{"title":"Quarter, Corner \u0026 Side Panels","description":"\u003cp\u003eQuarter panels, rear corner panels, upper corner panels, rock panels and body-side pressings — the outer rear sheet metal that catches everything the rear wheels throw and shows every flaw in a restoration. Coverage across Land Cruiser FJ40\/FJ45, early Ford Bronco, Land Rover Defender side frames and Datsun 240Z.\u003c\/p\u003e\u003ch2\u003eThe panel everyone sees\u003c\/h2\u003e\u003cp\u003eRear quarters and corners define a truck's stance in photographs: swage lines, arch profile and the gap to the tailgate. They're also the most common rust repair on every platform we cover, because the factory placed them directly behind an unlined wheel arch. Patching heavily pitted quarters costs more in labour than cutting them out and welding a full pressing in at factory seams.\u003c\/p\u003e\u003ch2\u003eInstallation reality\u003c\/h2\u003e\u003cp\u003eThese are cut-and-weld repairs: map the factory seams, cut back to sound metal, hang the new panel with the tailgate and door present so gaps are real, plug-weld at original spacing, work heat in short sequences. Inner structure (wheel housings, braces) should be repaired in the same operation.\u003c\/p\u003e\u003ch3\u003eFull quarter or corner patch?\u003c\/h3\u003e\u003cp\u003eIf rust is confined below the swage line or within 150 mm of a corner, a \u003ca href=\"\/collections\/panels-patch-panels\"\u003epatch panel\u003c\/a\u003e saves money. Beyond that, the full pressing gives a cleaner, faster result.\u003c\/p\u003e\u003ch3\u003eAre quarters handed?\u003c\/h3\u003e\u003cp\u003eYes — LH\/RH are separate pressings, listed separately.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eRelated: \u003ca href=\"\/collections\/panels-wheel-housings\"\u003ewheel housings\u003c\/a\u003e · \u003ca href=\"\/collections\/panels-back-panels\"\u003eback panels\u003c\/a\u003e\u003c\/em\u003e\u003c\/p\u003e","products":[{"product_id":"toyota-land-cruiser-fj45-upper-corner-window-panel-lh","title":"Upper Corner Window Panel, LH (1979-1984) – for Toyota Land Cruiser FJ45 (Steel)","description":"\u003cp\u003eSave your restoration hours for the work that shows: this replica upper corner window panel suits 1979-1984 Toyota Land Cruiser FJ45 builds, left-hand (LH) side and replaces panels that would cost more in repair labour than they are worth. Manufactured in steel to match the original pressing, it fits the way the panel it replaces once did — without the rust, dents or filler.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFits\u003c\/th\u003e\n\u003ctd\u003eToyota Land Cruiser FJ45\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eYears\u003c\/th\u003e\n\u003ctd\u003e1979-1984\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePanel type\u003c\/th\u003e\n\u003ctd\u003eQuarter, Corner \u0026amp; Side Panels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eSteel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSide\u003c\/th\u003e\n\u003ctd\u003eLE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSKU\u003c\/th\u003e\n\u003ctd\u003eSYC-TY65-16R-1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eSupplied ready for prep and paint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eInstallation\u003c\/th\u003e\n\u003ctd\u003eAdvanced — approx. 4–10 hours per panel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWelding required\u003c\/th\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eThis panel fits the \u003cstrong\u003eToyota Land Cruiser FJ45\u003c\/strong\u003e, model years \u003cstrong\u003e1979-1984\u003c\/strong\u003e. FJ45 cab panels differ from FJ40 items behind the doors — always confirm whether a panel is 40-specific, 45-specific or shared across the 40-Series before ordering. Bed and back-panel parts are FJ45-only. Match your build year, as pressings changed across the long production run.\u003c\/p\u003e\u003cp\u003eAs with any reproduction panel, trial-fit against the vehicle before final welding or paint. Minor adjustment at flanges and mounting points is a normal part of professional panel fitting, even with precision replica pressings.\u003c\/p\u003e\u003ch2\u003eThe maths of new steel\u003c\/h2\u003e\u003cp\u003eRestorers rarely regret buying a new panel; they regret the three weekends spent trying to save an old one first. Repairing a corroded panel means paying for blasting, fabrication time and filler — and the result is still fifty-year-old metal. A replica pressing costs a known amount, arrives straight, and spares a donor vehicle from being cut up for parts. Your original panel can stay with the vehicle for provenance; your build gets metal you can trust.\u003c\/p\u003e\u003ch2\u003eAbout the Toyota Land Cruiser FJ45\u003c\/h2\u003e\u003cp\u003eThe Toyota Land Cruiser FJ45 is the long-wheelbase, load-carrying member of the 40-Series family, built from 1960 through the mid-1980s as a pickup, cab-chassis and troop-carrier. It shares its front clip, windscreen frame and much of its cab structure with the FJ40, but adds a longer frame, a dedicated steel truck bed and unique rear cab panels. FJ45s worked even harder than their short-wheelbase brothers — most spent their lives on farms and stations — so straight, rust-free original examples are now genuinely rare, and values for well-restored trucks have climbed sharply.\u003c\/p\u003e\u003cp\u003eThe FJ45's trouble spots mirror the FJ40's, with the addition of the truck bed itself: bed floors, bed fenders, tailgates and the lower back panel of the cab all trap moisture and rot from the inside out. Reproduction cab and bed panels stamped to the original profiles let restorers replace entire corroded structures instead of forming patch sections by hand.\u003c\/p\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eDifficulty:\u003c\/strong\u003e Advanced  |  \u003cstrong\u003eTypical time:\u003c\/strong\u003e 4–10 hours per panel  |  \u003cstrong\u003eWelding required:\u003c\/strong\u003e yes.\u003c\/p\u003e\u003cp\u003eQuarters and corners are cut-and-weld repairs. Map the factory seams first, cut the old panel back to sound metal, and hang the new pressing with clamps to check line-up against the tailgate, door and wheel arch before welding. Plug-weld at factory locations, work in short sequences to control heat, and dress the welds before priming. On the bench this is the most satisfying repair on the truck; rushed, it's the most visible mistake.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTools:\u003c\/strong\u003e spot-weld drill, MIG welder, panel clamps, hammer and dolly, seam sealer.\u003cbr\u003e\u003cstrong\u003eCommon mistakes to avoid:\u003c\/strong\u003e welding long continuous beads that warp the panel, ignoring the inner structure behind the quarter, and trusting the old panel's position when it was already sagging.\u003c\/p\u003e\u003cp\u003eIf you are not an experienced welder, we recommend professional installation for this panel — it is structural, and correct seam welding matters for both safety and finish.\u003c\/p\u003e\u003ch2\u003eQuality \u0026amp; Manufacturing\u003c\/h2\u003e\u003cp\u003eBodyBros replica panels are pressed on dedicated tooling developed from measured original panels, in automotive-grade material matched to the application. Pressings are checked against reference bucks for profile, flange geometry and hole placement before packing. Steel panels are supplied with a protective primer coating ready for preparation and refinishing; alloy and plastic parts are supplied ready to prepare and paint. These are aftermarket replica restoration parts — manufactured by BodyBros, not by the original vehicle maker.\u003c\/p\u003e\u003ch2\u003eWorldwide Delivery\u003c\/h2\u003e\u003cp\u003eWe ship worldwide — including the United States, Canada, the UK, Europe, Australia and New Zealand. Panels are packed in purpose-built cartons or timber crates depending on size; large assemblies travel by sea or air freight with tracking. Duties and taxes are calculated at checkout or on arrival depending on destination. See our \u003ca href=\"\/pages\/shipping\"\u003eShipping \u0026amp; Delivery\u003c\/a\u003e page for lead times to your region.\u003c\/p\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003ch3\u003eWill this panel fit my Toyota Land Cruiser FJ45?\u003c\/h3\u003e\u003cp\u003eIt fits 1979-1984 models as listed above. FJ45 cab panels differ from FJ40 items behind the doors — always confirm whether a panel is 40-specific, 45-specific or shared across the 40-Series before ordering. Bed and back-panel parts are FJ45-only. Match your build year, as pressings changed across the long production run.\u003c\/p\u003e\u003ch3\u003eIs welding required to install it?\u003c\/h3\u003e\u003cp\u003eYes — this is a welded structural panel. It should be trial-fitted, clamped and plug-welded at the factory seam locations, ideally by an experienced welder.\u003c\/p\u003e\u003ch3\u003eCan it replace a rusted original panel?\u003c\/h3\u003e\u003cp\u003eYes — that is exactly what it is made for. The Toyota Land Cruiser FJ45 commonly rusts in the cab back panel, bed floor and bed fenders, tailgate, sills, floors and lower corners, and this replica pressing replaces corroded original metal with new steel — no donor vehicle required.\u003c\/p\u003e\u003ch3\u003eDo you ship this internationally?\u003c\/h3\u003e\u003cp\u003eYes. We ship worldwide with tracked freight; larger panels and assemblies travel in purpose-built crates. Delivery times and freight options for your country are shown at checkout and on our Shipping page.\u003c\/p\u003e\u003ch3\u003eWhat finish does the panel arrive in?\u003c\/h3\u003e\u003cp\u003eIt arrives ready for preparation and paint. Like any replacement body panel, it should be test-fitted, prepared and refinished before final installation.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eBodyBros is an independent manufacturer of replica restoration panels. Vehicle make and model names are used for fitment identification only; BodyBros products are aftermarket parts and BodyBros is not affiliated with or endorsed by Toyota.\u003c\/em\u003e\u003c\/p\u003e\u003cp\u003e\u003cem\u003eExplore more: \u003ca href=\"\/collections\/toyota-land-cruiser-fj45\"\u003eall Toyota Land Cruiser FJ45 panels\u003c\/a\u003e · \u003ca href=\"\/collections\/panels-side-panels\"\u003equarter, corner \u0026amp; side panels\u003c\/a\u003e · \u003ca href=\"\/blogs\/knowledge\/choosing-reproduction-body-panels\"\u003ehow to choose reproduction panels\u003c\/a\u003e\u003c\/em\u003e\u003c\/p\u003e","brand":"BodyBros","offers":[{"title":"Default Title","offer_id":44126712463425,"sku":"SYC-TY65-16R-1","price":162.52,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/1468\/8321\/files\/SYC-TY65-16R-1_d3c689a2-6f23-4cb6-a420-69f77dab64ce.jpg?v=1783303557"},{"product_id":"toyota-land-cruiser-fj45-upper-corner-window-panel-lh-steel","title":"Upper Corner Window Panel, LH (1979-1984) (Type 2) – for Toyota Land Cruiser FJ45 (Steel)","description":"\u003cp\u003eSave your restoration hours for the work that shows: this replica upper corner window panel suits 1979-1984 Toyota Land Cruiser FJ45 builds, left-hand (LH) side and replaces panels that would cost more in repair labour than they are worth. Manufactured in steel to match the original pressing, it fits the way the panel it replaces once did — without the rust, dents or filler.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFits\u003c\/th\u003e\n\u003ctd\u003eToyota Land Cruiser FJ45\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eYears\u003c\/th\u003e\n\u003ctd\u003e1979-1984\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePanel type\u003c\/th\u003e\n\u003ctd\u003eQuarter, Corner \u0026amp; Side Panels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eSteel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSide\u003c\/th\u003e\n\u003ctd\u003eLE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSKU\u003c\/th\u003e\n\u003ctd\u003eSYC-TY65-16L-1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eSupplied ready for prep and paint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eInstallation\u003c\/th\u003e\n\u003ctd\u003eAdvanced — approx. 4–10 hours per panel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWelding required\u003c\/th\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eThis panel fits the \u003cstrong\u003eToyota Land Cruiser FJ45\u003c\/strong\u003e, model years \u003cstrong\u003e1979-1984\u003c\/strong\u003e. FJ45 cab panels differ from FJ40 items behind the doors — always confirm whether a panel is 40-specific, 45-specific or shared across the 40-Series before ordering. Bed and back-panel parts are FJ45-only. Match your build year, as pressings changed across the long production run.\u003c\/p\u003e\u003cp\u003eAs with any reproduction panel, trial-fit against the vehicle before final welding or paint. Minor adjustment at flanges and mounting points is a normal part of professional panel fitting, even with precision replica pressings.\u003c\/p\u003e\u003ch2\u003eSkip the rust bucket rescue\u003c\/h2\u003e\u003cp\u003eThe oldroute to a straight Toyota Land Cruiser FJ45 body was buying a second parts vehicle and hoping its panel was better than yours. That gamble costs storage, freight and usually disappointment — donor panels carry the same decades of corrosion in the same places. New replica steel ends the cycle: predictable cost, predictable fit, and every panel of your actual vehicle preserved.\u003c\/p\u003e\u003ch2\u003eAbout the Toyota Land Cruiser FJ45\u003c\/h2\u003e\u003cp\u003eThe Toyota Land Cruiser FJ45 is the long-wheelbase, load-carrying member of the 40-Series family, built from 1960 through the mid-1980s as a pickup, cab-chassis and troop-carrier. It shares its front clip, windscreen frame and much of its cab structure with the FJ40, but adds a longer frame, a dedicated steel truck bed and unique rear cab panels. FJ45s worked even harder than their short-wheelbase brothers — most spent their lives on farms and stations — so straight, rust-free original examples are now genuinely rare, and values for well-restored trucks have climbed sharply.\u003c\/p\u003e\u003cp\u003eThe FJ45's trouble spots mirror the FJ40's, with the addition of the truck bed itself: bed floors, bed fenders, tailgates and the lower back panel of the cab all trap moisture and rot from the inside out. Reproduction cab and bed panels stamped to the original profiles let restorers replace entire corroded structures instead of forming patch sections by hand.\u003c\/p\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eDifficulty:\u003c\/strong\u003e Advanced  |  \u003cstrong\u003eTypical time:\u003c\/strong\u003e 4–10 hours per panel  |  \u003cstrong\u003eWelding required:\u003c\/strong\u003e yes.\u003c\/p\u003e\u003cp\u003eQuarters and corners are cut-and-weld repairs. Map the factory seams first, cut the old panel back to sound metal, and hang the new pressing with clamps to check line-up against the tailgate, door and wheel arch before welding. Plug-weld at factory locations, work in short sequences to control heat, and dress the welds before priming. On the bench this is the most satisfying repair on the truck; rushed, it's the most visible mistake.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTools:\u003c\/strong\u003e spot-weld drill, MIG welder, panel clamps, hammer and dolly, seam sealer.\u003cbr\u003e\u003cstrong\u003eCommon mistakes to avoid:\u003c\/strong\u003e welding long continuous beads that warp the panel, ignoring the inner structure behind the quarter, and trusting the old panel's position when it was already sagging.\u003c\/p\u003e\u003cp\u003eIf you are not an experienced welder, we recommend professional installation for this panel — it is structural, and correct seam welding matters for both safety and finish.\u003c\/p\u003e\u003ch2\u003eQuality \u0026amp; Manufacturing\u003c\/h2\u003e\u003cp\u003eBodyBros replica panels are pressed on dedicated tooling developed from measured original panels, in automotive-grade material matched to the application. Pressings are checked against reference bucks for profile, flange geometry and hole placement before packing. Steel panels are supplied with a protective primer coating ready for preparation and refinishing; alloy and plastic parts are supplied ready to prepare and paint. These are aftermarket replica restoration parts — manufactured by BodyBros, not by the original vehicle maker.\u003c\/p\u003e\u003ch2\u003eWorldwide Delivery\u003c\/h2\u003e\u003cp\u003eWe ship worldwide — including the United States, Canada, the UK, Europe, Australia and New Zealand. Panels are packed in purpose-built cartons or timber crates depending on size; large assemblies travel by sea or air freight with tracking. Duties and taxes are calculated at checkout or on arrival depending on destination. See our \u003ca href=\"\/pages\/shipping\"\u003eShipping \u0026amp; Delivery\u003c\/a\u003e page for lead times to your region.\u003c\/p\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003ch3\u003eWill this panel fit my Toyota Land Cruiser FJ45?\u003c\/h3\u003e\u003cp\u003eIt fits 1979-1984 models as listed above. FJ45 cab panels differ from FJ40 items behind the doors — always confirm whether a panel is 40-specific, 45-specific or shared across the 40-Series before ordering. Bed and back-panel parts are FJ45-only. Match your build year, as pressings changed across the long production run.\u003c\/p\u003e\u003ch3\u003eIs welding required to install it?\u003c\/h3\u003e\u003cp\u003eYes — this is a welded structural panel. It should be trial-fitted, clamped and plug-welded at the factory seam locations, ideally by an experienced welder.\u003c\/p\u003e\u003ch3\u003eCan it replace a rusted original panel?\u003c\/h3\u003e\u003cp\u003eYes — that is exactly what it is made for. The Toyota Land Cruiser FJ45 commonly rusts in the cab back panel, bed floor and bed fenders, tailgate, sills, floors and lower corners, and this replica pressing replaces corroded original metal with new steel — no donor vehicle required.\u003c\/p\u003e\u003ch3\u003eDo you ship this internationally?\u003c\/h3\u003e\u003cp\u003eYes. We ship worldwide with tracked freight; larger panels and assemblies travel in purpose-built crates. Delivery times and freight options for your country are shown at checkout and on our Shipping page.\u003c\/p\u003e\u003ch3\u003eWhat finish does the panel arrive in?\u003c\/h3\u003e\u003cp\u003eIt arrives ready for preparation and paint. Like any replacement body panel, it should be test-fitted, prepared and refinished before final installation.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eBodyBros is an independent manufacturer of replica restoration panels. Vehicle make and model names are used for fitment identification only; BodyBros products are aftermarket parts and BodyBros is not affiliated with or endorsed by Toyota.\u003c\/em\u003e\u003c\/p\u003e\u003cp\u003e\u003cem\u003eExplore more: \u003ca href=\"\/collections\/toyota-land-cruiser-fj45\"\u003eall Toyota Land Cruiser FJ45 panels\u003c\/a\u003e · \u003ca href=\"\/collections\/panels-side-panels\"\u003equarter, corner \u0026amp; side panels\u003c\/a\u003e · \u003ca href=\"\/blogs\/knowledge\/choosing-reproduction-body-panels\"\u003ehow to choose reproduction panels\u003c\/a\u003e\u003c\/em\u003e\u003c\/p\u003e","brand":"BodyBros","offers":[{"title":"Default Title","offer_id":44126712496193,"sku":"SYC-TY65-16L-1","price":162.52,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/1468\/8321\/files\/SYC-TY65-16L-1_c47c1563-cf84-4026-9a6b-62bc7bec29ef.jpg?v=1783303558"},{"product_id":"ford-bronco-1966-77-roof-side-panel","title":"Roof Side Panel – for Ford Bronco 1966–77 (Steel)","description":"\u003cp\u003eA direct-fit replica roof side panel for 1966–1977 Ford Bronco (First Generation) restorations. Stamped in steel to original-style contours so it lines up with existing seams, gaps and hardware locations — the fastest route from rust bucket to straight body without sacrificing a donor car.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFits\u003c\/th\u003e\n\u003ctd\u003eFord Bronco (First Generation)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eYears\u003c\/th\u003e\n\u003ctd\u003e1966–1977\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePanel type\u003c\/th\u003e\n\u003ctd\u003eQuarter, Corner \u0026amp; Side Panels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eSteel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSKU\u003c\/th\u003e\n\u003ctd\u003eSYC-FD44-13\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eSupplied ready for prep and paint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eInstallation\u003c\/th\u003e\n\u003ctd\u003eAdvanced — approx. 4–10 hours per panel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWelding required\u003c\/th\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eThis panel fits the \u003cstrong\u003eFord Bronco (First Generation)\u003c\/strong\u003e, model years \u003cstrong\u003e1966–1977\u003c\/strong\u003e. Panels listed for 1966–1977 fit all first-generation Broncos unless noted; 1966–1968 trucks differ in some trim and grille details, and 'uncut' rear quarters restore the factory wheel-arch line on trucks whose arches were cut. Test-fit before paint, as with any reproduction panel.\u003c\/p\u003e\u003cp\u003eAs with any reproduction panel, trial-fit against the vehicle before final welding or paint. Minor adjustment at flanges and mounting points is a normal part of professional panel fitting, even with precision replica pressings.\u003c\/p\u003e\u003ch2\u003eSkip the rust bucket rescue\u003c\/h2\u003e\u003cp\u003eThe oldroute to a straight Ford Bronco (First Generation) body was buying a second parts vehicle and hoping its panel was better than yours. That gamble costs storage, freight and usually disappointment — donor panels carry the same decades of corrosion in the same places. New replica steel ends the cycle: predictable cost, predictable fit, and every panel of your actual vehicle preserved.\u003c\/p\u003e\u003ch2\u003eAbout the Ford Bronco (First Generation)\u003c\/h2\u003e\u003cp\u003eThe first-generation Ford Bronco, built from 1966 to 1977, has gone from farm truck to blue-chip collectible — early uncut Broncos now trade at prices that justify full body-off restorations. Ford built the early Bronco with a fully boxed frame and a simple welded steel body offered as a wagon, half-cab pickup and (briefly) roadster. Because so many Broncos had their rear quarters cut for larger tyres in the 1970s and 80s, straight original sheet metal is scarce, and complete reproduction bodies, cabs and individual stamped panels are now central to the Bronco restoration industry.\u003c\/p\u003e\u003cp\u003eEarly Broncos rust in the usual Ford truck places: floor pans front and rear, rocker panels, inner and outer rear quarters, wheel housings, fender aprons, door bottoms and the tailgate. The good news is that virtually every panel on a 1966–1977 Bronco is reproduced to a high standard, so builders can replace entire corroded assemblies — or start from a complete new body — rather than repairing pitted original steel.\u003c\/p\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eDifficulty:\u003c\/strong\u003e Advanced  |  \u003cstrong\u003eTypical time:\u003c\/strong\u003e 4–10 hours per panel  |  \u003cstrong\u003eWelding required:\u003c\/strong\u003e yes.\u003c\/p\u003e\u003cp\u003eQuarters and corners are cut-and-weld repairs. Map the factory seams first, cut the old panel back to sound metal, and hang the new pressing with clamps to check line-up against the tailgate, door and wheel arch before welding. Plug-weld at factory locations, work in short sequences to control heat, and dress the welds before priming. On the bench this is the most satisfying repair on the truck; rushed, it's the most visible mistake.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTools:\u003c\/strong\u003e spot-weld drill, MIG welder, panel clamps, hammer and dolly, seam sealer.\u003cbr\u003e\u003cstrong\u003eCommon mistakes to avoid:\u003c\/strong\u003e welding long continuous beads that warp the panel, ignoring the inner structure behind the quarter, and trusting the old panel's position when it was already sagging.\u003c\/p\u003e\u003cp\u003eIf you are not an experienced welder, we recommend professional installation for this panel — it is structural, and correct seam welding matters for both safety and finish.\u003c\/p\u003e\u003ch2\u003eQuality \u0026amp; Manufacturing\u003c\/h2\u003e\u003cp\u003eBodyBros replica panels are pressed on dedicated tooling developed from measured original panels, in automotive-grade material matched to the application. Pressings are checked against reference bucks for profile, flange geometry and hole placement before packing. Steel panels are supplied with a protective primer coating ready for preparation and refinishing; alloy and plastic parts are supplied ready to prepare and paint. These are aftermarket replica restoration parts — manufactured by BodyBros, not by the original vehicle maker.\u003c\/p\u003e\u003ch2\u003eWorldwide Delivery\u003c\/h2\u003e\u003cp\u003eWe ship worldwide — including the United States, Canada, the UK, Europe, Australia and New Zealand. Panels are packed in purpose-built cartons or timber crates depending on size; large assemblies travel by sea or air freight with tracking. Duties and taxes are calculated at checkout or on arrival depending on destination. See our \u003ca href=\"\/pages\/shipping\"\u003eShipping \u0026amp; Delivery\u003c\/a\u003e page for lead times to your region.\u003c\/p\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003ch3\u003eWill this panel fit my Ford Bronco (First Generation)?\u003c\/h3\u003e\u003cp\u003eIt fits 1966–1977 models as listed above. Panels listed for 1966–1977 fit all first-generation Broncos unless noted; 1966–1968 trucks differ in some trim and grille details, and 'uncut' rear quarters restore the factory wheel-arch line on trucks whose arches were cut. Test-fit before paint, as with any reproduction panel.\u003c\/p\u003e\u003ch3\u003eIs welding required to install it?\u003c\/h3\u003e\u003cp\u003eYes — this is a welded structural panel. It should be trial-fitted, clamped and plug-welded at the factory seam locations, ideally by an experienced welder.\u003c\/p\u003e\u003ch3\u003eCan it replace a rusted original panel?\u003c\/h3\u003e\u003cp\u003eYes — that is exactly what it is made for. The Ford Bronco (First Generation) commonly rusts in floor pans, rockers, rear quarters and wheel housings, fender aprons, door bottoms and tailgates, and this replica pressing replaces corroded original metal with new steel — no donor vehicle required.\u003c\/p\u003e\u003ch3\u003eDo you ship this internationally?\u003c\/h3\u003e\u003cp\u003eYes. We ship worldwide with tracked freight; larger panels and assemblies travel in purpose-built crates. Delivery times and freight options for your country are shown at checkout and on our Shipping page.\u003c\/p\u003e\u003ch3\u003eWhat finish does the panel arrive in?\u003c\/h3\u003e\u003cp\u003eIt arrives ready for preparation and paint. Like any replacement body panel, it should be test-fitted, prepared and refinished before final installation.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eBodyBros is an independent manufacturer of replica restoration panels. Vehicle make and model names are used for fitment identification only; BodyBros products are aftermarket parts and BodyBros is not affiliated with or endorsed by Ford.\u003c\/em\u003e\u003c\/p\u003e\u003cp\u003e\u003cem\u003eExplore more: \u003ca href=\"\/collections\/ford-bronco-1966-77\"\u003eall Ford Bronco (First Generation) panels\u003c\/a\u003e · \u003ca href=\"\/collections\/panels-side-panels\"\u003equarter, corner \u0026amp; side panels\u003c\/a\u003e · \u003ca href=\"\/blogs\/knowledge\/choosing-reproduction-body-panels\"\u003ehow to choose reproduction panels\u003c\/a\u003e\u003c\/em\u003e\u003c\/p\u003e","brand":"BodyBros","offers":[{"title":"Default Title","offer_id":44126716919873,"sku":"SYC-FD44-13","price":2350.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/1468\/8321\/files\/SYC-FD44-13_13b4b52d-f415-434e-9941-a7e751ff335c.jpg?v=1783303673"},{"product_id":"ford-bronco-1966-77-roof-with-side-panel","title":"Roof with Side Panel – for Ford Bronco 1966–77 (Steel)","description":"\u003cp\u003eA direct-fit replica roof with side panel for 1966–1977 Ford Bronco (First Generation) restorations. Stamped in steel to original-style contours so it lines up with existing seams, gaps and hardware locations — the fastest route from rust bucket to straight body without sacrificing a donor car.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFits\u003c\/th\u003e\n\u003ctd\u003eFord Bronco (First Generation)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eYears\u003c\/th\u003e\n\u003ctd\u003e1966–1977\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePanel type\u003c\/th\u003e\n\u003ctd\u003eQuarter, Corner \u0026amp; Side Panels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eSteel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSKU\u003c\/th\u003e\n\u003ctd\u003eSYC-FD44-13-1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eSupplied ready for prep and paint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eInstallation\u003c\/th\u003e\n\u003ctd\u003eAdvanced — approx. 4–10 hours per panel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWelding required\u003c\/th\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eThis panel fits the \u003cstrong\u003eFord Bronco (First Generation)\u003c\/strong\u003e, model years \u003cstrong\u003e1966–1977\u003c\/strong\u003e. Panels listed for 1966–1977 fit all first-generation Broncos unless noted; 1966–1968 trucks differ in some trim and grille details, and 'uncut' rear quarters restore the factory wheel-arch line on trucks whose arches were cut. Test-fit before paint, as with any reproduction panel.\u003c\/p\u003e\u003cp\u003eAs with any reproduction panel, trial-fit against the vehicle before final welding or paint. Minor adjustment at flanges and mounting points is a normal part of professional panel fitting, even with precision replica pressings.\u003c\/p\u003e\u003ch2\u003eWhy replace instead of repair\u003c\/h2\u003e\u003cp\u003eEvery hour spent cutting corrosion out of an original panel is an hour not spent finishing the vehicle — and rust repair is the most open-ended line in any restoration budget. A new replica panel gives you a fixed cost, a known timeline and straight steel from day one. No hunting classifieds for a donor Generation), no cutting up a survivor for one usable panel, no discovering that the ‘solid’ second-hand panel you shipped across the country rusted the same way yours did.\u003c\/p\u003e\u003ch2\u003eAbout the Ford Bronco (First Generation)\u003c\/h2\u003e\u003cp\u003eThe first-generation Ford Bronco, built from 1966 to 1977, has gone from farm truck to blue-chip collectible — early uncut Broncos now trade at prices that justify full body-off restorations. Ford built the early Bronco with a fully boxed frame and a simple welded steel body offered as a wagon, half-cab pickup and (briefly) roadster. Because so many Broncos had their rear quarters cut for larger tyres in the 1970s and 80s, straight original sheet metal is scarce, and complete reproduction bodies, cabs and individual stamped panels are now central to the Bronco restoration industry.\u003c\/p\u003e\u003cp\u003eEarly Broncos rust in the usual Ford truck places: floor pans front and rear, rocker panels, inner and outer rear quarters, wheel housings, fender aprons, door bottoms and the tailgate. The good news is that virtually every panel on a 1966–1977 Bronco is reproduced to a high standard, so builders can replace entire corroded assemblies — or start from a complete new body — rather than repairing pitted original steel.\u003c\/p\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eDifficulty:\u003c\/strong\u003e Advanced  |  \u003cstrong\u003eTypical time:\u003c\/strong\u003e 4–10 hours per panel  |  \u003cstrong\u003eWelding required:\u003c\/strong\u003e yes.\u003c\/p\u003e\u003cp\u003eQuarters and corners are cut-and-weld repairs. Map the factory seams first, cut the old panel back to sound metal, and hang the new pressing with clamps to check line-up against the tailgate, door and wheel arch before welding. Plug-weld at factory locations, work in short sequences to control heat, and dress the welds before priming. On the bench this is the most satisfying repair on the truck; rushed, it's the most visible mistake.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTools:\u003c\/strong\u003e spot-weld drill, MIG welder, panel clamps, hammer and dolly, seam sealer.\u003cbr\u003e\u003cstrong\u003eCommon mistakes to avoid:\u003c\/strong\u003e welding long continuous beads that warp the panel, ignoring the inner structure behind the quarter, and trusting the old panel's position when it was already sagging.\u003c\/p\u003e\u003cp\u003eIf you are not an experienced welder, we recommend professional installation for this panel — it is structural, and correct seam welding matters for both safety and finish.\u003c\/p\u003e\u003ch2\u003eQuality \u0026amp; Manufacturing\u003c\/h2\u003e\u003cp\u003eBodyBros replica panels are pressed on dedicated tooling developed from measured original panels, in automotive-grade material matched to the application. Pressings are checked against reference bucks for profile, flange geometry and hole placement before packing. Steel panels are supplied with a protective primer coating ready for preparation and refinishing; alloy and plastic parts are supplied ready to prepare and paint. These are aftermarket replica restoration parts — manufactured by BodyBros, not by the original vehicle maker.\u003c\/p\u003e\u003ch2\u003eWorldwide Delivery\u003c\/h2\u003e\u003cp\u003eWe ship worldwide — including the United States, Canada, the UK, Europe, Australia and New Zealand. Panels are packed in purpose-built cartons or timber crates depending on size; large assemblies travel by sea or air freight with tracking. Duties and taxes are calculated at checkout or on arrival depending on destination. See our \u003ca href=\"\/pages\/shipping\"\u003eShipping \u0026amp; Delivery\u003c\/a\u003e page for lead times to your region.\u003c\/p\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003ch3\u003eWill this panel fit my Ford Bronco (First Generation)?\u003c\/h3\u003e\u003cp\u003eIt fits 1966–1977 models as listed above. Panels listed for 1966–1977 fit all first-generation Broncos unless noted; 1966–1968 trucks differ in some trim and grille details, and 'uncut' rear quarters restore the factory wheel-arch line on trucks whose arches were cut. Test-fit before paint, as with any reproduction panel.\u003c\/p\u003e\u003ch3\u003eIs welding required to install it?\u003c\/h3\u003e\u003cp\u003eYes — this is a welded structural panel. It should be trial-fitted, clamped and plug-welded at the factory seam locations, ideally by an experienced welder.\u003c\/p\u003e\u003ch3\u003eCan it replace a rusted original panel?\u003c\/h3\u003e\u003cp\u003eYes — that is exactly what it is made for. The Ford Bronco (First Generation) commonly rusts in floor pans, rockers, rear quarters and wheel housings, fender aprons, door bottoms and tailgates, and this replica pressing replaces corroded original metal with new steel — no donor vehicle required.\u003c\/p\u003e\u003ch3\u003eDo you ship this internationally?\u003c\/h3\u003e\u003cp\u003eYes. We ship worldwide with tracked freight; larger panels and assemblies travel in purpose-built crates. Delivery times and freight options for your country are shown at checkout and on our Shipping page.\u003c\/p\u003e\u003ch3\u003eWhat finish does the panel arrive in?\u003c\/h3\u003e\u003cp\u003eIt arrives ready for preparation and paint. Like any replacement body panel, it should be test-fitted, prepared and refinished before final installation.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eBodyBros is an independent manufacturer of replica restoration panels. Vehicle make and model names are used for fitment identification only; BodyBros products are aftermarket parts and BodyBros is not affiliated with or endorsed by Ford.\u003c\/em\u003e\u003c\/p\u003e\u003cp\u003e\u003cem\u003eExplore more: \u003ca href=\"\/collections\/ford-bronco-1966-77\"\u003eall Ford Bronco (First Generation) panels\u003c\/a\u003e · \u003ca href=\"\/collections\/panels-side-panels\"\u003equarter, corner \u0026amp; side panels\u003c\/a\u003e · \u003ca href=\"\/blogs\/knowledge\/choosing-reproduction-body-panels\"\u003ehow to choose reproduction panels\u003c\/a\u003e\u003c\/em\u003e\u003c\/p\u003e","brand":"BodyBros","offers":[{"title":"Default Title","offer_id":44126716952641,"sku":"SYC-FD44-13-1","price":2850.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/1468\/8321\/files\/SYC-FD44-13-1_c7e29527-1242-4484-b49d-b3adbe8fcfed.jpg?v=1783303674"},{"product_id":"ford-bronco-1966-77-side-panel-lh","title":"Side Panel, LH – for Ford Bronco 1966–77 (Steel)","description":"\u003cp\u003eA direct-fit replica side panel for 1966–1977 Ford Bronco (First Generation) restorations, left-hand (LH) side. Stamped in steel to original-style contours so it lines up with existing seams, gaps and hardware locations — the fastest route from rust bucket to straight body without sacrificing a donor car.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFits\u003c\/th\u003e\n\u003ctd\u003eFord Bronco (First Generation)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eYears\u003c\/th\u003e\n\u003ctd\u003e1966–1977\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePanel type\u003c\/th\u003e\n\u003ctd\u003eQuarter, Corner \u0026amp; Side Panels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eSteel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSide\u003c\/th\u003e\n\u003ctd\u003eLE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSKU\u003c\/th\u003e\n\u003ctd\u003eSYC-FD44-20L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eSupplied ready for prep and paint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eInstallation\u003c\/th\u003e\n\u003ctd\u003eAdvanced — approx. 4–10 hours per panel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWelding required\u003c\/th\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eThis panel fits the \u003cstrong\u003eFord Bronco (First Generation)\u003c\/strong\u003e, model years \u003cstrong\u003e1966–1977\u003c\/strong\u003e. Panels listed for 1966–1977 fit all first-generation Broncos unless noted; 1966–1968 trucks differ in some trim and grille details, and 'uncut' rear quarters restore the factory wheel-arch line on trucks whose arches were cut. Test-fit before paint, as with any reproduction panel.\u003c\/p\u003e\u003cp\u003eAs with any reproduction panel, trial-fit against the vehicle before final welding or paint. Minor adjustment at flanges and mounting points is a normal part of professional panel fitting, even with precision replica pressings.\u003c\/p\u003e\u003ch2\u003eWhy replace instead of repair\u003c\/h2\u003e\u003cp\u003eEvery hour spent cutting corrosion out of an original panel is an hour not spent finishing the vehicle — and rust repair is the most open-ended line in any restoration budget. A new replica panel gives you a fixed cost, a known timeline and straight steel from day one. No hunting classifieds for a donor Generation), no cutting up a survivor for one usable panel, no discovering that the ‘solid’ second-hand panel you shipped across the country rusted the same way yours did.\u003c\/p\u003e\u003ch2\u003eAbout the Ford Bronco (First Generation)\u003c\/h2\u003e\u003cp\u003eThe first-generation Ford Bronco, built from 1966 to 1977, has gone from farm truck to blue-chip collectible — early uncut Broncos now trade at prices that justify full body-off restorations. Ford built the early Bronco with a fully boxed frame and a simple welded steel body offered as a wagon, half-cab pickup and (briefly) roadster. Because so many Broncos had their rear quarters cut for larger tyres in the 1970s and 80s, straight original sheet metal is scarce, and complete reproduction bodies, cabs and individual stamped panels are now central to the Bronco restoration industry.\u003c\/p\u003e\u003cp\u003eEarly Broncos rust in the usual Ford truck places: floor pans front and rear, rocker panels, inner and outer rear quarters, wheel housings, fender aprons, door bottoms and the tailgate. The good news is that virtually every panel on a 1966–1977 Bronco is reproduced to a high standard, so builders can replace entire corroded assemblies — or start from a complete new body — rather than repairing pitted original steel.\u003c\/p\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eDifficulty:\u003c\/strong\u003e Advanced  |  \u003cstrong\u003eTypical time:\u003c\/strong\u003e 4–10 hours per panel  |  \u003cstrong\u003eWelding required:\u003c\/strong\u003e yes.\u003c\/p\u003e\u003cp\u003eQuarters and corners are cut-and-weld repairs. Map the factory seams first, cut the old panel back to sound metal, and hang the new pressing with clamps to check line-up against the tailgate, door and wheel arch before welding. Plug-weld at factory locations, work in short sequences to control heat, and dress the welds before priming. On the bench this is the most satisfying repair on the truck; rushed, it's the most visible mistake.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTools:\u003c\/strong\u003e spot-weld drill, MIG welder, panel clamps, hammer and dolly, seam sealer.\u003cbr\u003e\u003cstrong\u003eCommon mistakes to avoid:\u003c\/strong\u003e welding long continuous beads that warp the panel, ignoring the inner structure behind the quarter, and trusting the old panel's position when it was already sagging.\u003c\/p\u003e\u003cp\u003eIf you are not an experienced welder, we recommend professional installation for this panel — it is structural, and correct seam welding matters for both safety and finish.\u003c\/p\u003e\u003ch2\u003eQuality \u0026amp; Manufacturing\u003c\/h2\u003e\u003cp\u003eBodyBros replica panels are pressed on dedicated tooling developed from measured original panels, in automotive-grade material matched to the application. Pressings are checked against reference bucks for profile, flange geometry and hole placement before packing. Steel panels are supplied with a protective primer coating ready for preparation and refinishing; alloy and plastic parts are supplied ready to prepare and paint. These are aftermarket replica restoration parts — manufactured by BodyBros, not by the original vehicle maker.\u003c\/p\u003e\u003ch2\u003eWorldwide Delivery\u003c\/h2\u003e\u003cp\u003eWe ship worldwide — including the United States, Canada, the UK, Europe, Australia and New Zealand. Panels are packed in purpose-built cartons or timber crates depending on size; large assemblies travel by sea or air freight with tracking. Duties and taxes are calculated at checkout or on arrival depending on destination. See our \u003ca href=\"\/pages\/shipping\"\u003eShipping \u0026amp; Delivery\u003c\/a\u003e page for lead times to your region.\u003c\/p\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003ch3\u003eWill this panel fit my Ford Bronco (First Generation)?\u003c\/h3\u003e\u003cp\u003eIt fits 1966–1977 models as listed above. Panels listed for 1966–1977 fit all first-generation Broncos unless noted; 1966–1968 trucks differ in some trim and grille details, and 'uncut' rear quarters restore the factory wheel-arch line on trucks whose arches were cut. Test-fit before paint, as with any reproduction panel.\u003c\/p\u003e\u003ch3\u003eIs welding required to install it?\u003c\/h3\u003e\u003cp\u003eYes — this is a welded structural panel. It should be trial-fitted, clamped and plug-welded at the factory seam locations, ideally by an experienced welder.\u003c\/p\u003e\u003ch3\u003eCan it replace a rusted original panel?\u003c\/h3\u003e\u003cp\u003eYes — that is exactly what it is made for. The Ford Bronco (First Generation) commonly rusts in floor pans, rockers, rear quarters and wheel housings, fender aprons, door bottoms and tailgates, and this replica pressing replaces corroded original metal with new steel — no donor vehicle required.\u003c\/p\u003e\u003ch3\u003eDo you ship this internationally?\u003c\/h3\u003e\u003cp\u003eYes. We ship worldwide with tracked freight; larger panels and assemblies travel in purpose-built crates. Delivery times and freight options for your country are shown at checkout and on our Shipping page.\u003c\/p\u003e\u003ch3\u003eWhat finish does the panel arrive in?\u003c\/h3\u003e\u003cp\u003eIt arrives ready for preparation and paint. Like any replacement body panel, it should be test-fitted, prepared and refinished before final installation.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eBodyBros is an independent manufacturer of replica restoration panels. Vehicle make and model names are used for fitment identification only; BodyBros products are aftermarket parts and BodyBros is not affiliated with or endorsed by Ford.\u003c\/em\u003e\u003c\/p\u003e\u003cp\u003e\u003cem\u003eExplore more: \u003ca href=\"\/collections\/ford-bronco-1966-77\"\u003eall Ford Bronco (First Generation) panels\u003c\/a\u003e · \u003ca href=\"\/collections\/panels-side-panels\"\u003equarter, corner \u0026amp; side panels\u003c\/a\u003e · \u003ca href=\"\/blogs\/knowledge\/choosing-reproduction-body-panels\"\u003ehow to choose reproduction panels\u003c\/a\u003e\u003c\/em\u003e\u003c\/p\u003e","brand":"BodyBros","offers":[{"title":"Default Title","offer_id":44126716985409,"sku":"SYC-FD44-20L","price":362.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/1468\/8321\/files\/SYC-FD44-20L_a96ab364-93dc-4bae-8de3-1168d70bc13f.jpg?v=1783303675"},{"product_id":"ford-bronco-1966-77-side-panel-rh","title":"Side Panel, RH – for Ford Bronco 1966–77 (Steel)","description":"\u003cp\u003eA direct-fit replica side panel for 1966–1977 Ford Bronco (First Generation) restorations, right-hand (RH) side. Stamped in steel to original-style contours so it lines up with existing seams, gaps and hardware locations — the fastest route from rust bucket to straight body without sacrificing a donor car.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFits\u003c\/th\u003e\n\u003ctd\u003eFord Bronco (First Generation)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eYears\u003c\/th\u003e\n\u003ctd\u003e1966–1977\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePanel type\u003c\/th\u003e\n\u003ctd\u003eQuarter, Corner \u0026amp; Side Panels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eSteel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSide\u003c\/th\u003e\n\u003ctd\u003eRI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSKU\u003c\/th\u003e\n\u003ctd\u003eSYC-FD44-20R\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eSupplied ready for prep and paint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eInstallation\u003c\/th\u003e\n\u003ctd\u003eAdvanced — approx. 4–10 hours per panel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWelding required\u003c\/th\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eThis panel fits the \u003cstrong\u003eFord Bronco (First Generation)\u003c\/strong\u003e, model years \u003cstrong\u003e1966–1977\u003c\/strong\u003e. Panels listed for 1966–1977 fit all first-generation Broncos unless noted; 1966–1968 trucks differ in some trim and grille details, and 'uncut' rear quarters restore the factory wheel-arch line on trucks whose arches were cut. Test-fit before paint, as with any reproduction panel.\u003c\/p\u003e\u003cp\u003eAs with any reproduction panel, trial-fit against the vehicle before final welding or paint. Minor adjustment at flanges and mounting points is a normal part of professional panel fitting, even with precision replica pressings.\u003c\/p\u003e\u003ch2\u003eSkip the rust bucket rescue\u003c\/h2\u003e\u003cp\u003eThe oldroute to a straight Ford Bronco (First Generation) body was buying a second parts vehicle and hoping its panel was better than yours. That gamble costs storage, freight and usually disappointment — donor panels carry the same decades of corrosion in the same places. New replica steel ends the cycle: predictable cost, predictable fit, and every panel of your actual vehicle preserved.\u003c\/p\u003e\u003ch2\u003eAbout the Ford Bronco (First Generation)\u003c\/h2\u003e\u003cp\u003eThe first-generation Ford Bronco, built from 1966 to 1977, has gone from farm truck to blue-chip collectible — early uncut Broncos now trade at prices that justify full body-off restorations. Ford built the early Bronco with a fully boxed frame and a simple welded steel body offered as a wagon, half-cab pickup and (briefly) roadster. Because so many Broncos had their rear quarters cut for larger tyres in the 1970s and 80s, straight original sheet metal is scarce, and complete reproduction bodies, cabs and individual stamped panels are now central to the Bronco restoration industry.\u003c\/p\u003e\u003cp\u003eEarly Broncos rust in the usual Ford truck places: floor pans front and rear, rocker panels, inner and outer rear quarters, wheel housings, fender aprons, door bottoms and the tailgate. The good news is that virtually every panel on a 1966–1977 Bronco is reproduced to a high standard, so builders can replace entire corroded assemblies — or start from a complete new body — rather than repairing pitted original steel.\u003c\/p\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eDifficulty:\u003c\/strong\u003e Advanced  |  \u003cstrong\u003eTypical time:\u003c\/strong\u003e 4–10 hours per panel  |  \u003cstrong\u003eWelding required:\u003c\/strong\u003e yes.\u003c\/p\u003e\u003cp\u003eQuarters and corners are cut-and-weld repairs. Map the factory seams first, cut the old panel back to sound metal, and hang the new pressing with clamps to check line-up against the tailgate, door and wheel arch before welding. Plug-weld at factory locations, work in short sequences to control heat, and dress the welds before priming. On the bench this is the most satisfying repair on the truck; rushed, it's the most visible mistake.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTools:\u003c\/strong\u003e spot-weld drill, MIG welder, panel clamps, hammer and dolly, seam sealer.\u003cbr\u003e\u003cstrong\u003eCommon mistakes to avoid:\u003c\/strong\u003e welding long continuous beads that warp the panel, ignoring the inner structure behind the quarter, and trusting the old panel's position when it was already sagging.\u003c\/p\u003e\u003cp\u003eIf you are not an experienced welder, we recommend professional installation for this panel — it is structural, and correct seam welding matters for both safety and finish.\u003c\/p\u003e\u003ch2\u003eQuality \u0026amp; Manufacturing\u003c\/h2\u003e\u003cp\u003eBodyBros replica panels are pressed on dedicated tooling developed from measured original panels, in automotive-grade material matched to the application. Pressings are checked against reference bucks for profile, flange geometry and hole placement before packing. Steel panels are supplied with a protective primer coating ready for preparation and refinishing; alloy and plastic parts are supplied ready to prepare and paint. These are aftermarket replica restoration parts — manufactured by BodyBros, not by the original vehicle maker.\u003c\/p\u003e\u003ch2\u003eWorldwide Delivery\u003c\/h2\u003e\u003cp\u003eWe ship worldwide — including the United States, Canada, the UK, Europe, Australia and New Zealand. Panels are packed in purpose-built cartons or timber crates depending on size; large assemblies travel by sea or air freight with tracking. Duties and taxes are calculated at checkout or on arrival depending on destination. See our \u003ca href=\"\/pages\/shipping\"\u003eShipping \u0026amp; Delivery\u003c\/a\u003e page for lead times to your region.\u003c\/p\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003ch3\u003eWill this panel fit my Ford Bronco (First Generation)?\u003c\/h3\u003e\u003cp\u003eIt fits 1966–1977 models as listed above. Panels listed for 1966–1977 fit all first-generation Broncos unless noted; 1966–1968 trucks differ in some trim and grille details, and 'uncut' rear quarters restore the factory wheel-arch line on trucks whose arches were cut. Test-fit before paint, as with any reproduction panel.\u003c\/p\u003e\u003ch3\u003eIs welding required to install it?\u003c\/h3\u003e\u003cp\u003eYes — this is a welded structural panel. It should be trial-fitted, clamped and plug-welded at the factory seam locations, ideally by an experienced welder.\u003c\/p\u003e\u003ch3\u003eCan it replace a rusted original panel?\u003c\/h3\u003e\u003cp\u003eYes — that is exactly what it is made for. The Ford Bronco (First Generation) commonly rusts in floor pans, rockers, rear quarters and wheel housings, fender aprons, door bottoms and tailgates, and this replica pressing replaces corroded original metal with new steel — no donor vehicle required.\u003c\/p\u003e\u003ch3\u003eDo you ship this internationally?\u003c\/h3\u003e\u003cp\u003eYes. We ship worldwide with tracked freight; larger panels and assemblies travel in purpose-built crates. Delivery times and freight options for your country are shown at checkout and on our Shipping page.\u003c\/p\u003e\u003ch3\u003eWhat finish does the panel arrive in?\u003c\/h3\u003e\u003cp\u003eIt arrives ready for preparation and paint. Like any replacement body panel, it should be test-fitted, prepared and refinished before final installation.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eBodyBros is an independent manufacturer of replica restoration panels. Vehicle make and model names are used for fitment identification only; BodyBros products are aftermarket parts and BodyBros is not affiliated with or endorsed by Ford.\u003c\/em\u003e\u003c\/p\u003e\u003cp\u003e\u003cem\u003eExplore more: \u003ca href=\"\/collections\/ford-bronco-1966-77\"\u003eall Ford Bronco (First Generation) panels\u003c\/a\u003e · \u003ca href=\"\/collections\/panels-side-panels\"\u003equarter, corner \u0026amp; side panels\u003c\/a\u003e · \u003ca href=\"\/blogs\/knowledge\/choosing-reproduction-body-panels\"\u003ehow to choose reproduction panels\u003c\/a\u003e\u003c\/em\u003e\u003c\/p\u003e","brand":"BodyBros","offers":[{"title":"Default Title","offer_id":44126717018177,"sku":"SYC-FD44-20R","price":362.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/1468\/8321\/files\/SYC-FD44-20R_4dff9777-cb1e-40cc-b683-fa7e4fefe471.jpg?v=1783303676"},{"product_id":"toyota-land-cruiser-fj45-rock-panel-pair-pair","title":"Rock Panel Pair (Pair) – for Toyota Land Cruiser FJ45 (Steel)","description":"\u003cp\u003eSave your restoration hours for the work that shows: this replica rock panel pair suits 1960–1984 Toyota Land Cruiser FJ45 builds, pair (both sides) side and replaces panels that would cost more in repair labour than they are worth. Manufactured in steel to match the original pressing, it fits the way the panel it replaces once did — without the rust, dents or filler.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFits\u003c\/th\u003e\n\u003ctd\u003eToyota Land Cruiser FJ45\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eYears\u003c\/th\u003e\n\u003ctd\u003e1960–1984\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePanel type\u003c\/th\u003e\n\u003ctd\u003eQuarter, Corner \u0026amp; Side Panels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eSteel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSide\u003c\/th\u003e\n\u003ctd\u003ePair\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSKU\u003c\/th\u003e\n\u003ctd\u003eSYC-TY65-25-1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eSupplied ready for prep and paint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eInstallation\u003c\/th\u003e\n\u003ctd\u003eAdvanced — approx. 4–10 hours per panel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWelding required\u003c\/th\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eThis panel fits the \u003cstrong\u003eToyota Land Cruiser FJ45\u003c\/strong\u003e, model years \u003cstrong\u003e1960–1984\u003c\/strong\u003e. FJ45 cab panels differ from FJ40 items behind the doors — always confirm whether a panel is 40-specific, 45-specific or shared across the 40-Series before ordering. Bed and back-panel parts are FJ45-only. Match your build year, as pressings changed across the long production run.\u003c\/p\u003e\u003cp\u003eAs with any reproduction panel, trial-fit against the vehicle before final welding or paint. Minor adjustment at flanges and mounting points is a normal part of professional panel fitting, even with precision replica pressings.\u003c\/p\u003e\u003ch2\u003eWhy replace instead of repair\u003c\/h2\u003e\u003cp\u003eEvery hour spent cutting corrosion out of an original panel is an hour not spent finishing the vehicle — and rust repair is the most open-ended line in any restoration budget. A new replica panel gives you a fixed cost, a known timeline and straight steel from day one. No hunting classifieds for a donor FJ45, no cutting up a survivor for one usable panel, no discovering that the ‘solid’ second-hand panel you shipped across the country rusted the same way yours did.\u003c\/p\u003e\u003ch2\u003eAbout the Toyota Land Cruiser FJ45\u003c\/h2\u003e\u003cp\u003eThe Toyota Land Cruiser FJ45 is the long-wheelbase, load-carrying member of the 40-Series family, built from 1960 through the mid-1980s as a pickup, cab-chassis and troop-carrier. It shares its front clip, windscreen frame and much of its cab structure with the FJ40, but adds a longer frame, a dedicated steel truck bed and unique rear cab panels. FJ45s worked even harder than their short-wheelbase brothers — most spent their lives on farms and stations — so straight, rust-free original examples are now genuinely rare, and values for well-restored trucks have climbed sharply.\u003c\/p\u003e\u003cp\u003eThe FJ45's trouble spots mirror the FJ40's, with the addition of the truck bed itself: bed floors, bed fenders, tailgates and the lower back panel of the cab all trap moisture and rot from the inside out. Reproduction cab and bed panels stamped to the original profiles let restorers replace entire corroded structures instead of forming patch sections by hand.\u003c\/p\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eDifficulty:\u003c\/strong\u003e Advanced  |  \u003cstrong\u003eTypical time:\u003c\/strong\u003e 4–10 hours per panel  |  \u003cstrong\u003eWelding required:\u003c\/strong\u003e yes.\u003c\/p\u003e\u003cp\u003eQuarters and corners are cut-and-weld repairs. Map the factory seams first, cut the old panel back to sound metal, and hang the new pressing with clamps to check line-up against the tailgate, door and wheel arch before welding. Plug-weld at factory locations, work in short sequences to control heat, and dress the welds before priming. On the bench this is the most satisfying repair on the truck; rushed, it's the most visible mistake.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTools:\u003c\/strong\u003e spot-weld drill, MIG welder, panel clamps, hammer and dolly, seam sealer.\u003cbr\u003e\u003cstrong\u003eCommon mistakes to avoid:\u003c\/strong\u003e welding long continuous beads that warp the panel, ignoring the inner structure behind the quarter, and trusting the old panel's position when it was already sagging.\u003c\/p\u003e\u003cp\u003eIf you are not an experienced welder, we recommend professional installation for this panel — it is structural, and correct seam welding matters for both safety and finish.\u003c\/p\u003e\u003ch2\u003eQuality \u0026amp; Manufacturing\u003c\/h2\u003e\u003cp\u003eBodyBros replica panels are pressed on dedicated tooling developed from measured original panels, in automotive-grade material matched to the application. Pressings are checked against reference bucks for profile, flange geometry and hole placement before packing. Steel panels are supplied with a protective primer coating ready for preparation and refinishing; alloy and plastic parts are supplied ready to prepare and paint. These are aftermarket replica restoration parts — manufactured by BodyBros, not by the original vehicle maker.\u003c\/p\u003e\u003ch2\u003eWorldwide Delivery\u003c\/h2\u003e\u003cp\u003eWe ship worldwide — including the United States, Canada, the UK, Europe, Australia and New Zealand. Panels are packed in purpose-built cartons or timber crates depending on size; large assemblies travel by sea or air freight with tracking. Duties and taxes are calculated at checkout or on arrival depending on destination. See our \u003ca href=\"\/pages\/shipping\"\u003eShipping \u0026amp; Delivery\u003c\/a\u003e page for lead times to your region.\u003c\/p\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003ch3\u003eWill this panel fit my Toyota Land Cruiser FJ45?\u003c\/h3\u003e\u003cp\u003eIt fits 1960–1984 models as listed above. FJ45 cab panels differ from FJ40 items behind the doors — always confirm whether a panel is 40-specific, 45-specific or shared across the 40-Series before ordering. Bed and back-panel parts are FJ45-only. Match your build year, as pressings changed across the long production run.\u003c\/p\u003e\u003ch3\u003eIs welding required to install it?\u003c\/h3\u003e\u003cp\u003eYes — this is a welded structural panel. It should be trial-fitted, clamped and plug-welded at the factory seam locations, ideally by an experienced welder.\u003c\/p\u003e\u003ch3\u003eCan it replace a rusted original panel?\u003c\/h3\u003e\u003cp\u003eYes — that is exactly what it is made for. The Toyota Land Cruiser FJ45 commonly rusts in the cab back panel, bed floor and bed fenders, tailgate, sills, floors and lower corners, and this replica pressing replaces corroded original metal with new steel — no donor vehicle required.\u003c\/p\u003e\u003ch3\u003eDo you ship this internationally?\u003c\/h3\u003e\u003cp\u003eYes. We ship worldwide with tracked freight; larger panels and assemblies travel in purpose-built crates. Delivery times and freight options for your country are shown at checkout and on our Shipping page.\u003c\/p\u003e\u003ch3\u003eWhat finish does the panel arrive in?\u003c\/h3\u003e\u003cp\u003eIt arrives ready for preparation and paint. Like any replacement body panel, it should be test-fitted, prepared and refinished before final installation.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eBodyBros is an independent manufacturer of replica restoration panels. Vehicle make and model names are used for fitment identification only; BodyBros products are aftermarket parts and BodyBros is not affiliated with or endorsed by Toyota.\u003c\/em\u003e\u003c\/p\u003e\u003cp\u003e\u003cem\u003eExplore more: \u003ca href=\"\/collections\/toyota-land-cruiser-fj45\"\u003eall Toyota Land Cruiser FJ45 panels\u003c\/a\u003e · \u003ca href=\"\/collections\/panels-side-panels\"\u003equarter, corner \u0026amp; side panels\u003c\/a\u003e · \u003ca href=\"\/blogs\/knowledge\/choosing-reproduction-body-panels\"\u003ehow to choose reproduction panels\u003c\/a\u003e\u003c\/em\u003e\u003c\/p\u003e","brand":"BodyBros","offers":[{"title":"Default Title","offer_id":44126717313089,"sku":"SYC-TY65-25-1","price":119.71,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/1468\/8321\/files\/SYC-TY65-25-1_2e14d05f-a43c-4f76-a415-f5d949ca6302.jpg?v=1783303684"},{"product_id":"land-rover-defender-110-side-panel-frame-lh","title":"Side Panel Frame, LH (Td4) – for Land Rover Defender 110 (Aluminium)","description":"\u003cp\u003eThis side panel frame is a precision replica panel made to suit the Land Rover Defender (1983–2016), pressed in aluminium to the original-style profile for the left-hand (LH) side. Instead of spending weekends cutting rust out of fifty-year-old steel — or hunting down a donor vehicle for one usable panel — you start with straight, new metal that is ready for preparation and paint.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFits\u003c\/th\u003e\n\u003ctd\u003eLand Rover Defender\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eYears\u003c\/th\u003e\n\u003ctd\u003e1983–2016\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePanel type\u003c\/th\u003e\n\u003ctd\u003eQuarter, Corner \u0026amp; Side Panels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSide\u003c\/th\u003e\n\u003ctd\u003eLE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eEngine era\u003c\/th\u003e\n\u003ctd\u003eTd4\/Puma (2007–2016)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSKU\u003c\/th\u003e\n\u003ctd\u003eSYC-LR01-20L(110)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eSupplied ready for prep and paint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eInstallation\u003c\/th\u003e\n\u003ctd\u003eAdvanced — approx. 4–10 hours per panel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWelding required\u003c\/th\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eThis panel fits the \u003cstrong\u003eLand Rover Defender\u003c\/strong\u003e, model years \u003cstrong\u003e1983–2016\u003c\/strong\u003e, Td4\/Puma (2007–2016) era. Defender 90 and 110 share most front-end and bulkhead panels; rear body, floor, sill and roof parts are usually wheelbase-specific. Always match the panel to your era — Tdi (1990–1998), Td5 (1998–2007) or Td4\/Puma (2007–2016) — and to 90 or 110 as listed. Left- and right-hand-drive matter for bulkhead, dash and some fittings.\u003c\/p\u003e\u003cp\u003eAs with any reproduction panel, trial-fit against the vehicle before final welding or paint. Minor adjustment at flanges and mounting points is a normal part of professional panel fitting, even with precision replica pressings.\u003c\/p\u003e\u003ch2\u003eThe maths of new steel\u003c\/h2\u003e\u003cp\u003eRestorers rarely regret buying a new panel; they regret the three weekends spent trying to save an old one first. Repairing a corroded panel means paying for blasting, fabrication time and filler — and the result is still fifty-year-old metal. A replica pressing costs a known amount, arrives straight, and spares a donor vehicle from being cut up for parts. Your original panel can stay with the vehicle for provenance; your build gets metal you can trust.\u003c\/p\u003e\u003ch2\u003eAbout the Land Rover Defender\u003c\/h2\u003e\u003cp\u003eThe Land Rover Defender — and the One Ten \/ Ninety models that preceded the name — was built in Solihull from 1983 to 2016 on a body architecture Land Rover kept deliberately simple: aluminium alloy outer panels (Birmabright-derived alloys) hung on a steel bulkhead, steel door frames and a steel ladder chassis. That mix is the Defender's blessing and its curse. The alloy skins shrug off surface rust, but the steel structure beneath — bulkhead, door frames, B- and C-pillars, crossmembers and the boot floor supports — corrodes aggressively, and galvanic reaction where alloy meets steel eats panels from the joint outward.\u003c\/p\u003e\u003cp\u003eDefenders span three main mechanical eras that matter for body parts: the coil-sprung Tdi era (200Tdi\/300Tdi, 1990–1998), the Td5 era (1998–2007) and the Puma\/Td4 era (2007–2016). Body details — dash and bulkhead pressings, fender tops, door construction, seat boxes and floor assemblies — changed at each step, so Defender panels are usually listed as Tdi, Td5 or Td4\/Puma specific. With production ended and Land Rover Classic parts pricing climbing, quality reproduction panels have become the standard way to keep working Defenders and restoration builds on the road.\u003c\/p\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eDifficulty:\u003c\/strong\u003e Advanced  |  \u003cstrong\u003eTypical time:\u003c\/strong\u003e 4–10 hours per panel  |  \u003cstrong\u003eWelding required:\u003c\/strong\u003e yes.\u003c\/p\u003e\u003cp\u003eQuarters and corners are cut-and-weld repairs. Map the factory seams first, cut the old panel back to sound metal, and hang the new pressing with clamps to check line-up against the tailgate, door and wheel arch before welding. Plug-weld at factory locations, work in short sequences to control heat, and dress the welds before priming. On the bench this is the most satisfying repair on the truck; rushed, it's the most visible mistake.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTools:\u003c\/strong\u003e spot-weld drill, MIG welder, panel clamps, hammer and dolly, seam sealer.\u003cbr\u003e\u003cstrong\u003eCommon mistakes to avoid:\u003c\/strong\u003e welding long continuous beads that warp the panel, ignoring the inner structure behind the quarter, and trusting the old panel's position when it was already sagging.\u003c\/p\u003e\u003cp\u003eIf you are not an experienced welder, we recommend professional installation for this panel — it is structural, and correct seam welding matters for both safety and finish.\u003c\/p\u003e\u003ch2\u003eQuality \u0026amp; Manufacturing\u003c\/h2\u003e\u003cp\u003eBodyBros replica panels are pressed on dedicated tooling developed from measured original panels, in automotive-grade material matched to the application. Pressings are checked against reference bucks for profile, flange geometry and hole placement before packing. Steel panels are supplied with a protective primer coating ready for preparation and refinishing; alloy and plastic parts are supplied ready to prepare and paint. These are aftermarket replica restoration parts — manufactured by BodyBros, not by the original vehicle maker.\u003c\/p\u003e\u003ch2\u003eWorldwide Delivery\u003c\/h2\u003e\u003cp\u003eWe ship worldwide — including the United States, Canada, the UK, Europe, Australia and New Zealand. Panels are packed in purpose-built cartons or timber crates depending on size; large assemblies travel by sea or air freight with tracking. Duties and taxes are calculated at checkout or on arrival depending on destination. See our \u003ca href=\"\/pages\/shipping\"\u003eShipping \u0026amp; Delivery\u003c\/a\u003e page for lead times to your region.\u003c\/p\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003ch3\u003eWill this panel fit my Land Rover Defender?\u003c\/h3\u003e\u003cp\u003eIt fits 1983–2016 models as listed above. Defender 90 and 110 share most front-end and bulkhead panels; rear body, floor, sill and roof parts are usually wheelbase-specific. Always match the panel to your era — Tdi (1990–1998), Td5 (1998–2007) or Td4\/Puma (2007–2016) — and to 90 or 110 as listed. Left- and right-hand-drive matter for bulkhead, dash and some fittings.\u003c\/p\u003e\u003ch3\u003eIs welding required to install it?\u003c\/h3\u003e\u003cp\u003eYes — this is a welded structural panel. It should be trial-fitted, clamped and plug-welded at the factory seam locations, ideally by an experienced welder.\u003c\/p\u003e\u003ch3\u003eCan it replace a rusted original panel?\u003c\/h3\u003e\u003cp\u003eYes — that is exactly what it is made for. The Land Rover Defender commonly rusts in the steel bulkhead and footwells, door frames and bottoms, B\/C-pillars, rear crossmember, seat box and floor supports — plus galvanic corrosion wherever alloy panels meet steel, and this replica pressing replaces corroded original metal with new aluminium — no donor vehicle required.\u003c\/p\u003e\u003ch3\u003eDo you ship this internationally?\u003c\/h3\u003e\u003cp\u003eYes. We ship worldwide with tracked freight; larger panels and assemblies travel in purpose-built crates. Delivery times and freight options for your country are shown at checkout and on our Shipping page.\u003c\/p\u003e\u003ch3\u003eWhat finish does the panel arrive in?\u003c\/h3\u003e\u003cp\u003eIt arrives ready for preparation and paint. Like any replacement body panel, it should be test-fitted, prepared and refinished before final installation.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eBodyBros is an independent manufacturer of replica restoration panels. Vehicle make and model names are used for fitment identification only; BodyBros products are aftermarket parts and BodyBros is not affiliated with or endorsed by Land Rover (Jaguar Land Rover).\u003c\/em\u003e\u003c\/p\u003e\u003cp\u003e\u003cem\u003eExplore more: \u003ca href=\"\/collections\/land-rover-defender\"\u003eall Land Rover Defender panels\u003c\/a\u003e · \u003ca href=\"\/collections\/panels-side-panels\"\u003equarter, corner \u0026amp; side panels\u003c\/a\u003e · \u003ca href=\"\/blogs\/knowledge\/choosing-reproduction-body-panels\"\u003ehow to choose reproduction panels\u003c\/a\u003e\u003c\/em\u003e\u003c\/p\u003e","brand":"BodyBros","offers":[{"title":"Default Title","offer_id":44126717608001,"sku":"SYC-LR01-20L(110)","price":556.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/1468\/8321\/files\/SY-LR01-20L_110_-001_0448ea80-c8c6-4216-b4d0-9c3d501dd34c.jpg?v=1783303693"},{"product_id":"land-rover-defender-90-side-panel-frame-lh","title":"Side Panel Frame, LH – for Land Rover Defender 90 (Aluminium)","description":"\u003cp\u003eThis side panel frame is a precision replica panel made to suit the Land Rover Defender (1983–2016), pressed in aluminium to the original-style profile for the left-hand (LH) side. Instead of spending weekends cutting rust out of fifty-year-old steel — or hunting down a donor vehicle for one usable panel — you start with straight, new metal that is ready for preparation and paint.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFits\u003c\/th\u003e\n\u003ctd\u003eLand Rover Defender\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eYears\u003c\/th\u003e\n\u003ctd\u003e1983–2016\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePanel type\u003c\/th\u003e\n\u003ctd\u003eQuarter, Corner \u0026amp; Side Panels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSide\u003c\/th\u003e\n\u003ctd\u003eLE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSKU\u003c\/th\u003e\n\u003ctd\u003eSYC-LR01-20L(90）\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eSupplied ready for prep and paint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eInstallation\u003c\/th\u003e\n\u003ctd\u003eAdvanced — approx. 4–10 hours per panel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWelding required\u003c\/th\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eThis panel fits the \u003cstrong\u003eLand Rover Defender\u003c\/strong\u003e, model years \u003cstrong\u003e1983–2016\u003c\/strong\u003e. Defender 90 and 110 share most front-end and bulkhead panels; rear body, floor, sill and roof parts are usually wheelbase-specific. Always match the panel to your era — Tdi (1990–1998), Td5 (1998–2007) or Td4\/Puma (2007–2016) — and to 90 or 110 as listed. Left- and right-hand-drive matter for bulkhead, dash and some fittings.\u003c\/p\u003e\u003cp\u003eAs with any reproduction panel, trial-fit against the vehicle before final welding or paint. Minor adjustment at flanges and mounting points is a normal part of professional panel fitting, even with precision replica pressings.\u003c\/p\u003e\u003ch2\u003eThe maths of new steel\u003c\/h2\u003e\u003cp\u003eRestorers rarely regret buying a new panel; they regret the three weekends spent trying to save an old one first. Repairing a corroded panel means paying for blasting, fabrication time and filler — and the result is still fifty-year-old metal. A replica pressing costs a known amount, arrives straight, and spares a donor vehicle from being cut up for parts. Your original panel can stay with the vehicle for provenance; your build gets metal you can trust.\u003c\/p\u003e\u003ch2\u003eAbout the Land Rover Defender\u003c\/h2\u003e\u003cp\u003eThe Land Rover Defender — and the One Ten \/ Ninety models that preceded the name — was built in Solihull from 1983 to 2016 on a body architecture Land Rover kept deliberately simple: aluminium alloy outer panels (Birmabright-derived alloys) hung on a steel bulkhead, steel door frames and a steel ladder chassis. That mix is the Defender's blessing and its curse. The alloy skins shrug off surface rust, but the steel structure beneath — bulkhead, door frames, B- and C-pillars, crossmembers and the boot floor supports — corrodes aggressively, and galvanic reaction where alloy meets steel eats panels from the joint outward.\u003c\/p\u003e\u003cp\u003eDefenders span three main mechanical eras that matter for body parts: the coil-sprung Tdi era (200Tdi\/300Tdi, 1990–1998), the Td5 era (1998–2007) and the Puma\/Td4 era (2007–2016). Body details — dash and bulkhead pressings, fender tops, door construction, seat boxes and floor assemblies — changed at each step, so Defender panels are usually listed as Tdi, Td5 or Td4\/Puma specific. With production ended and Land Rover Classic parts pricing climbing, quality reproduction panels have become the standard way to keep working Defenders and restoration builds on the road.\u003c\/p\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eDifficulty:\u003c\/strong\u003e Advanced  |  \u003cstrong\u003eTypical time:\u003c\/strong\u003e 4–10 hours per panel  |  \u003cstrong\u003eWelding required:\u003c\/strong\u003e yes.\u003c\/p\u003e\u003cp\u003eQuarters and corners are cut-and-weld repairs. Map the factory seams first, cut the old panel back to sound metal, and hang the new pressing with clamps to check line-up against the tailgate, door and wheel arch before welding. Plug-weld at factory locations, work in short sequences to control heat, and dress the welds before priming. On the bench this is the most satisfying repair on the truck; rushed, it's the most visible mistake.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTools:\u003c\/strong\u003e spot-weld drill, MIG welder, panel clamps, hammer and dolly, seam sealer.\u003cbr\u003e\u003cstrong\u003eCommon mistakes to avoid:\u003c\/strong\u003e welding long continuous beads that warp the panel, ignoring the inner structure behind the quarter, and trusting the old panel's position when it was already sagging.\u003c\/p\u003e\u003cp\u003eIf you are not an experienced welder, we recommend professional installation for this panel — it is structural, and correct seam welding matters for both safety and finish.\u003c\/p\u003e\u003ch2\u003eQuality \u0026amp; Manufacturing\u003c\/h2\u003e\u003cp\u003eBodyBros replica panels are pressed on dedicated tooling developed from measured original panels, in automotive-grade material matched to the application. Pressings are checked against reference bucks for profile, flange geometry and hole placement before packing. Steel panels are supplied with a protective primer coating ready for preparation and refinishing; alloy and plastic parts are supplied ready to prepare and paint. These are aftermarket replica restoration parts — manufactured by BodyBros, not by the original vehicle maker.\u003c\/p\u003e\u003ch2\u003eWorldwide Delivery\u003c\/h2\u003e\u003cp\u003eWe ship worldwide — including the United States, Canada, the UK, Europe, Australia and New Zealand. Panels are packed in purpose-built cartons or timber crates depending on size; large assemblies travel by sea or air freight with tracking. Duties and taxes are calculated at checkout or on arrival depending on destination. See our \u003ca href=\"\/pages\/shipping\"\u003eShipping \u0026amp; Delivery\u003c\/a\u003e page for lead times to your region.\u003c\/p\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003ch3\u003eWill this panel fit my Land Rover Defender?\u003c\/h3\u003e\u003cp\u003eIt fits 1983–2016 models as listed above. Defender 90 and 110 share most front-end and bulkhead panels; rear body, floor, sill and roof parts are usually wheelbase-specific. Always match the panel to your era — Tdi (1990–1998), Td5 (1998–2007) or Td4\/Puma (2007–2016) — and to 90 or 110 as listed. Left- and right-hand-drive matter for bulkhead, dash and some fittings.\u003c\/p\u003e\u003ch3\u003eIs welding required to install it?\u003c\/h3\u003e\u003cp\u003eYes — this is a welded structural panel. It should be trial-fitted, clamped and plug-welded at the factory seam locations, ideally by an experienced welder.\u003c\/p\u003e\u003ch3\u003eCan it replace a rusted original panel?\u003c\/h3\u003e\u003cp\u003eYes — that is exactly what it is made for. The Land Rover Defender commonly rusts in the steel bulkhead and footwells, door frames and bottoms, B\/C-pillars, rear crossmember, seat box and floor supports — plus galvanic corrosion wherever alloy panels meet steel, and this replica pressing replaces corroded original metal with new aluminium — no donor vehicle required.\u003c\/p\u003e\u003ch3\u003eDo you ship this internationally?\u003c\/h3\u003e\u003cp\u003eYes. We ship worldwide with tracked freight; larger panels and assemblies travel in purpose-built crates. Delivery times and freight options for your country are shown at checkout and on our Shipping page.\u003c\/p\u003e\u003ch3\u003eWhat finish does the panel arrive in?\u003c\/h3\u003e\u003cp\u003eIt arrives ready for preparation and paint. Like any replacement body panel, it should be test-fitted, prepared and refinished before final installation.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eBodyBros is an independent manufacturer of replica restoration panels. Vehicle make and model names are used for fitment identification only; BodyBros products are aftermarket parts and BodyBros is not affiliated with or endorsed by Land Rover (Jaguar Land Rover).\u003c\/em\u003e\u003c\/p\u003e\u003cp\u003e\u003cem\u003eExplore more: \u003ca href=\"\/collections\/land-rover-defender\"\u003eall Land Rover Defender panels\u003c\/a\u003e · \u003ca href=\"\/collections\/panels-side-panels\"\u003equarter, corner \u0026amp; side panels\u003c\/a\u003e · \u003ca href=\"\/blogs\/knowledge\/choosing-reproduction-body-panels\"\u003ehow to choose reproduction panels\u003c\/a\u003e\u003c\/em\u003e\u003c\/p\u003e","brand":"BodyBros","offers":[{"title":"Default Title","offer_id":44126717640769,"sku":"SYC-LR01-20L(90）","price":556.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/1468\/8321\/files\/SYC-LR01-20L_90_564da80f-2516-4ef0-a9d4-025aea4d93e8.jpg?v=1783303694"},{"product_id":"land-rover-defender-110-side-panel-frame-lh-aluminium","title":"Side Panel Frame, LH (Td4) (without Window Aperture) – for Land Rover Defender 110 (Aluminium)","description":"\u003cp\u003eSave your restoration hours for the work that shows: this replica side panel frame suits 1983–2016 Land Rover Defender builds, left-hand (LH) side and replaces panels that would cost more in repair labour than they are worth. Manufactured in aluminium to match the original pressing, it fits the way the panel it replaces once did — without the rust, dents or filler.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFits\u003c\/th\u003e\n\u003ctd\u003eLand Rover Defender\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eYears\u003c\/th\u003e\n\u003ctd\u003e1983–2016\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePanel type\u003c\/th\u003e\n\u003ctd\u003eQuarter, Corner \u0026amp; Side Panels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSide\u003c\/th\u003e\n\u003ctd\u003eLE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eEngine era\u003c\/th\u003e\n\u003ctd\u003eTd4\/Puma (2007–2016)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSKU\u003c\/th\u003e\n\u003ctd\u003eSYC-LR01-20L(110) W\/0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eSupplied ready for prep and paint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eInstallation\u003c\/th\u003e\n\u003ctd\u003eAdvanced — approx. 4–10 hours per panel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWelding required\u003c\/th\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eThis panel fits the \u003cstrong\u003eLand Rover Defender\u003c\/strong\u003e, model years \u003cstrong\u003e1983–2016\u003c\/strong\u003e, Td4\/Puma (2007–2016) era. Defender 90 and 110 share most front-end and bulkhead panels; rear body, floor, sill and roof parts are usually wheelbase-specific. Always match the panel to your era — Tdi (1990–1998), Td5 (1998–2007) or Td4\/Puma (2007–2016) — and to 90 or 110 as listed. Left- and right-hand-drive matter for bulkhead, dash and some fittings.\u003c\/p\u003e\u003cp\u003eAs with any reproduction panel, trial-fit against the vehicle before final welding or paint. Minor adjustment at flanges and mounting points is a normal part of professional panel fitting, even with precision replica pressings.\u003c\/p\u003e\u003ch2\u003eWhy replace instead of repair\u003c\/h2\u003e\u003cp\u003eEvery hour spent cutting corrosion out of an original panel is an hour not spent finishing the vehicle — and rust repair is the most open-ended line in any restoration budget. A new replica panel gives you a fixed cost, a known timeline and straight aluminium from day one. No hunting classifieds for a donor Defender, no cutting up a survivor for one usable panel, no discovering that the ‘solid’ second-hand panel you shipped across the country rusted the same way yours did.\u003c\/p\u003e\u003ch2\u003eAbout the Land Rover Defender\u003c\/h2\u003e\u003cp\u003eThe Land Rover Defender — and the One Ten \/ Ninety models that preceded the name — was built in Solihull from 1983 to 2016 on a body architecture Land Rover kept deliberately simple: aluminium alloy outer panels (Birmabright-derived alloys) hung on a steel bulkhead, steel door frames and a steel ladder chassis. That mix is the Defender's blessing and its curse. The alloy skins shrug off surface rust, but the steel structure beneath — bulkhead, door frames, B- and C-pillars, crossmembers and the boot floor supports — corrodes aggressively, and galvanic reaction where alloy meets steel eats panels from the joint outward.\u003c\/p\u003e\u003cp\u003eDefenders span three main mechanical eras that matter for body parts: the coil-sprung Tdi era (200Tdi\/300Tdi, 1990–1998), the Td5 era (1998–2007) and the Puma\/Td4 era (2007–2016). Body details — dash and bulkhead pressings, fender tops, door construction, seat boxes and floor assemblies — changed at each step, so Defender panels are usually listed as Tdi, Td5 or Td4\/Puma specific. With production ended and Land Rover Classic parts pricing climbing, quality reproduction panels have become the standard way to keep working Defenders and restoration builds on the road.\u003c\/p\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eDifficulty:\u003c\/strong\u003e Advanced  |  \u003cstrong\u003eTypical time:\u003c\/strong\u003e 4–10 hours per panel  |  \u003cstrong\u003eWelding required:\u003c\/strong\u003e yes.\u003c\/p\u003e\u003cp\u003eQuarters and corners are cut-and-weld repairs. Map the factory seams first, cut the old panel back to sound metal, and hang the new pressing with clamps to check line-up against the tailgate, door and wheel arch before welding. Plug-weld at factory locations, work in short sequences to control heat, and dress the welds before priming. On the bench this is the most satisfying repair on the truck; rushed, it's the most visible mistake.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTools:\u003c\/strong\u003e spot-weld drill, MIG welder, panel clamps, hammer and dolly, seam sealer.\u003cbr\u003e\u003cstrong\u003eCommon mistakes to avoid:\u003c\/strong\u003e welding long continuous beads that warp the panel, ignoring the inner structure behind the quarter, and trusting the old panel's position when it was already sagging.\u003c\/p\u003e\u003cp\u003eIf you are not an experienced welder, we recommend professional installation for this panel — it is structural, and correct seam welding matters for both safety and finish.\u003c\/p\u003e\u003ch2\u003eQuality \u0026amp; Manufacturing\u003c\/h2\u003e\u003cp\u003eBodyBros replica panels are pressed on dedicated tooling developed from measured original panels, in automotive-grade material matched to the application. Pressings are checked against reference bucks for profile, flange geometry and hole placement before packing. Steel panels are supplied with a protective primer coating ready for preparation and refinishing; alloy and plastic parts are supplied ready to prepare and paint. These are aftermarket replica restoration parts — manufactured by BodyBros, not by the original vehicle maker.\u003c\/p\u003e\u003ch2\u003eWorldwide Delivery\u003c\/h2\u003e\u003cp\u003eWe ship worldwide — including the United States, Canada, the UK, Europe, Australia and New Zealand. Panels are packed in purpose-built cartons or timber crates depending on size; large assemblies travel by sea or air freight with tracking. Duties and taxes are calculated at checkout or on arrival depending on destination. See our \u003ca href=\"\/pages\/shipping\"\u003eShipping \u0026amp; Delivery\u003c\/a\u003e page for lead times to your region.\u003c\/p\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003ch3\u003eWill this panel fit my Land Rover Defender?\u003c\/h3\u003e\u003cp\u003eIt fits 1983–2016 models as listed above. Defender 90 and 110 share most front-end and bulkhead panels; rear body, floor, sill and roof parts are usually wheelbase-specific. Always match the panel to your era — Tdi (1990–1998), Td5 (1998–2007) or Td4\/Puma (2007–2016) — and to 90 or 110 as listed. Left- and right-hand-drive matter for bulkhead, dash and some fittings.\u003c\/p\u003e\u003ch3\u003eIs welding required to install it?\u003c\/h3\u003e\u003cp\u003eYes — this is a welded structural panel. It should be trial-fitted, clamped and plug-welded at the factory seam locations, ideally by an experienced welder.\u003c\/p\u003e\u003ch3\u003eCan it replace a rusted original panel?\u003c\/h3\u003e\u003cp\u003eYes — that is exactly what it is made for. The Land Rover Defender commonly rusts in the steel bulkhead and footwells, door frames and bottoms, B\/C-pillars, rear crossmember, seat box and floor supports — plus galvanic corrosion wherever alloy panels meet steel, and this replica pressing replaces corroded original metal with new aluminium — no donor vehicle required.\u003c\/p\u003e\u003ch3\u003eDo you ship this internationally?\u003c\/h3\u003e\u003cp\u003eYes. We ship worldwide with tracked freight; larger panels and assemblies travel in purpose-built crates. Delivery times and freight options for your country are shown at checkout and on our Shipping page.\u003c\/p\u003e\u003ch3\u003eWhat finish does the panel arrive in?\u003c\/h3\u003e\u003cp\u003eIt arrives ready for preparation and paint. Like any replacement body panel, it should be test-fitted, prepared and refinished before final installation.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eBodyBros is an independent manufacturer of replica restoration panels. Vehicle make and model names are used for fitment identification only; BodyBros products are aftermarket parts and BodyBros is not affiliated with or endorsed by Land Rover (Jaguar Land Rover).\u003c\/em\u003e\u003c\/p\u003e\u003cp\u003e\u003cem\u003eExplore more: \u003ca href=\"\/collections\/land-rover-defender\"\u003eall Land Rover Defender panels\u003c\/a\u003e · \u003ca href=\"\/collections\/panels-side-panels\"\u003equarter, corner \u0026amp; side panels\u003c\/a\u003e · \u003ca href=\"\/blogs\/knowledge\/choosing-reproduction-body-panels\"\u003ehow to choose reproduction panels\u003c\/a\u003e\u003c\/em\u003e\u003c\/p\u003e","brand":"BodyBros","offers":[{"title":"Default Title","offer_id":44126717706305,"sku":"SYC-LR01-20L(110) W\/0","price":417.58,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/1468\/8321\/files\/SYC-LR01-20L_110_W-O-002_4aca07eb-a4d5-4176-95af-7055687e1757.jpg?v=1783303695"},{"product_id":"land-rover-defender-90-side-panel-frame-lh-aluminium","title":"Side Panel Frame, LH (without Window Aperture) – for Land Rover Defender 90 (Aluminium)","description":"\u003cp\u003eThis side panel frame is a precision replica panel made to suit the Land Rover Defender (1983–2016), pressed in aluminium to the original-style profile for the left-hand (LH) side. Instead of spending weekends cutting rust out of fifty-year-old steel — or hunting down a donor vehicle for one usable panel — you start with straight, new metal that is ready for preparation and paint.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFits\u003c\/th\u003e\n\u003ctd\u003eLand Rover Defender\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eYears\u003c\/th\u003e\n\u003ctd\u003e1983–2016\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePanel type\u003c\/th\u003e\n\u003ctd\u003eQuarter, Corner \u0026amp; Side Panels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSide\u003c\/th\u003e\n\u003ctd\u003eLE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSKU\u003c\/th\u003e\n\u003ctd\u003eSYC-LR01-20L(90) W\/0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eSupplied ready for prep and paint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eInstallation\u003c\/th\u003e\n\u003ctd\u003eAdvanced — approx. 4–10 hours per panel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWelding required\u003c\/th\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eThis panel fits the \u003cstrong\u003eLand Rover Defender\u003c\/strong\u003e, model years \u003cstrong\u003e1983–2016\u003c\/strong\u003e. Defender 90 and 110 share most front-end and bulkhead panels; rear body, floor, sill and roof parts are usually wheelbase-specific. Always match the panel to your era — Tdi (1990–1998), Td5 (1998–2007) or Td4\/Puma (2007–2016) — and to 90 or 110 as listed. Left- and right-hand-drive matter for bulkhead, dash and some fittings.\u003c\/p\u003e\u003cp\u003eAs with any reproduction panel, trial-fit against the vehicle before final welding or paint. Minor adjustment at flanges and mounting points is a normal part of professional panel fitting, even with precision replica pressings.\u003c\/p\u003e\u003ch2\u003eSkip the rust bucket rescue\u003c\/h2\u003e\u003cp\u003eThe oldroute to a straight Land Rover Defender body was buying a second parts vehicle and hoping its panel was better than yours. That gamble costs storage, freight and usually disappointment — donor panels carry the same decades of corrosion in the same places. New replica steel ends the cycle: predictable cost, predictable fit, and every panel of your actual vehicle preserved.\u003c\/p\u003e\u003ch2\u003eAbout the Land Rover Defender\u003c\/h2\u003e\u003cp\u003eThe Land Rover Defender — and the One Ten \/ Ninety models that preceded the name — was built in Solihull from 1983 to 2016 on a body architecture Land Rover kept deliberately simple: aluminium alloy outer panels (Birmabright-derived alloys) hung on a steel bulkhead, steel door frames and a steel ladder chassis. That mix is the Defender's blessing and its curse. The alloy skins shrug off surface rust, but the steel structure beneath — bulkhead, door frames, B- and C-pillars, crossmembers and the boot floor supports — corrodes aggressively, and galvanic reaction where alloy meets steel eats panels from the joint outward.\u003c\/p\u003e\u003cp\u003eDefenders span three main mechanical eras that matter for body parts: the coil-sprung Tdi era (200Tdi\/300Tdi, 1990–1998), the Td5 era (1998–2007) and the Puma\/Td4 era (2007–2016). Body details — dash and bulkhead pressings, fender tops, door construction, seat boxes and floor assemblies — changed at each step, so Defender panels are usually listed as Tdi, Td5 or Td4\/Puma specific. With production ended and Land Rover Classic parts pricing climbing, quality reproduction panels have become the standard way to keep working Defenders and restoration builds on the road.\u003c\/p\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eDifficulty:\u003c\/strong\u003e Advanced  |  \u003cstrong\u003eTypical time:\u003c\/strong\u003e 4–10 hours per panel  |  \u003cstrong\u003eWelding required:\u003c\/strong\u003e yes.\u003c\/p\u003e\u003cp\u003eQuarters and corners are cut-and-weld repairs. Map the factory seams first, cut the old panel back to sound metal, and hang the new pressing with clamps to check line-up against the tailgate, door and wheel arch before welding. Plug-weld at factory locations, work in short sequences to control heat, and dress the welds before priming. On the bench this is the most satisfying repair on the truck; rushed, it's the most visible mistake.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTools:\u003c\/strong\u003e spot-weld drill, MIG welder, panel clamps, hammer and dolly, seam sealer.\u003cbr\u003e\u003cstrong\u003eCommon mistakes to avoid:\u003c\/strong\u003e welding long continuous beads that warp the panel, ignoring the inner structure behind the quarter, and trusting the old panel's position when it was already sagging.\u003c\/p\u003e\u003cp\u003eIf you are not an experienced welder, we recommend professional installation for this panel — it is structural, and correct seam welding matters for both safety and finish.\u003c\/p\u003e\u003ch2\u003eQuality \u0026amp; Manufacturing\u003c\/h2\u003e\u003cp\u003eBodyBros replica panels are pressed on dedicated tooling developed from measured original panels, in automotive-grade material matched to the application. Pressings are checked against reference bucks for profile, flange geometry and hole placement before packing. Steel panels are supplied with a protective primer coating ready for preparation and refinishing; alloy and plastic parts are supplied ready to prepare and paint. These are aftermarket replica restoration parts — manufactured by BodyBros, not by the original vehicle maker.\u003c\/p\u003e\u003ch2\u003eWorldwide Delivery\u003c\/h2\u003e\u003cp\u003eWe ship worldwide — including the United States, Canada, the UK, Europe, Australia and New Zealand. Panels are packed in purpose-built cartons or timber crates depending on size; large assemblies travel by sea or air freight with tracking. Duties and taxes are calculated at checkout or on arrival depending on destination. See our \u003ca href=\"\/pages\/shipping\"\u003eShipping \u0026amp; Delivery\u003c\/a\u003e page for lead times to your region.\u003c\/p\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003ch3\u003eWill this panel fit my Land Rover Defender?\u003c\/h3\u003e\u003cp\u003eIt fits 1983–2016 models as listed above. Defender 90 and 110 share most front-end and bulkhead panels; rear body, floor, sill and roof parts are usually wheelbase-specific. Always match the panel to your era — Tdi (1990–1998), Td5 (1998–2007) or Td4\/Puma (2007–2016) — and to 90 or 110 as listed. Left- and right-hand-drive matter for bulkhead, dash and some fittings.\u003c\/p\u003e\u003ch3\u003eIs welding required to install it?\u003c\/h3\u003e\u003cp\u003eYes — this is a welded structural panel. It should be trial-fitted, clamped and plug-welded at the factory seam locations, ideally by an experienced welder.\u003c\/p\u003e\u003ch3\u003eCan it replace a rusted original panel?\u003c\/h3\u003e\u003cp\u003eYes — that is exactly what it is made for. The Land Rover Defender commonly rusts in the steel bulkhead and footwells, door frames and bottoms, B\/C-pillars, rear crossmember, seat box and floor supports — plus galvanic corrosion wherever alloy panels meet steel, and this replica pressing replaces corroded original metal with new aluminium — no donor vehicle required.\u003c\/p\u003e\u003ch3\u003eDo you ship this internationally?\u003c\/h3\u003e\u003cp\u003eYes. We ship worldwide with tracked freight; larger panels and assemblies travel in purpose-built crates. Delivery times and freight options for your country are shown at checkout and on our Shipping page.\u003c\/p\u003e\u003ch3\u003eWhat finish does the panel arrive in?\u003c\/h3\u003e\u003cp\u003eIt arrives ready for preparation and paint. Like any replacement body panel, it should be test-fitted, prepared and refinished before final installation.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eBodyBros is an independent manufacturer of replica restoration panels. Vehicle make and model names are used for fitment identification only; BodyBros products are aftermarket parts and BodyBros is not affiliated with or endorsed by Land Rover (Jaguar Land Rover).\u003c\/em\u003e\u003c\/p\u003e\u003cp\u003e\u003cem\u003eExplore more: \u003ca href=\"\/collections\/land-rover-defender\"\u003eall Land Rover Defender panels\u003c\/a\u003e · \u003ca href=\"\/collections\/panels-side-panels\"\u003equarter, corner \u0026amp; side panels\u003c\/a\u003e · \u003ca href=\"\/blogs\/knowledge\/choosing-reproduction-body-panels\"\u003ehow to choose reproduction panels\u003c\/a\u003e\u003c\/em\u003e\u003c\/p\u003e","brand":"BodyBros","offers":[{"title":"Default Title","offer_id":44126717739073,"sku":"SYC-LR01-20L(90) W\/0","price":417.58,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/1468\/8321\/files\/SYC-LR01-20L_90_W-O_64d5abdd-6ed0-46d4-a0ff-71d63ba82ae8.jpg?v=1783303696"},{"product_id":"land-rover-defender-110-side-panel-frame-rh","title":"Side Panel Frame, RH (Td4) – for Land Rover Defender 110 (Aluminium)","description":"\u003cp\u003eSave your restoration hours for the work that shows: this replica side panel frame suits 1983–2016 Land Rover Defender builds, right-hand (RH) side and replaces panels that would cost more in repair labour than they are worth. Manufactured in aluminium to match the original pressing, it fits the way the panel it replaces once did — without the rust, dents or filler.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFits\u003c\/th\u003e\n\u003ctd\u003eLand Rover Defender\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eYears\u003c\/th\u003e\n\u003ctd\u003e1983–2016\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePanel type\u003c\/th\u003e\n\u003ctd\u003eQuarter, Corner \u0026amp; Side Panels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSide\u003c\/th\u003e\n\u003ctd\u003eRI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eEngine era\u003c\/th\u003e\n\u003ctd\u003eTd4\/Puma (2007–2016)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSKU\u003c\/th\u003e\n\u003ctd\u003eSYC-LR01-20R(110)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eSupplied ready for prep and paint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eInstallation\u003c\/th\u003e\n\u003ctd\u003eAdvanced — approx. 4–10 hours per panel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWelding required\u003c\/th\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eThis panel fits the \u003cstrong\u003eLand Rover Defender\u003c\/strong\u003e, model years \u003cstrong\u003e1983–2016\u003c\/strong\u003e, Td4\/Puma (2007–2016) era. Defender 90 and 110 share most front-end and bulkhead panels; rear body, floor, sill and roof parts are usually wheelbase-specific. Always match the panel to your era — Tdi (1990–1998), Td5 (1998–2007) or Td4\/Puma (2007–2016) — and to 90 or 110 as listed. Left- and right-hand-drive matter for bulkhead, dash and some fittings.\u003c\/p\u003e\u003cp\u003eAs with any reproduction panel, trial-fit against the vehicle before final welding or paint. Minor adjustment at flanges and mounting points is a normal part of professional panel fitting, even with precision replica pressings.\u003c\/p\u003e\u003ch2\u003eSkip the rust bucket rescue\u003c\/h2\u003e\u003cp\u003eThe oldroute to a straight Land Rover Defender body was buying a second parts vehicle and hoping its panel was better than yours. That gamble costs storage, freight and usually disappointment — donor panels carry the same decades of corrosion in the same places. New replica steel ends the cycle: predictable cost, predictable fit, and every panel of your actual vehicle preserved.\u003c\/p\u003e\u003ch2\u003eAbout the Land Rover Defender\u003c\/h2\u003e\u003cp\u003eThe Land Rover Defender — and the One Ten \/ Ninety models that preceded the name — was built in Solihull from 1983 to 2016 on a body architecture Land Rover kept deliberately simple: aluminium alloy outer panels (Birmabright-derived alloys) hung on a steel bulkhead, steel door frames and a steel ladder chassis. That mix is the Defender's blessing and its curse. The alloy skins shrug off surface rust, but the steel structure beneath — bulkhead, door frames, B- and C-pillars, crossmembers and the boot floor supports — corrodes aggressively, and galvanic reaction where alloy meets steel eats panels from the joint outward.\u003c\/p\u003e\u003cp\u003eDefenders span three main mechanical eras that matter for body parts: the coil-sprung Tdi era (200Tdi\/300Tdi, 1990–1998), the Td5 era (1998–2007) and the Puma\/Td4 era (2007–2016). Body details — dash and bulkhead pressings, fender tops, door construction, seat boxes and floor assemblies — changed at each step, so Defender panels are usually listed as Tdi, Td5 or Td4\/Puma specific. With production ended and Land Rover Classic parts pricing climbing, quality reproduction panels have become the standard way to keep working Defenders and restoration builds on the road.\u003c\/p\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eDifficulty:\u003c\/strong\u003e Advanced  |  \u003cstrong\u003eTypical time:\u003c\/strong\u003e 4–10 hours per panel  |  \u003cstrong\u003eWelding required:\u003c\/strong\u003e yes.\u003c\/p\u003e\u003cp\u003eQuarters and corners are cut-and-weld repairs. Map the factory seams first, cut the old panel back to sound metal, and hang the new pressing with clamps to check line-up against the tailgate, door and wheel arch before welding. Plug-weld at factory locations, work in short sequences to control heat, and dress the welds before priming. On the bench this is the most satisfying repair on the truck; rushed, it's the most visible mistake.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTools:\u003c\/strong\u003e spot-weld drill, MIG welder, panel clamps, hammer and dolly, seam sealer.\u003cbr\u003e\u003cstrong\u003eCommon mistakes to avoid:\u003c\/strong\u003e welding long continuous beads that warp the panel, ignoring the inner structure behind the quarter, and trusting the old panel's position when it was already sagging.\u003c\/p\u003e\u003cp\u003eIf you are not an experienced welder, we recommend professional installation for this panel — it is structural, and correct seam welding matters for both safety and finish.\u003c\/p\u003e\u003ch2\u003eQuality \u0026amp; Manufacturing\u003c\/h2\u003e\u003cp\u003eBodyBros replica panels are pressed on dedicated tooling developed from measured original panels, in automotive-grade material matched to the application. Pressings are checked against reference bucks for profile, flange geometry and hole placement before packing. Steel panels are supplied with a protective primer coating ready for preparation and refinishing; alloy and plastic parts are supplied ready to prepare and paint. These are aftermarket replica restoration parts — manufactured by BodyBros, not by the original vehicle maker.\u003c\/p\u003e\u003ch2\u003eWorldwide Delivery\u003c\/h2\u003e\u003cp\u003eWe ship worldwide — including the United States, Canada, the UK, Europe, Australia and New Zealand. Panels are packed in purpose-built cartons or timber crates depending on size; large assemblies travel by sea or air freight with tracking. Duties and taxes are calculated at checkout or on arrival depending on destination. See our \u003ca href=\"\/pages\/shipping\"\u003eShipping \u0026amp; Delivery\u003c\/a\u003e page for lead times to your region.\u003c\/p\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003ch3\u003eWill this panel fit my Land Rover Defender?\u003c\/h3\u003e\u003cp\u003eIt fits 1983–2016 models as listed above. Defender 90 and 110 share most front-end and bulkhead panels; rear body, floor, sill and roof parts are usually wheelbase-specific. Always match the panel to your era — Tdi (1990–1998), Td5 (1998–2007) or Td4\/Puma (2007–2016) — and to 90 or 110 as listed. Left- and right-hand-drive matter for bulkhead, dash and some fittings.\u003c\/p\u003e\u003ch3\u003eIs welding required to install it?\u003c\/h3\u003e\u003cp\u003eYes — this is a welded structural panel. It should be trial-fitted, clamped and plug-welded at the factory seam locations, ideally by an experienced welder.\u003c\/p\u003e\u003ch3\u003eCan it replace a rusted original panel?\u003c\/h3\u003e\u003cp\u003eYes — that is exactly what it is made for. The Land Rover Defender commonly rusts in the steel bulkhead and footwells, door frames and bottoms, B\/C-pillars, rear crossmember, seat box and floor supports — plus galvanic corrosion wherever alloy panels meet steel, and this replica pressing replaces corroded original metal with new aluminium — no donor vehicle required.\u003c\/p\u003e\u003ch3\u003eDo you ship this internationally?\u003c\/h3\u003e\u003cp\u003eYes. We ship worldwide with tracked freight; larger panels and assemblies travel in purpose-built crates. Delivery times and freight options for your country are shown at checkout and on our Shipping page.\u003c\/p\u003e\u003ch3\u003eWhat finish does the panel arrive in?\u003c\/h3\u003e\u003cp\u003eIt arrives ready for preparation and paint. Like any replacement body panel, it should be test-fitted, prepared and refinished before final installation.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eBodyBros is an independent manufacturer of replica restoration panels. Vehicle make and model names are used for fitment identification only; BodyBros products are aftermarket parts and BodyBros is not affiliated with or endorsed by Land Rover (Jaguar Land Rover).\u003c\/em\u003e\u003c\/p\u003e\u003cp\u003e\u003cem\u003eExplore more: \u003ca href=\"\/collections\/land-rover-defender\"\u003eall Land Rover Defender panels\u003c\/a\u003e · \u003ca href=\"\/collections\/panels-side-panels\"\u003equarter, corner \u0026amp; side panels\u003c\/a\u003e · \u003ca href=\"\/blogs\/knowledge\/choosing-reproduction-body-panels\"\u003ehow to choose reproduction panels\u003c\/a\u003e\u003c\/em\u003e\u003c\/p\u003e","brand":"BodyBros","offers":[{"title":"Default Title","offer_id":44126718165057,"sku":"SYC-LR01-20R(110)","price":556.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/1468\/8321\/files\/SY-LR01-20R_110_-001_b28547aa-2dc0-48a0-baa7-91d50d34f18c.jpg?v=1783303697"},{"product_id":"land-rover-defender-90-side-panel-frame-rh","title":"Side Panel Frame, RH – for Land Rover Defender 90 (Aluminium)","description":"\u003cp\u003eA direct-fit replica side panel frame for 1983–2016 Land Rover Defender restorations, right-hand (RH) side. Stamped in aluminium to original-style contours so it lines up with existing seams, gaps and hardware locations — the fastest route from rust bucket to straight body without sacrificing a donor car.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFits\u003c\/th\u003e\n\u003ctd\u003eLand Rover Defender\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eYears\u003c\/th\u003e\n\u003ctd\u003e1983–2016\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePanel type\u003c\/th\u003e\n\u003ctd\u003eQuarter, Corner \u0026amp; Side Panels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSide\u003c\/th\u003e\n\u003ctd\u003eRI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSKU\u003c\/th\u003e\n\u003ctd\u003eSYC-LR01-20R(90）\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eSupplied ready for prep and paint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eInstallation\u003c\/th\u003e\n\u003ctd\u003eAdvanced — approx. 4–10 hours per panel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWelding required\u003c\/th\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eThis panel fits the \u003cstrong\u003eLand Rover Defender\u003c\/strong\u003e, model years \u003cstrong\u003e1983–2016\u003c\/strong\u003e. Defender 90 and 110 share most front-end and bulkhead panels; rear body, floor, sill and roof parts are usually wheelbase-specific. Always match the panel to your era — Tdi (1990–1998), Td5 (1998–2007) or Td4\/Puma (2007–2016) — and to 90 or 110 as listed. Left- and right-hand-drive matter for bulkhead, dash and some fittings.\u003c\/p\u003e\u003cp\u003eAs with any reproduction panel, trial-fit against the vehicle before final welding or paint. Minor adjustment at flanges and mounting points is a normal part of professional panel fitting, even with precision replica pressings.\u003c\/p\u003e\u003ch2\u003eThe maths of new steel\u003c\/h2\u003e\u003cp\u003eRestorers rarely regret buying a new panel; they regret the three weekends spent trying to save an old one first. Repairing a corroded panel means paying for blasting, fabrication time and filler — and the result is still fifty-year-old metal. A replica pressing costs a known amount, arrives straight, and spares a donor vehicle from being cut up for parts. Your original panel can stay with the vehicle for provenance; your build gets metal you can trust.\u003c\/p\u003e\u003ch2\u003eAbout the Land Rover Defender\u003c\/h2\u003e\u003cp\u003eThe Land Rover Defender — and the One Ten \/ Ninety models that preceded the name — was built in Solihull from 1983 to 2016 on a body architecture Land Rover kept deliberately simple: aluminium alloy outer panels (Birmabright-derived alloys) hung on a steel bulkhead, steel door frames and a steel ladder chassis. That mix is the Defender's blessing and its curse. The alloy skins shrug off surface rust, but the steel structure beneath — bulkhead, door frames, B- and C-pillars, crossmembers and the boot floor supports — corrodes aggressively, and galvanic reaction where alloy meets steel eats panels from the joint outward.\u003c\/p\u003e\u003cp\u003eDefenders span three main mechanical eras that matter for body parts: the coil-sprung Tdi era (200Tdi\/300Tdi, 1990–1998), the Td5 era (1998–2007) and the Puma\/Td4 era (2007–2016). Body details — dash and bulkhead pressings, fender tops, door construction, seat boxes and floor assemblies — changed at each step, so Defender panels are usually listed as Tdi, Td5 or Td4\/Puma specific. With production ended and Land Rover Classic parts pricing climbing, quality reproduction panels have become the standard way to keep working Defenders and restoration builds on the road.\u003c\/p\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eDifficulty:\u003c\/strong\u003e Advanced  |  \u003cstrong\u003eTypical time:\u003c\/strong\u003e 4–10 hours per panel  |  \u003cstrong\u003eWelding required:\u003c\/strong\u003e yes.\u003c\/p\u003e\u003cp\u003eQuarters and corners are cut-and-weld repairs. Map the factory seams first, cut the old panel back to sound metal, and hang the new pressing with clamps to check line-up against the tailgate, door and wheel arch before welding. Plug-weld at factory locations, work in short sequences to control heat, and dress the welds before priming. On the bench this is the most satisfying repair on the truck; rushed, it's the most visible mistake.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTools:\u003c\/strong\u003e spot-weld drill, MIG welder, panel clamps, hammer and dolly, seam sealer.\u003cbr\u003e\u003cstrong\u003eCommon mistakes to avoid:\u003c\/strong\u003e welding long continuous beads that warp the panel, ignoring the inner structure behind the quarter, and trusting the old panel's position when it was already sagging.\u003c\/p\u003e\u003cp\u003eIf you are not an experienced welder, we recommend professional installation for this panel — it is structural, and correct seam welding matters for both safety and finish.\u003c\/p\u003e\u003ch2\u003eQuality \u0026amp; Manufacturing\u003c\/h2\u003e\u003cp\u003eBodyBros replica panels are pressed on dedicated tooling developed from measured original panels, in automotive-grade material matched to the application. Pressings are checked against reference bucks for profile, flange geometry and hole placement before packing. Steel panels are supplied with a protective primer coating ready for preparation and refinishing; alloy and plastic parts are supplied ready to prepare and paint. These are aftermarket replica restoration parts — manufactured by BodyBros, not by the original vehicle maker.\u003c\/p\u003e\u003ch2\u003eWorldwide Delivery\u003c\/h2\u003e\u003cp\u003eWe ship worldwide — including the United States, Canada, the UK, Europe, Australia and New Zealand. Panels are packed in purpose-built cartons or timber crates depending on size; large assemblies travel by sea or air freight with tracking. Duties and taxes are calculated at checkout or on arrival depending on destination. See our \u003ca href=\"\/pages\/shipping\"\u003eShipping \u0026amp; Delivery\u003c\/a\u003e page for lead times to your region.\u003c\/p\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003ch3\u003eWill this panel fit my Land Rover Defender?\u003c\/h3\u003e\u003cp\u003eIt fits 1983–2016 models as listed above. Defender 90 and 110 share most front-end and bulkhead panels; rear body, floor, sill and roof parts are usually wheelbase-specific. Always match the panel to your era — Tdi (1990–1998), Td5 (1998–2007) or Td4\/Puma (2007–2016) — and to 90 or 110 as listed. Left- and right-hand-drive matter for bulkhead, dash and some fittings.\u003c\/p\u003e\u003ch3\u003eIs welding required to install it?\u003c\/h3\u003e\u003cp\u003eYes — this is a welded structural panel. It should be trial-fitted, clamped and plug-welded at the factory seam locations, ideally by an experienced welder.\u003c\/p\u003e\u003ch3\u003eCan it replace a rusted original panel?\u003c\/h3\u003e\u003cp\u003eYes — that is exactly what it is made for. The Land Rover Defender commonly rusts in the steel bulkhead and footwells, door frames and bottoms, B\/C-pillars, rear crossmember, seat box and floor supports — plus galvanic corrosion wherever alloy panels meet steel, and this replica pressing replaces corroded original metal with new aluminium — no donor vehicle required.\u003c\/p\u003e\u003ch3\u003eDo you ship this internationally?\u003c\/h3\u003e\u003cp\u003eYes. We ship worldwide with tracked freight; larger panels and assemblies travel in purpose-built crates. Delivery times and freight options for your country are shown at checkout and on our Shipping page.\u003c\/p\u003e\u003ch3\u003eWhat finish does the panel arrive in?\u003c\/h3\u003e\u003cp\u003eIt arrives ready for preparation and paint. Like any replacement body panel, it should be test-fitted, prepared and refinished before final installation.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eBodyBros is an independent manufacturer of replica restoration panels. Vehicle make and model names are used for fitment identification only; BodyBros products are aftermarket parts and BodyBros is not affiliated with or endorsed by Land Rover (Jaguar Land Rover).\u003c\/em\u003e\u003c\/p\u003e\u003cp\u003e\u003cem\u003eExplore more: \u003ca href=\"\/collections\/land-rover-defender\"\u003eall Land Rover Defender panels\u003c\/a\u003e · \u003ca href=\"\/collections\/panels-side-panels\"\u003equarter, corner \u0026amp; side panels\u003c\/a\u003e · \u003ca href=\"\/blogs\/knowledge\/choosing-reproduction-body-panels\"\u003ehow to choose reproduction panels\u003c\/a\u003e\u003c\/em\u003e\u003c\/p\u003e","brand":"BodyBros","offers":[{"title":"Default Title","offer_id":44126718197825,"sku":"SYC-LR01-20R(90）","price":556.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/1468\/8321\/files\/SYC-LR01-20R_90_0eb15154-87c9-4486-ae27-22e40f5ed12f.jpg?v=1783303698"},{"product_id":"land-rover-defender-90-side-panel-frame-rh-aluminium","title":"Side Panel Frame, RH (without Window Aperture) – for Land Rover Defender 90 (Aluminium)","description":"\u003cp\u003eThis side panel frame is a precision replica panel made to suit the Land Rover Defender (1983–2016), pressed in aluminium to the original-style profile for the right-hand (RH) side. Instead of spending weekends cutting rust out of fifty-year-old steel — or hunting down a donor vehicle for one usable panel — you start with straight, new metal that is ready for preparation and paint.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFits\u003c\/th\u003e\n\u003ctd\u003eLand Rover Defender\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eYears\u003c\/th\u003e\n\u003ctd\u003e1983–2016\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePanel type\u003c\/th\u003e\n\u003ctd\u003eQuarter, Corner \u0026amp; Side Panels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSide\u003c\/th\u003e\n\u003ctd\u003eRI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSKU\u003c\/th\u003e\n\u003ctd\u003eSYC-LR01-20R(90) W\/O\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eSupplied ready for prep and paint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eInstallation\u003c\/th\u003e\n\u003ctd\u003eAdvanced — approx. 4–10 hours per panel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWelding required\u003c\/th\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eThis panel fits the \u003cstrong\u003eLand Rover Defender\u003c\/strong\u003e, model years \u003cstrong\u003e1983–2016\u003c\/strong\u003e. Defender 90 and 110 share most front-end and bulkhead panels; rear body, floor, sill and roof parts are usually wheelbase-specific. Always match the panel to your era — Tdi (1990–1998), Td5 (1998–2007) or Td4\/Puma (2007–2016) — and to 90 or 110 as listed. Left- and right-hand-drive matter for bulkhead, dash and some fittings.\u003c\/p\u003e\u003cp\u003eAs with any reproduction panel, trial-fit against the vehicle before final welding or paint. Minor adjustment at flanges and mounting points is a normal part of professional panel fitting, even with precision replica pressings.\u003c\/p\u003e\u003ch2\u003eSkip the rust bucket rescue\u003c\/h2\u003e\u003cp\u003eThe oldroute to a straight Land Rover Defender body was buying a second parts vehicle and hoping its panel was better than yours. That gamble costs storage, freight and usually disappointment — donor panels carry the same decades of corrosion in the same places. New replica steel ends the cycle: predictable cost, predictable fit, and every panel of your actual vehicle preserved.\u003c\/p\u003e\u003ch2\u003eAbout the Land Rover Defender\u003c\/h2\u003e\u003cp\u003eThe Land Rover Defender — and the One Ten \/ Ninety models that preceded the name — was built in Solihull from 1983 to 2016 on a body architecture Land Rover kept deliberately simple: aluminium alloy outer panels (Birmabright-derived alloys) hung on a steel bulkhead, steel door frames and a steel ladder chassis. That mix is the Defender's blessing and its curse. The alloy skins shrug off surface rust, but the steel structure beneath — bulkhead, door frames, B- and C-pillars, crossmembers and the boot floor supports — corrodes aggressively, and galvanic reaction where alloy meets steel eats panels from the joint outward.\u003c\/p\u003e\u003cp\u003eDefenders span three main mechanical eras that matter for body parts: the coil-sprung Tdi era (200Tdi\/300Tdi, 1990–1998), the Td5 era (1998–2007) and the Puma\/Td4 era (2007–2016). Body details — dash and bulkhead pressings, fender tops, door construction, seat boxes and floor assemblies — changed at each step, so Defender panels are usually listed as Tdi, Td5 or Td4\/Puma specific. With production ended and Land Rover Classic parts pricing climbing, quality reproduction panels have become the standard way to keep working Defenders and restoration builds on the road.\u003c\/p\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eDifficulty:\u003c\/strong\u003e Advanced  |  \u003cstrong\u003eTypical time:\u003c\/strong\u003e 4–10 hours per panel  |  \u003cstrong\u003eWelding required:\u003c\/strong\u003e yes.\u003c\/p\u003e\u003cp\u003eQuarters and corners are cut-and-weld repairs. Map the factory seams first, cut the old panel back to sound metal, and hang the new pressing with clamps to check line-up against the tailgate, door and wheel arch before welding. Plug-weld at factory locations, work in short sequences to control heat, and dress the welds before priming. On the bench this is the most satisfying repair on the truck; rushed, it's the most visible mistake.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTools:\u003c\/strong\u003e spot-weld drill, MIG welder, panel clamps, hammer and dolly, seam sealer.\u003cbr\u003e\u003cstrong\u003eCommon mistakes to avoid:\u003c\/strong\u003e welding long continuous beads that warp the panel, ignoring the inner structure behind the quarter, and trusting the old panel's position when it was already sagging.\u003c\/p\u003e\u003cp\u003eIf you are not an experienced welder, we recommend professional installation for this panel — it is structural, and correct seam welding matters for both safety and finish.\u003c\/p\u003e\u003ch2\u003eQuality \u0026amp; Manufacturing\u003c\/h2\u003e\u003cp\u003eBodyBros replica panels are pressed on dedicated tooling developed from measured original panels, in automotive-grade material matched to the application. Pressings are checked against reference bucks for profile, flange geometry and hole placement before packing. Steel panels are supplied with a protective primer coating ready for preparation and refinishing; alloy and plastic parts are supplied ready to prepare and paint. These are aftermarket replica restoration parts — manufactured by BodyBros, not by the original vehicle maker.\u003c\/p\u003e\u003ch2\u003eWorldwide Delivery\u003c\/h2\u003e\u003cp\u003eWe ship worldwide — including the United States, Canada, the UK, Europe, Australia and New Zealand. Panels are packed in purpose-built cartons or timber crates depending on size; large assemblies travel by sea or air freight with tracking. Duties and taxes are calculated at checkout or on arrival depending on destination. See our \u003ca href=\"\/pages\/shipping\"\u003eShipping \u0026amp; Delivery\u003c\/a\u003e page for lead times to your region.\u003c\/p\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003ch3\u003eWill this panel fit my Land Rover Defender?\u003c\/h3\u003e\u003cp\u003eIt fits 1983–2016 models as listed above. Defender 90 and 110 share most front-end and bulkhead panels; rear body, floor, sill and roof parts are usually wheelbase-specific. Always match the panel to your era — Tdi (1990–1998), Td5 (1998–2007) or Td4\/Puma (2007–2016) — and to 90 or 110 as listed. Left- and right-hand-drive matter for bulkhead, dash and some fittings.\u003c\/p\u003e\u003ch3\u003eIs welding required to install it?\u003c\/h3\u003e\u003cp\u003eYes — this is a welded structural panel. It should be trial-fitted, clamped and plug-welded at the factory seam locations, ideally by an experienced welder.\u003c\/p\u003e\u003ch3\u003eCan it replace a rusted original panel?\u003c\/h3\u003e\u003cp\u003eYes — that is exactly what it is made for. The Land Rover Defender commonly rusts in the steel bulkhead and footwells, door frames and bottoms, B\/C-pillars, rear crossmember, seat box and floor supports — plus galvanic corrosion wherever alloy panels meet steel, and this replica pressing replaces corroded original metal with new aluminium — no donor vehicle required.\u003c\/p\u003e\u003ch3\u003eDo you ship this internationally?\u003c\/h3\u003e\u003cp\u003eYes. We ship worldwide with tracked freight; larger panels and assemblies travel in purpose-built crates. Delivery times and freight options for your country are shown at checkout and on our Shipping page.\u003c\/p\u003e\u003ch3\u003eWhat finish does the panel arrive in?\u003c\/h3\u003e\u003cp\u003eIt arrives ready for preparation and paint. Like any replacement body panel, it should be test-fitted, prepared and refinished before final installation.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eBodyBros is an independent manufacturer of replica restoration panels. Vehicle make and model names are used for fitment identification only; BodyBros products are aftermarket parts and BodyBros is not affiliated with or endorsed by Land Rover (Jaguar Land Rover).\u003c\/em\u003e\u003c\/p\u003e\u003cp\u003e\u003cem\u003eExplore more: \u003ca href=\"\/collections\/land-rover-defender\"\u003eall Land Rover Defender panels\u003c\/a\u003e · \u003ca href=\"\/collections\/panels-side-panels\"\u003equarter, corner \u0026amp; side panels\u003c\/a\u003e · \u003ca href=\"\/blogs\/knowledge\/choosing-reproduction-body-panels\"\u003ehow to choose reproduction panels\u003c\/a\u003e\u003c\/em\u003e\u003c\/p\u003e","brand":"BodyBros","offers":[{"title":"Default Title","offer_id":44126718230593,"sku":"SYC-LR01-20R(90) W\/O","price":417.58,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/1468\/8321\/files\/SYC-LR01-20R_90_W-O-002_b60c84bb-2404-4fa8-a048-efa205abb1b7.jpg?v=1783303699"},{"product_id":"land-rover-defender-110-side-panel-frame-rh-aluminium","title":"Side Panel Frame, RH (Td4) (without Window Aperture) – for Land Rover Defender 110 (Aluminium)","description":"\u003cp\u003eSave your restoration hours for the work that shows: this replica side panel frame suits 1983–2016 Land Rover Defender builds, right-hand (RH) side and replaces panels that would cost more in repair labour than they are worth. Manufactured in aluminium to match the original pressing, it fits the way the panel it replaces once did — without the rust, dents or filler.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFits\u003c\/th\u003e\n\u003ctd\u003eLand Rover Defender\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eYears\u003c\/th\u003e\n\u003ctd\u003e1983–2016\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePanel type\u003c\/th\u003e\n\u003ctd\u003eQuarter, Corner \u0026amp; Side Panels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSide\u003c\/th\u003e\n\u003ctd\u003eRI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eEngine era\u003c\/th\u003e\n\u003ctd\u003eTd4\/Puma (2007–2016)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSKU\u003c\/th\u003e\n\u003ctd\u003eSYC-LR01-20R(110) W\/O\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eSupplied ready for prep and paint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eInstallation\u003c\/th\u003e\n\u003ctd\u003eAdvanced — approx. 4–10 hours per panel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWelding required\u003c\/th\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eThis panel fits the \u003cstrong\u003eLand Rover Defender\u003c\/strong\u003e, model years \u003cstrong\u003e1983–2016\u003c\/strong\u003e, Td4\/Puma (2007–2016) era. Defender 90 and 110 share most front-end and bulkhead panels; rear body, floor, sill and roof parts are usually wheelbase-specific. Always match the panel to your era — Tdi (1990–1998), Td5 (1998–2007) or Td4\/Puma (2007–2016) — and to 90 or 110 as listed. Left- and right-hand-drive matter for bulkhead, dash and some fittings.\u003c\/p\u003e\u003cp\u003eAs with any reproduction panel, trial-fit against the vehicle before final welding or paint. Minor adjustment at flanges and mounting points is a normal part of professional panel fitting, even with precision replica pressings.\u003c\/p\u003e\u003ch2\u003eWhy replace instead of repair\u003c\/h2\u003e\u003cp\u003eEvery hour spent cutting corrosion out of an original panel is an hour not spent finishing the vehicle — and rust repair is the most open-ended line in any restoration budget. A new replica panel gives you a fixed cost, a known timeline and straight aluminium from day one. No hunting classifieds for a donor Defender, no cutting up a survivor for one usable panel, no discovering that the ‘solid’ second-hand panel you shipped across the country rusted the same way yours did.\u003c\/p\u003e\u003ch2\u003eAbout the Land Rover Defender\u003c\/h2\u003e\u003cp\u003eThe Land Rover Defender — and the One Ten \/ Ninety models that preceded the name — was built in Solihull from 1983 to 2016 on a body architecture Land Rover kept deliberately simple: aluminium alloy outer panels (Birmabright-derived alloys) hung on a steel bulkhead, steel door frames and a steel ladder chassis. That mix is the Defender's blessing and its curse. The alloy skins shrug off surface rust, but the steel structure beneath — bulkhead, door frames, B- and C-pillars, crossmembers and the boot floor supports — corrodes aggressively, and galvanic reaction where alloy meets steel eats panels from the joint outward.\u003c\/p\u003e\u003cp\u003eDefenders span three main mechanical eras that matter for body parts: the coil-sprung Tdi era (200Tdi\/300Tdi, 1990–1998), the Td5 era (1998–2007) and the Puma\/Td4 era (2007–2016). Body details — dash and bulkhead pressings, fender tops, door construction, seat boxes and floor assemblies — changed at each step, so Defender panels are usually listed as Tdi, Td5 or Td4\/Puma specific. With production ended and Land Rover Classic parts pricing climbing, quality reproduction panels have become the standard way to keep working Defenders and restoration builds on the road.\u003c\/p\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eDifficulty:\u003c\/strong\u003e Advanced  |  \u003cstrong\u003eTypical time:\u003c\/strong\u003e 4–10 hours per panel  |  \u003cstrong\u003eWelding required:\u003c\/strong\u003e yes.\u003c\/p\u003e\u003cp\u003eQuarters and corners are cut-and-weld repairs. Map the factory seams first, cut the old panel back to sound metal, and hang the new pressing with clamps to check line-up against the tailgate, door and wheel arch before welding. Plug-weld at factory locations, work in short sequences to control heat, and dress the welds before priming. On the bench this is the most satisfying repair on the truck; rushed, it's the most visible mistake.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTools:\u003c\/strong\u003e spot-weld drill, MIG welder, panel clamps, hammer and dolly, seam sealer.\u003cbr\u003e\u003cstrong\u003eCommon mistakes to avoid:\u003c\/strong\u003e welding long continuous beads that warp the panel, ignoring the inner structure behind the quarter, and trusting the old panel's position when it was already sagging.\u003c\/p\u003e\u003cp\u003eIf you are not an experienced welder, we recommend professional installation for this panel — it is structural, and correct seam welding matters for both safety and finish.\u003c\/p\u003e\u003ch2\u003eQuality \u0026amp; Manufacturing\u003c\/h2\u003e\u003cp\u003eBodyBros replica panels are pressed on dedicated tooling developed from measured original panels, in automotive-grade material matched to the application. Pressings are checked against reference bucks for profile, flange geometry and hole placement before packing. Steel panels are supplied with a protective primer coating ready for preparation and refinishing; alloy and plastic parts are supplied ready to prepare and paint. These are aftermarket replica restoration parts — manufactured by BodyBros, not by the original vehicle maker.\u003c\/p\u003e\u003ch2\u003eWorldwide Delivery\u003c\/h2\u003e\u003cp\u003eWe ship worldwide — including the United States, Canada, the UK, Europe, Australia and New Zealand. Panels are packed in purpose-built cartons or timber crates depending on size; large assemblies travel by sea or air freight with tracking. Duties and taxes are calculated at checkout or on arrival depending on destination. See our \u003ca href=\"\/pages\/shipping\"\u003eShipping \u0026amp; Delivery\u003c\/a\u003e page for lead times to your region.\u003c\/p\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003ch3\u003eWill this panel fit my Land Rover Defender?\u003c\/h3\u003e\u003cp\u003eIt fits 1983–2016 models as listed above. Defender 90 and 110 share most front-end and bulkhead panels; rear body, floor, sill and roof parts are usually wheelbase-specific. Always match the panel to your era — Tdi (1990–1998), Td5 (1998–2007) or Td4\/Puma (2007–2016) — and to 90 or 110 as listed. Left- and right-hand-drive matter for bulkhead, dash and some fittings.\u003c\/p\u003e\u003ch3\u003eIs welding required to install it?\u003c\/h3\u003e\u003cp\u003eYes — this is a welded structural panel. It should be trial-fitted, clamped and plug-welded at the factory seam locations, ideally by an experienced welder.\u003c\/p\u003e\u003ch3\u003eCan it replace a rusted original panel?\u003c\/h3\u003e\u003cp\u003eYes — that is exactly what it is made for. The Land Rover Defender commonly rusts in the steel bulkhead and footwells, door frames and bottoms, B\/C-pillars, rear crossmember, seat box and floor supports — plus galvanic corrosion wherever alloy panels meet steel, and this replica pressing replaces corroded original metal with new aluminium — no donor vehicle required.\u003c\/p\u003e\u003ch3\u003eDo you ship this internationally?\u003c\/h3\u003e\u003cp\u003eYes. We ship worldwide with tracked freight; larger panels and assemblies travel in purpose-built crates. Delivery times and freight options for your country are shown at checkout and on our Shipping page.\u003c\/p\u003e\u003ch3\u003eWhat finish does the panel arrive in?\u003c\/h3\u003e\u003cp\u003eIt arrives ready for preparation and paint. Like any replacement body panel, it should be test-fitted, prepared and refinished before final installation.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eBodyBros is an independent manufacturer of replica restoration panels. Vehicle make and model names are used for fitment identification only; BodyBros products are aftermarket parts and BodyBros is not affiliated with or endorsed by Land Rover (Jaguar Land Rover).\u003c\/em\u003e\u003c\/p\u003e\u003cp\u003e\u003cem\u003eExplore more: \u003ca href=\"\/collections\/land-rover-defender\"\u003eall Land Rover Defender panels\u003c\/a\u003e · \u003ca href=\"\/collections\/panels-side-panels\"\u003equarter, corner \u0026amp; side panels\u003c\/a\u003e · \u003ca href=\"\/blogs\/knowledge\/choosing-reproduction-body-panels\"\u003ehow to choose reproduction panels\u003c\/a\u003e\u003c\/em\u003e\u003c\/p\u003e","brand":"BodyBros","offers":[{"title":"Default Title","offer_id":44126718296129,"sku":"SYC-LR01-20R(110) W\/O","price":417.58,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/1468\/8321\/files\/SYC-LR01-20R_110_W-O-002_8b5656cf-970d-4334-8fcd-b509ddda0cf7.jpg?v=1783303700"}],"url":"https:\/\/rebornretros.com\/collections\/panels-side-panels.oembed","provider":"classicbody","version":"1.0","type":"link"}