Replica Rear 1/2 Body Tub – for Toyota Land Cruiser FJ40 (Steel)

Save your restoration hours for the work that shows: this replica rear 1/2 body tub suits 1960–1984 Toyota Land Cruiser FJ40 builds and replaces panels that would cost more in repair labour than they are worth. Manufactured in steel to match the original pressing, it fits the way the panel it replaces once did — without the rust, dents or filler.

Specifications

Fitment & Compatibility

This body assembly fits the Toyota Land Cruiser FJ40, model years 1960–1984. FJ40 bodies changed in detail over the production run — most noticeably at the 1973–74 update and the 1979 facelift — so always match the panel to your build year and compare pressings with your original before final fitting. Left-hand-drive and right-hand-drive bodies share most panels; firewall, dash and some cowl parts are drive-side specific.

As with any reproduction panel, trial-fit against the vehicle before final welding or paint. Minor adjustment at flanges and mounting points is a normal part of professional panel fitting, even with precision replica pressings.

Why replace instead of repair

Every hour spent cutting corrosion out of an original panel is an hour not spent finishing the vehicle — and rust repair is the most open-ended line in any restoration budget. A new replica body assembly gives you a fixed cost, a known timeline and straight steel from day one. No hunting classifieds for a donor FJ40, no cutting up a survivor for one usable panel, no discovering that the ‘solid’ second-hand panel you shipped across the country rusted the same way yours did.

About the Toyota Land Cruiser FJ40

The Toyota Land Cruiser FJ40 is one of the most restored four-wheel drives on earth. Built from 1960 to 1984, the short-wheelbase FJ40 earned its reputation on mine sites, farms and expedition routes across Australia, Africa, South America and North America, powered for most of its life by the 3.9-litre F and 4.2-litre 2F inline-six petrol engines (with BJ40/HJ45 diesel siblings sharing the same body). Toyota built the FJ40 with simple, flat-stamped panels and a bolt-together tub, which is exactly why so many survive today — and why reproduction body panels can return even a badly corroded example to factory shape.

Because the FJ40 worked hard and lived outdoors, nearly every survivor carries rust in the same places: the rear quarter panels and lower corners, the rear sill and floor braces, the tailgate skins, the front fender aprons, the firewall footwells and the windscreen frame. Original Toyota steel was never galvanised, and fifty years of trapped mud between the body and the chassis outriggers does the rest. Replacing rusted sections with correctly stamped reproduction panels is the accepted restoration method — patching heavily pitted original steel almost always costs more in labour than fitting a new panel.

Installation

Difficulty: Professional / experienced builder  |  Typical time: 1–3 days for removal and replacement, excluding refit  |  Welding required: no.

A complete assembly replaces unbolt-and-lift structure: disconnect wiring, fuel and brake lines routed through the body, unbolt the mounts, and lift the old structure off the chassis. Inspect and refurbish chassis outriggers and mounts before the new assembly goes on — new body on rusty mounts is wasted money. Shim to factory alignment before final torque, then transfer doors and hardware and set all gaps. These assemblies ship by international sea freight in dedicated crates; inspect on delivery and photograph the crate before opening.

Tools: engine crane or several helpers, body-mount hardware, alignment datums, transport-damage inspection kit.
Common mistakes to avoid: fitting to unrestored body mounts, discarding shims, and skipping the delivery inspection.

Quality & Manufacturing

BodyBros replica panels are pressed on dedicated tooling developed from measured original panels, in automotive-grade material matched to the application. Pressings are checked against reference bucks for profile, flange geometry and hole placement before packing. Steel panels are supplied with a protective primer coating ready for preparation and refinishing; alloy and plastic parts are supplied ready to prepare and paint. These are aftermarket replica restoration parts — manufactured by BodyBros, not by the original vehicle maker.

Worldwide Delivery

We ship worldwide — including the United States, Canada, the UK, Europe, Australia and New Zealand. Panels are packed in purpose-built cartons or timber crates depending on size; large assemblies travel by sea or air freight with tracking. Duties and taxes are calculated at checkout or on arrival depending on destination. See our Shipping & Delivery page for lead times to your region.

Frequently Asked Questions

Will this body assembly fit my Toyota Land Cruiser FJ40?

It fits 1960–1984 models as listed above. FJ40 bodies changed in detail over the production run — most noticeably at the 1973–74 update and the 1979 facelift — so always match the panel to your build year and compare pressings with your original before final fitting. Left-hand-drive and right-hand-drive bodies share most panels; firewall, dash and some cowl parts are drive-side specific.

Is welding required to install it?

No. This part installs as a bolt-on or transfer fit using standard hand tools — see the installation notes above.

Can it replace a rusted original panel?

Yes — that is exactly what it is made for. The Toyota Land Cruiser FJ40 commonly rusts in rear quarter panels, lower rear corners, sills, floor pans, tailgate skins, fender aprons and the firewall footwells, and this replica pressing replaces corroded original metal with new steel — no donor vehicle required.

Do you ship this internationally?

Yes. We ship worldwide with tracked freight; larger panels and assemblies travel in purpose-built crates. Delivery times and freight options for your country are shown at checkout and on our Shipping page.

What finish does the panel arrive in?

It arrives ready for preparation and paint. Like any replacement body panel, it should be test-fitted, prepared and refinished before final installation.

BodyBros is an independent manufacturer of replica restoration panels. Vehicle make and model names are used for fitment identification only; BodyBros products are aftermarket parts and BodyBros is not affiliated with or endorsed by Toyota.

Explore more: all Toyota Land Cruiser FJ40 panels · tubs, cabs & body assemblies · how to choose reproduction panels