chassis. Inspect and refurbish chassis outriggers and mounts before the new assembly goes on — new body on rusty mounts is wasted money. Shim to factory alignment before final torque, then transfer doors and hardware and set all gaps. These assemblies ship by international sea freight in dedicated crates; inspect on delivery and photograph the crate before opening.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTools:\u003c\/strong\u003e engine crane or several helpers, body-mount hardware, alignment datums, transport-damage inspection kit.\u003cbr\u003e\u003cstrong\u003eCommon mistakes to avoid:\u003c\/strong\u003e fitting to unrestored body mounts, discarding shims, and skipping the delivery inspection.\u003c\/p\u003e\u003ch2\u003eQuality \u0026amp; Manufacturing\u003c\/h2\u003e\u003cp\u003eBodyBros replica panels are pressed on dedicated tooling developed from measured original panels, in automotive-grade material matched to the application. Pressings are checked against reference bucks for profile, flange geometry and hole placement before packing. Steel panels are supplied with a protective primer coating ready for preparation and refinishing; alloy and plastic parts are supplied ready to prepare and paint. These are aftermarket replica restoration parts — manufactured by BodyBros, not by the original vehicle maker.\u003c\/p\u003e\u003ch2\u003eWorldwide Delivery\u003c\/h2\u003e\u003cp\u003eWe ship worldwide — including the United States, Canada, the UK, Europe, Australia and New Zealand. Panels are packed in purpose-built cartons or timber crates depending on size; large assemblies travel by sea or air freight with tracking. Duties and taxes are calculated at checkout or on arrival depending on destination. See our \u003ca href=\"\/pages\/shipping\"\u003eShipping \u0026amp; Delivery\u003c\/a\u003e page for lead times to your region.\u003c\/p\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003ch3\u003eWill this body assembly fit my Nissan \/ Datsun 240Z?\u003c\/h3\u003e\u003cp\u003eIt fits 1969–1973 models as listed above. Panels listed 1969–1973 fit the 240Z (S30); many pressings carry over to the 260Z with detail changes — compare flange and trim-hole locations if fitting to a later S30. The 240Z is a unibody: structural panels should be welded in at factory seams by a competent welder.\u003c\/p\u003e\u003ch3\u003eIs welding required to install it?\u003c\/h3\u003e\u003cp\u003eNo. This part installs as a bolt-on or transfer fit using standard hand tools — see the installation notes above.\u003c\/p\u003e\u003ch3\u003eCan it replace a rusted original panel?\u003c\/h3\u003e\u003cp\u003eYes — that is exactly what it is made for. The Nissan \/ Datsun 240Z commonly rusts in floor pans and rails, doglegs and rockers, rear quarters, the battery tray area, front fenders and the hatch surround, and this replica pressing replaces corroded original metal with new steel — no donor vehicle required.\u003c\/p\u003e\u003ch3\u003eDo you ship this internationally?\u003c\/h3\u003e\u003cp\u003eYes. We ship worldwide with tracked freight; larger panels and assemblies travel in purpose-built crates. Delivery times and freight options for your country are shown at checkout and on our Shipping page.\u003c\/p\u003e\u003ch3\u003eWhat finish does the panel arrive in?\u003c\/h3\u003e\u003cp\u003eIt arrives ready for preparation and paint. Like any replacement body panel, it should be test-fitted, prepared and refinished before final installation.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eBodyBros is an independent manufacturer of replica restoration panels. Vehicle make and model names are used for fitment identification only; BodyBros products are aftermarket parts and BodyBros is not affiliated with or endorsed by Nissan.\u003c\/em\u003e\u003c\/p\u003e\u003cp\u003e\u003cem\u003eExplore more: \u003ca href=\"\/collections\/datsun-240z\"\u003eall Nissan \/ Datsun 240Z panels\u003c\/a\u003e · \u003ca href=\"\/collections\/panels-tubs-cabs\"\u003etubs, cabs \u0026amp; body assemblies\u003c\/a\u003e · \u003ca href=\"\/blogs\/knowledge\/choosing-reproduction-body-panels\"\u003ehow to choose reproduction panels\u003c\/a\u003e\u003c\/em\u003e\u003c\/p\u003e","brand":"BodyBros","offers":[{"title":"Default Title","offer_id":44126921424961,"sku":"SYC-NS42-00","price":9800.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/1468\/8321\/files\/syc-ns42-00.webp?v=1783306637"}],"url":"https:\/\/rebornretros.com\/collections\/datsun-240z.oembed","provider":"classicbody","version":"1.0","type":"link"}