{"product_id":"land-rover-defender-90-fender","title":"Fender – for Land Rover Defender 90 (ABS Plastic)","description":"\u003cp\u003eSave your restoration hours for the work that shows: this replica fender suits 1983–2016 Land Rover Defender builds and replaces panels that would cost more in repair labour than they are worth. Manufactured in abs plastic to match the original pressing, it fits the way the panel it replaces once did — without the rust, dents or filler.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFits\u003c\/th\u003e\n\u003ctd\u003eLand Rover Defender\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eYears\u003c\/th\u003e\n\u003ctd\u003e1983–2016\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePanel type\u003c\/th\u003e\n\u003ctd\u003eFenders \u0026amp; Guards\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eABS Plastic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSKU\u003c\/th\u003e\n\u003ctd\u003eSYC-LR01-51\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eSupplied ready for prep and paint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eInstallation\u003c\/th\u003e\n\u003ctd\u003eEasy to Moderate — approx. 2–4 hours per side\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWelding required\u003c\/th\u003e\n\u003ctd\u003eNo — bolt-on \/ transfer fit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eThis fender fits the \u003cstrong\u003eLand Rover Defender\u003c\/strong\u003e, model years \u003cstrong\u003e1983–2016\u003c\/strong\u003e. Defender 90 and 110 share most front-end and bulkhead panels; rear body, floor, sill and roof parts are usually wheelbase-specific. Always match the panel to your era — Tdi (1990–1998), Td5 (1998–2007) or Td4\/Puma (2007–2016) — and to 90 or 110 as listed. Left- and right-hand-drive matter for bulkhead, dash and some fittings.\u003c\/p\u003e\u003cp\u003eAs with any reproduction panel, trial-fit against the vehicle before final welding or paint. Minor adjustment at flanges and mounting points is a normal part of professional panel fitting, even with precision replica pressings.\u003c\/p\u003e\u003ch2\u003eSkip the rust bucket rescue\u003c\/h2\u003e\u003cp\u003eThe oldroute to a straight Land Rover Defender body was buying a second parts vehicle and hoping its fender was better than yours. That gamble costs storage, freight and usually disappointment — donor panels carry the same decades of corrosion in the same places. New replica steel ends the cycle: predictable cost, predictable fit, and every panel of your actual vehicle preserved.\u003c\/p\u003e\u003ch2\u003eAbout the Land Rover Defender\u003c\/h2\u003e\u003cp\u003eThe Land Rover Defender — and the One Ten \/ Ninety models that preceded the name — was built in Solihull from 1983 to 2016 on a body architecture Land Rover kept deliberately simple: aluminium alloy outer panels (Birmabright-derived alloys) hung on a steel bulkhead, steel door frames and a steel ladder chassis. That mix is the Defender's blessing and its curse. The alloy skins shrug off surface rust, but the steel structure beneath — bulkhead, door frames, B- and C-pillars, crossmembers and the boot floor supports — corrodes aggressively, and galvanic reaction where alloy meets steel eats panels from the joint outward.\u003c\/p\u003e\u003cp\u003eDefenders span three main mechanical eras that matter for body parts: the coil-sprung Tdi era (200Tdi\/300Tdi, 1990–1998), the Td5 era (1998–2007) and the Puma\/Td4 era (2007–2016). Body details — dash and bulkhead pressings, fender tops, door construction, seat boxes and floor assemblies — changed at each step, so Defender panels are usually listed as Tdi, Td5 or Td4\/Puma specific. With production ended and Land Rover Classic parts pricing climbing, quality reproduction panels have become the standard way to keep working Defenders and restoration builds on the road.\u003c\/p\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eDifficulty:\u003c\/strong\u003e Easy to Moderate  |  \u003cstrong\u003eTypical time:\u003c\/strong\u003e 2–4 hours per side  |  \u003cstrong\u003eWelding required:\u003c\/strong\u003e no.\u003c\/p\u003e\u003cp\u003eMost classic 4x4 and truck fenders bolt on. Strip the lights and trim from the old panel, test-fit the new fender loose, and set the gaps against the door and hood before final tightening — fender-to-door gap is the one everyone sees. Seal the mounting flanges and inject cavity wax along the lower edge, which is where the original died.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTools:\u003c\/strong\u003e basic hand tools, panel clips, seam sealer, cavity wax.\u003cbr\u003e\u003cstrong\u003eCommon mistakes to avoid:\u003c\/strong\u003e bolting up tight before gapping, forgetting anti-corrosion treatment on the hidden flanges, and re-using crushed mounting hardware.\u003c\/p\u003e\u003ch2\u003eQuality \u0026amp; Manufacturing\u003c\/h2\u003e\u003cp\u003eBodyBros replica panels are pressed on dedicated tooling developed from measured original panels, in automotive-grade material matched to the application. Pressings are checked against reference bucks for profile, flange geometry and hole placement before packing. Steel panels are supplied with a protective primer coating ready for preparation and refinishing; alloy and plastic parts are supplied ready to prepare and paint. These are aftermarket replica restoration parts — manufactured by BodyBros, not by the original vehicle maker.\u003c\/p\u003e\u003ch2\u003eWorldwide Delivery\u003c\/h2\u003e\u003cp\u003eWe ship worldwide — including the United States, Canada, the UK, Europe, Australia and New Zealand. Panels are packed in purpose-built cartons or timber crates depending on size; large assemblies travel by sea or air freight with tracking. Duties and taxes are calculated at checkout or on arrival depending on destination. See our \u003ca href=\"\/pages\/shipping\"\u003eShipping \u0026amp; Delivery\u003c\/a\u003e page for lead times to your region.\u003c\/p\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003ch3\u003eWill this fender fit my Land Rover Defender?\u003c\/h3\u003e\u003cp\u003eIt fits 1983–2016 models as listed above. Defender 90 and 110 share most front-end and bulkhead panels; rear body, floor, sill and roof parts are usually wheelbase-specific. Always match the panel to your era — Tdi (1990–1998), Td5 (1998–2007) or Td4\/Puma (2007–2016) — and to 90 or 110 as listed. Left- and right-hand-drive matter for bulkhead, dash and some fittings.\u003c\/p\u003e\u003ch3\u003eIs welding required to install it?\u003c\/h3\u003e\u003cp\u003eNo. This part installs as a bolt-on or transfer fit using standard hand tools — see the installation notes above.\u003c\/p\u003e\u003ch3\u003eCan it replace a rusted original panel?\u003c\/h3\u003e\u003cp\u003eYes — that is exactly what it is made for. The Land Rover Defender commonly rusts in the steel bulkhead and footwells, door frames and bottoms, B\/C-pillars, rear crossmember, seat box and floor supports — plus galvanic corrosion wherever alloy panels meet steel, and this replica pressing replaces corroded original metal with new abs plastic — no donor vehicle required.\u003c\/p\u003e\u003ch3\u003eDo you ship this internationally?\u003c\/h3\u003e\u003cp\u003eYes. We ship worldwide with tracked freight; larger panels and assemblies travel in purpose-built crates. Delivery times and freight options for your country are shown at checkout and on our Shipping page.\u003c\/p\u003e\u003ch3\u003eWhat finish does the panel arrive in?\u003c\/h3\u003e\u003cp\u003eIt arrives ready for preparation and paint. Like any replacement body panel, it should be test-fitted, prepared and refinished before final installation.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eBodyBros is an independent manufacturer of replica restoration panels. Vehicle make and model names are used for fitment identification only; BodyBros products are aftermarket parts and BodyBros is not affiliated with or endorsed by Land Rover (Jaguar Land Rover).\u003c\/em\u003e\u003c\/p\u003e\u003cp\u003e\u003cem\u003eExplore more: \u003ca href=\"\/collections\/land-rover-defender\"\u003eall Land Rover Defender panels\u003c\/a\u003e · \u003ca href=\"\/collections\/panels-fenders\"\u003efenders \u0026amp; guards\u003c\/a\u003e · \u003ca href=\"\/blogs\/knowledge\/choosing-reproduction-body-panels\"\u003ehow to choose reproduction panels\u003c\/a\u003e\u003c\/em\u003e\u003c\/p\u003e","brand":"BodyBros","offers":[{"title":"Default Title","offer_id":44126711349313,"sku":"SYC-LR01-51","price":72.38,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/1468\/8321\/files\/EF33498C-115F-4664-BFC9-0E6164B96A58_48368260-6c01-4aeb-99ea-6faeedcfac22.jpg?v=1783303520","url":"https:\/\/rebornretros.com\/products\/land-rover-defender-90-fender","provider":"classicbody","version":"1.0","type":"link"}