Hood Hinges – for Toyota Land Cruiser FJ40 & FJ45 (Stainless Steel)

Save your restoration hours for the work that shows: this replica hood hinges suits 1979-1984 Toyota Land Cruiser FJ40 & FJ45 builds and replaces panels that would cost more in repair labour than they are worth. Manufactured in stainless steel to match the original pressing, it fits the way the panel it replaces once did — without the rust, dents or filler.

Specifications

Fitment & Compatibility

This hardware item fits the Toyota Land Cruiser FJ40 & FJ45, model years 1979-1984. This panel fits both FJ40 and FJ45 40-Series bodies. Match your build year and compare pressings with the original panel before final welding, as Toyota revised details across the production run.

As with any reproduction panel, trial-fit against the vehicle before final welding or paint. Minor adjustment at flanges and mounting points is a normal part of professional panel fitting, even with precision replica pressings.

Why replace instead of repair

Every hour spent cutting corrosion out of an original panel is an hour not spent finishing the vehicle — and rust repair is the most open-ended line in any restoration budget. A new replica hardware item gives you a fixed cost, a known timeline and straight stainless steel from day one. No hunting classifieds for a donor FJ45, no cutting up a survivor for one usable panel, no discovering that the ‘solid’ second-hand panel you shipped across the country rusted the same way yours did.

About the Toyota Land Cruiser FJ40 & FJ45

Toyota's 40-Series Land Cruiser — the short-wheelbase FJ40 and long-wheelbase FJ45 — was built from 1960 into the mid-1980s and has become one of the world's most valuable and most restored classic 4x4 platforms. The two models share their front sheet metal, windscreen frame, firewall and much of the cab structure, which is why many reproduction panels fit both. Simple flat-stamped steel construction makes the 40-Series unusually restoration-friendly: panels unbolt or drill out at factory spot-welds and new steel goes in the same way it left the Arakawa body plant.

Every unrestored 40-Series carries corrosion in predictable places — quarters, sills, floors, tailgates, fender aprons and footwells — because Toyota never galvanised the originals. Reproduction panels pressed to factory profiles are the fastest, most cost-effective route back to a straight body.

Installation

Difficulty: Easy  |  Typical time: 15–60 minutes per item  |  Welding required: no.

Replace hardware in matched sets where possible and always when hanging new panels — new door on worn hinges is a wasted door. Grease pivots on assembly, fit with bolts snug, align the panel, then torque. Stainless hardware upgrades resist the corrosion that seized the originals.

Tools: basic hand tools, thread lubricant, grease.
Common mistakes to avoid: hanging new panels on worn hinges and blaming the panel for the sag.

Quality & Manufacturing

BodyBros replica panels are pressed on dedicated tooling developed from measured original panels, in automotive-grade material matched to the application. Pressings are checked against reference bucks for profile, flange geometry and hole placement before packing. Steel panels are supplied with a protective primer coating ready for preparation and refinishing; alloy and plastic parts are supplied ready to prepare and paint. These are aftermarket replica restoration parts — manufactured by BodyBros, not by the original vehicle maker.

Worldwide Delivery

We ship worldwide — including the United States, Canada, the UK, Europe, Australia and New Zealand. Panels are packed in purpose-built cartons or timber crates depending on size; large assemblies travel by sea or air freight with tracking. Duties and taxes are calculated at checkout or on arrival depending on destination. See our Shipping & Delivery page for lead times to your region.

Frequently Asked Questions

Will this hardware item fit my Toyota Land Cruiser FJ40 & FJ45?

It fits 1979-1984 models as listed above. This panel fits both FJ40 and FJ45 40-Series bodies. Match your build year and compare pressings with the original panel before final welding, as Toyota revised details across the production run.

Is welding required to install it?

No. This part installs as a bolt-on or transfer fit using standard hand tools — see the installation notes above.

Can it replace a rusted original panel?

Yes — that is exactly what it is made for. The Toyota Land Cruiser FJ40 & FJ45 commonly rusts in quarter panels, sills, floor pans, tailgates, fender aprons and footwells, and this replica pressing replaces corroded original metal with new stainless steel — no donor vehicle required.

Do you ship this internationally?

Yes. We ship worldwide with tracked freight; larger panels and assemblies travel in purpose-built crates. Delivery times and freight options for your country are shown at checkout and on our Shipping page.

What finish does the panel arrive in?

It arrives ready for preparation and paint. Like any replacement body panel, it should be test-fitted, prepared and refinished before final installation.

BodyBros is an independent manufacturer of replica restoration panels. Vehicle make and model names are used for fitment identification only; BodyBros products are aftermarket parts and BodyBros is not affiliated with or endorsed by Toyota.

Explore more: all Toyota Land Cruiser FJ40 & FJ45 panels · hinges, locks & hardware · how to choose reproduction panels