Truck Bed Fender, RH – for Toyota Land Cruiser FJ40 & FJ45 (Steel)

A direct-fit replica truck bed fender for 1968-1978,1979-1984 Toyota Land Cruiser FJ40 & FJ45 restorations, right-hand (RH) side. Stamped in steel to original-style contours so it lines up with existing seams, gaps and hardware locations — the fastest route from rust bucket to straight body without sacrificing a donor car.

Specifications

Fitment & Compatibility

This bed panel fits the Toyota Land Cruiser FJ40 & FJ45, model years 1968-1978,1979-1984. This panel fits both FJ40 and FJ45 40-Series bodies. Match your build year and compare pressings with the original panel before final welding, as Toyota revised details across the production run.

As with any reproduction panel, trial-fit against the vehicle before final welding or paint. Minor adjustment at flanges and mounting points is a normal part of professional panel fitting, even with precision replica pressings.

Skip the rust bucket rescue

The oldroute to a straight Toyota Land Cruiser FJ40 & FJ45 body was buying a second parts vehicle and hoping its bed panel was better than yours. That gamble costs storage, freight and usually disappointment — donor panels carry the same decades of corrosion in the same places. New replica steel ends the cycle: predictable cost, predictable fit, and every panel of your actual vehicle preserved.

About the Toyota Land Cruiser FJ40 & FJ45

Toyota's 40-Series Land Cruiser — the short-wheelbase FJ40 and long-wheelbase FJ45 — was built from 1960 into the mid-1980s and has become one of the world's most valuable and most restored classic 4x4 platforms. The two models share their front sheet metal, windscreen frame, firewall and much of the cab structure, which is why many reproduction panels fit both. Simple flat-stamped steel construction makes the 40-Series unusually restoration-friendly: panels unbolt or drill out at factory spot-welds and new steel goes in the same way it left the Arakawa body plant.

Every unrestored 40-Series carries corrosion in predictable places — quarters, sills, floors, tailgates, fender aprons and footwells — because Toyota never galvanised the originals. Reproduction panels pressed to factory profiles are the fastest, most cost-effective route back to a straight body.

Installation

Difficulty: Moderate to Advanced  |  Typical time: half a day to a weekend depending on scope  |  Welding required: yes.

Bed construction mixes bolted and welded joints — map which is which on your truck before cutting. Replace cross-sills at the same time as floors if they're scaling, and seal every overlap seam; bed seams are the original failure point. Bolt-on bed fenders and rails follow normal gap-and-fit practice.

Tools: spot-weld drill, MIG welder for welded sections, basic hand tools for bolt-on parts, seam sealer.
Common mistakes to avoid: laying a new floor over rotten cross-sills, and leaving overlap seams open to catch water again.

If you are not an experienced welder, we recommend professional installation for this panel — it is structural, and correct seam welding matters for both safety and finish.

Quality & Manufacturing

BodyBros replica panels are pressed on dedicated tooling developed from measured original panels, in automotive-grade material matched to the application. Pressings are checked against reference bucks for profile, flange geometry and hole placement before packing. Steel panels are supplied with a protective primer coating ready for preparation and refinishing; alloy and plastic parts are supplied ready to prepare and paint. These are aftermarket replica restoration parts — manufactured by BodyBros, not by the original vehicle maker.

Worldwide Delivery

We ship worldwide — including the United States, Canada, the UK, Europe, Australia and New Zealand. Panels are packed in purpose-built cartons or timber crates depending on size; large assemblies travel by sea or air freight with tracking. Duties and taxes are calculated at checkout or on arrival depending on destination. See our Shipping & Delivery page for lead times to your region.

Frequently Asked Questions

Will this bed panel fit my Toyota Land Cruiser FJ40 & FJ45?

It fits 1968-1978,1979-1984 models as listed above. This panel fits both FJ40 and FJ45 40-Series bodies. Match your build year and compare pressings with the original panel before final welding, as Toyota revised details across the production run.

Is welding required to install it?

Yes — this is a welded structural panel. It should be trial-fitted, clamped and plug-welded at the factory seam locations, ideally by an experienced welder.

Can it replace a rusted original panel?

Yes — that is exactly what it is made for. The Toyota Land Cruiser FJ40 & FJ45 commonly rusts in quarter panels, sills, floor pans, tailgates, fender aprons and footwells, and this replica pressing replaces corroded original metal with new steel — no donor vehicle required.

Do you ship this internationally?

Yes. We ship worldwide with tracked freight; larger panels and assemblies travel in purpose-built crates. Delivery times and freight options for your country are shown at checkout and on our Shipping page.

What finish does the panel arrive in?

It arrives ready for preparation and paint. Like any replacement body panel, it should be test-fitted, prepared and refinished before final installation.

BodyBros is an independent manufacturer of replica restoration panels. Vehicle make and model names are used for fitment identification only; BodyBros products are aftermarket parts and BodyBros is not affiliated with or endorsed by Toyota.

Explore more: all Toyota Land Cruiser FJ40 & FJ45 panels · truck beds & trays · how to choose reproduction panels